Intersil
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
X9401WV24T1
Lihat Butiran Helaian data

X9401WV24T1

Product Overview

  • Category: Electronic Component
  • Use: Digital Potentiometer
  • Characteristics:
    • High precision and resolution
    • Wide operating voltage range
    • Low power consumption
    • Compact package size
  • Package: TSSOP-24
  • Essence: X9401WV24T1 is a digital potentiometer designed for various electronic applications. It provides a programmable resistance that can be controlled digitally.
  • Packaging/Quantity: Available in reels of 2500 units.

Specifications

  • Resistance Range: 0Ω to 100kΩ
  • Resolution: 256 steps
  • Operating Voltage Range: 2.7V to 5.5V
  • Temperature Range: -40°C to +85°C
  • Interface: Serial (SPI)
  • Power Supply: Single supply, VDD = 2.7V to 5.5V
  • Total Harmonic Distortion: <0.01%
  • Non-Volatile Memory: Stores wiper position during power-off

Detailed Pin Configuration

The X9401WV24T1 digital potentiometer has the following pin configuration:

  1. VSS - Ground
  2. SCLK - Serial Clock Input
  3. SDI - Serial Data Input
  4. CS - Chip Select Input
  5. VDD - Power Supply
  6. WP - Write Protect Input
  7. HIZ - High Impedance Wiper Output
  8. A - Terminal A Connection
  9. B - Terminal B Connection
  10. W - Wiper Terminal Connection
  11. NC - No Connection
  12. NC - No Connection
  13. NC - No Connection
  14. NC - No Connection
  15. NC - No Connection
  16. NC - No Connection
  17. NC - No Connection
  18. NC - No Connection
  19. NC - No Connection
  20. NC - No Connection
  21. NC - No Connection
  22. NC - No Connection
  23. NC - No Connection
  24. VSS - Ground

Functional Features

  • Programmable resistance with 256 steps for precise control.
  • SPI interface allows easy integration with microcontrollers and other digital systems.
  • Non-volatile memory retains wiper position during power-off, ensuring consistent settings upon power-up.
  • High impedance wiper output (HIZ) enables flexible circuit configurations.
  • Wide operating voltage range makes it suitable for various applications.
  • Low power consumption extends battery life in portable devices.

Advantages and Disadvantages

Advantages: - High precision and resolution provide accurate control. - Compact package size saves board space. - Non-volatile memory ensures consistent settings. - Wide operating voltage range increases versatility. - Low power consumption prolongs battery life.

Disadvantages: - Limited resistance range compared to some other digital potentiometers. - Requires an external microcontroller or digital system for control.

Working Principles

The X9401WV24T1 digital potentiometer operates by using a series of resistive elements connected in a ladder configuration. The wiper terminal can be moved digitally to different positions along the ladder, effectively changing the resistance between the A and B terminals. This allows precise control over the resistance value.

The potentiometer is controlled via a serial interface (SPI), which enables communication with a microcontroller or other digital system. The wiper position can be programmed and stored in non-volatile memory, ensuring that the desired resistance setting is maintained even after power-off.

Detailed Application Field Plans

The X9401WV24T1 digital potentiometer finds applications in various electronic systems, including:

  1. Audio Equipment: Volume control, tone adjustment, and equalization circuits.
  2. Instrumentation: Calibration and signal conditioning circuits.
  3. Industrial Control Systems: Variable gain amplifiers, motor speed control, and feedback circuits.
  4. Communication Systems: Signal level adjustment, impedance matching, and filter tuning.
  5. Automotive Electronics: Climate control, lighting intensity control, and sensor calibration.

Detailed and Complete Alternative Models

  1. X9401WV24T2: Similar to X9401WV24T1 but with extended temperature range (-40°C to +125°C).
  2. X9401WV32T1: Digital potentiometer with 32 steps resolution and TSSOP-32 package.
  3. X9402WV24T1: Dual-channel digital potentiometer with similar specifications as X9401WV24T1.
  4. X9403WV24T1: Triple-channel digital potentiometer with similar specifications as X9401WV24T1.

These alternative models offer different features and options to suit specific application requirements.

*Word count:

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi X9401WV24T1 dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of X9401WV24T1 in technical solutions:

Q1: What is X9401WV24T1? A1: X9401WV24T1 is a specific model of electronic component, typically used as a digital potentiometer in various technical applications.

Q2: What is the purpose of X9401WV24T1? A2: The purpose of X9401WV24T1 is to provide variable resistance or voltage control in electronic circuits, allowing for precise adjustment of parameters such as volume, brightness, or gain.

Q3: How does X9401WV24T1 work? A3: X9401WV24T1 works by digitally controlling the resistance between its input and output pins, using a combination of analog and digital signals.

Q4: What are the key features of X9401WV24T1? A4: Some key features of X9401WV24T1 include its high resolution, low power consumption, wide operating voltage range, and non-volatile memory storage.

Q5: In which technical applications can X9401WV24T1 be used? A5: X9401WV24T1 can be used in a wide range of technical applications, including audio equipment, instrumentation, motor control, and communication systems.

Q6: Can X9401WV24T1 be controlled digitally? A6: Yes, X9401WV24T1 can be controlled digitally through various interfaces such as I2C (Inter-Integrated Circuit) or SPI (Serial Peripheral Interface).

Q7: What is the maximum resistance range of X9401WV24T1? A7: The maximum resistance range of X9401WV24T1 is typically specified by the manufacturer and can vary, but it is commonly in the range of tens to hundreds of kilohms.

Q8: Is X9401WV24T1 suitable for high-speed applications? A8: No, X9401WV24T1 is not typically designed for high-speed applications as it operates at relatively slower speeds compared to other specialized components.

Q9: Can X9401WV24T1 be used in harsh environments? A9: It depends on the specific model and its environmental ratings. Some variants of X9401WV24T1 may have enhanced protection against moisture, temperature, or vibration.

Q10: Are there any alternative components to X9401WV24T1? A10: Yes, there are alternative digital potentiometer components available from different manufacturers, each with their own specifications and features.