Linear Technology/QD Devices
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
LTC4307CDD-1#TRPBF
Lihat Butiran Helaian data

LTC4307CDD-1#TRPBF

Product Overview

Category

The LTC4307CDD-1#TRPBF belongs to the category of electronic components.

Use

It is commonly used in electronic circuits for bus buffering and level shifting applications.

Characteristics

  • Bus Buffering: The LTC4307CDD-1#TRPBF acts as a buffer between two buses, allowing them to operate at different voltage levels.
  • Level Shifting: It provides bidirectional voltage translation between two buses with different logic levels.
  • I2C Compatible: The device is compatible with I2C and SMBus protocols.
  • Low Voltage Operation: It can operate at low voltages, making it suitable for low-power applications.
  • High-Speed Operation: The LTC4307CDD-1#TRPBF supports high-speed data rates, enabling efficient communication between buses.

Package

The LTC4307CDD-1#TRPBF is available in a DFN (Dual Flat No-Lead) package.

Essence

The essence of LTC4307CDD-1#TRPBF lies in its ability to facilitate communication between buses operating at different voltage levels.

Packaging/Quantity

The product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Supply Voltage Range: 1.65V to 5.5V
  • Operating Temperature Range: -40°C to 85°C
  • Maximum Data Rate: 400kHz
  • Quiescent Current: 1.5μA (typical)
  • Number of Pins: 8

Detailed Pin Configuration

  1. SDA1: Input/Output for Bus 1
  2. SCL1: Input for Clock Signal of Bus 1
  3. GND: Ground
  4. SDA2: Input/Output for Bus 2
  5. SCL2: Input for Clock Signal of Bus 2
  6. EN: Enable Pin
  7. VCC: Supply Voltage
  8. ADDR: Address Selection Pin

Functional Features

  • Bidirectional Voltage Translation: Allows communication between buses with different voltage levels.
  • Automatic Direction Control: Determines the direction of data flow based on the logic levels of the buses.
  • Stuck Bus Recovery: Detects and recovers from stuck bus conditions, ensuring reliable operation.
  • Rise Time Accelerators: Minimize bus capacitance effects, enabling high-speed operation.
  • Noise Filtering: Provides noise rejection to enhance signal integrity during data transmission.

Advantages and Disadvantages

Advantages

  • Enables communication between buses operating at different voltage levels.
  • Supports high-speed data rates.
  • Low quiescent current consumption.
  • Automatic direction control simplifies system design.
  • Stuck bus recovery enhances reliability.

Disadvantages

  • Limited to I2C and SMBus protocols.
  • Not suitable for applications requiring voltage translation beyond its specified range.

Working Principles

The LTC4307CDD-1#TRPBF operates by monitoring the logic levels of the input buses (SDA1 and SDA2) and controlling the bidirectional voltage translation between them. It automatically determines the direction of data flow based on the logic levels present on the buses. The device also incorporates rise time accelerators to minimize the impact of bus capacitance, allowing for high-speed operation. In case of a stuck bus condition, the LTC4307CDD-1#TRPBF detects the fault and takes appropriate measures to recover normal operation.

Detailed Application Field Plans

The LTC4307CDD-1#TRPBF finds application in various fields, including:

  1. Industrial Automation: Facilitating communication between different subsystems operating at different voltage levels.
  2. Consumer Electronics: Enabling level shifting between I2C devices with varying voltage requirements.
  3. Automotive Electronics: Supporting voltage translation in automotive bus systems.
  4. IoT Devices: Allowing connectivity between sensors and microcontrollers operating at different logic levels.

Detailed and Complete Alternative Models

  1. LTC4316: Similar functionality with additional features like hot-swappable capability.
  2. PCA9306: Provides bidirectional voltage translation for I2C buses.
  3. TXB0108: Eight-channel bidirectional voltage-level translator for various protocols.

(Note: The above list is not exhaustive and serves as a reference for alternative models.)

Word count: 550 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi LTC4307CDD-1#TRPBF dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of LTC4307CDD-1#TRPBF:

Q1: What is LTC4307CDD-1#TRPBF? A1: LTC4307CDD-1#TRPBF is a multiplexer/demultiplexer IC (integrated circuit) designed for I2C bus applications.

Q2: What is the purpose of LTC4307CDD-1#TRPBF? A2: The purpose of LTC4307CDD-1#TRPBF is to provide level shifting, buffering, and bus isolation functions in I2C communication systems.

Q3: What voltage levels does LTC4307CDD-1#TRPBF support? A3: LTC4307CDD-1#TRPBF supports voltage levels from 1.8V to 5.5V.

Q4: Can LTC4307CDD-1#TRPBF be used as a bidirectional level shifter? A4: Yes, LTC4307CDD-1#TRPBF can be used as a bidirectional level shifter for I2C signals.

Q5: How many channels does LTC4307CDD-1#TRPBF have? A5: LTC4307CDD-1#TRPBF has two bidirectional channels.

Q6: What is the maximum data rate supported by LTC4307CDD-1#TRPBF? A6: LTC4307CDD-1#TRPBF supports a maximum data rate of 400kHz.

Q7: Does LTC4307CDD-1#TRPBF have built-in bus arbitration? A7: Yes, LTC4307CDD-1#TRPBF has built-in bus arbitration to prevent bus contention.

Q8: Can LTC4307CDD-1#TRPBF be used in hot-swapping applications? A8: Yes, LTC4307CDD-1#TRPBF is suitable for hot-swapping applications as it provides glitch-free bus switching.

Q9: What is the operating temperature range of LTC4307CDD-1#TRPBF? A9: LTC4307CDD-1#TRPBF can operate within a temperature range of -40°C to 85°C.

Q10: Is LTC4307CDD-1#TRPBF available in a surface-mount package? A10: Yes, LTC4307CDD-1#TRPBF is available in a 10-lead DFN (Dual Flat No-Lead) package.

Please note that these answers are general and may vary depending on the specific application and requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.