LT1460MHS8-2.5#PBF
Product Overview
Category
The LT1460MHS8-2.5#PBF belongs to the category of voltage references.
Use
It is commonly used as a precision reference voltage source in various electronic circuits.
Characteristics
- High accuracy and stability
- Low temperature coefficient
- Wide operating temperature range
- Low output noise
- Low power consumption
Package
The LT1460MHS8-2.5#PBF is available in an 8-pin SOIC package.
Essence
The essence of LT1460MHS8-2.5#PBF lies in its ability to provide a precise and stable reference voltage for accurate circuit operation.
Packaging/Quantity
The product is typically sold in reels or tubes, with a quantity of 250 units per reel/tube.
Specifications
- Output Voltage: 2.5V
- Initial Accuracy: ±0.05%
- Temperature Coefficient: 10ppm/°C
- Operating Temperature Range: -40°C to 125°C
- Output Noise Voltage: 3µVrms (10Hz to 100kHz)
- Supply Voltage Range: 2.7V to 36V
- Quiescent Current: 60µA
Detailed Pin Configuration
The LT1460MHS8-2.5#PBF has the following pin configuration:
- VOUT: Output Voltage
- GND: Ground
- NC: No Connection
- NC: No Connection
- NC: No Connection
- NC: No Connection
- NC: No Connection
- VIN: Input Voltage
Functional Features
- Precise and stable output voltage reference
- Low temperature coefficient ensures minimal drift over temperature variations
- Wide operating temperature range allows for use in various environments
- Low output noise ensures accurate signal processing
- Low power consumption for energy-efficient designs
Advantages and Disadvantages
Advantages
- High accuracy and stability
- Wide operating temperature range
- Low output noise
- Low power consumption
Disadvantages
- Limited output voltage options (fixed at 2.5V)
- Not suitable for applications requiring adjustable reference voltage
Working Principles
The LT1460MHS8-2.5#PBF utilizes a precision bandgap circuit to generate a stable reference voltage. It compensates for temperature variations by employing a feedback mechanism that adjusts the internal voltage reference accordingly. This ensures that the output voltage remains constant over a wide temperature range.
Detailed Application Field Plans
The LT1460MHS8-2.5#PBF finds application in various fields, including:
- Precision analog-to-digital converters (ADCs)
- Digital-to-analog converters (DACs)
- Voltage regulators
- Oscillators and timers
- Sensor interfaces
- Battery management systems
- Test and measurement equipment
Detailed and Complete Alternative Models
- LT1460MHS8-1.8#PBF: Output voltage of 1.8V
- LT1460MHS8-3.0#PBF: Output voltage of 3.0V
- LT1460MHS8-5.0#PBF: Output voltage of 5.0V
- LT1460MHS8-ADJ#PBF: Adjustable output voltage version
These alternative models provide different output voltage options to suit specific application requirements.
Word count: 436 words
Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi LT1460MHS8-2.5#PBF dalam penyelesaian teknikal
Sure! Here are 10 common questions and answers related to the application of LT1460MHS8-2.5#PBF in technical solutions:
Q: What is the LT1460MHS8-2.5#PBF? A: The LT1460MHS8-2.5#PBF is a precision voltage reference IC manufactured by Linear Technology (now part of Analog Devices). It provides a stable and accurate output voltage of 2.5V.
Q: What is the typical application of the LT1460MHS8-2.5#PBF? A: The LT1460MHS8-2.5#PBF is commonly used as a voltage reference in various electronic circuits, such as analog-to-digital converters (ADCs), digital-to-analog converters (DACs), power supplies, and sensor interfaces.
Q: What is the voltage accuracy of the LT1460MHS8-2.5#PBF? A: The LT1460MHS8-2.5#PBF has a voltage accuracy of ±0.4% over the specified temperature range.
Q: What is the operating temperature range of the LT1460MHS8-2.5#PBF? A: The LT1460MHS8-2.5#PBF can operate within a temperature range of -40°C to +85°C.
Q: What is the output current capability of the LT1460MHS8-2.5#PBF? A: The LT1460MHS8-2.5#PBF can source or sink up to 10mA of current.
Q: Is the LT1460MHS8-2.5#PBF a low dropout voltage reference? A: No, the LT1460MHS8-2.5#PBF is not a low dropout voltage reference. It requires a minimum input-output voltage difference of 1V to maintain its specified accuracy.
Q: Can I use the LT1460MHS8-2.5#PBF in battery-powered applications? A: Yes, the LT1460MHS8-2.5#PBF can be used in battery-powered applications as it has a low quiescent current of typically 60µA.
Q: Does the LT1460MHS8-2.5#PBF require an external capacitor for stability? A: Yes, the LT1460MHS8-2.5#PBF requires an external bypass capacitor of at least 1µF for stability and noise reduction.
Q: What is the package type of the LT1460MHS8-2.5#PBF? A: The LT1460MHS8-2.5#PBF is available in an 8-pin SOIC (Small Outline Integrated Circuit) package.
Q: Is the LT1460MHS8-2.5#PBF RoHS compliant? A: Yes, the LT1460MHS8-2.5#PBF is RoHS (Restriction of Hazardous Substances) compliant, meaning it does not contain any restricted substances according to the RoHS directive.
Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.