Lihat spesifikasi untuk butiran produk.
LTC4362IDCB-2
Product Category
The LTC4362IDCB-2 belongs to the category of power management integrated circuits (ICs).
Basic Information Overview
- Use: The LTC4362IDCB-2 is used for overvoltage and overcurrent protection in various electronic systems.
- Characteristics: It features low quiescent current, wide input voltage range, and adjustable overvoltage and overcurrent thresholds.
- Package: The LTC4362IDCB-2 is available in a 6-lead DFN package.
- Essence: Its essence lies in providing robust protection for sensitive electronic components.
- Packaging/Quantity: The LTC4362IDCB-2 is typically packaged in reels with a quantity of 2500 units per reel.
Specifications
- Input Voltage Range: 4V to 80V
- Overvoltage Threshold: Adjustable from 4.3V to 76V
- Overcurrent Threshold: Adjustable from 10mV to 100mV
- Quiescent Current: 1.5µA
- Operating Temperature Range: -40°C to 125°C
Detailed Pin Configuration
The LTC4362IDCB-2 has the following pin configuration: 1. VIN: Input Voltage 2. GATE: Gate Drive Output 3. GND: Ground 4. OV: Overvoltage Threshold 5. OC: Overcurrent Threshold 6. FLT: Fault Indicator
Functional Features
- Overvoltage and overcurrent protection
- Adjustable threshold levels
- Low quiescent current
- Wide input voltage range
Advantages and Disadvantages
Advantages: - Robust protection for sensitive electronics - Wide input voltage range - Adjustable threshold levels
Disadvantages: - Limited to 80V maximum input voltage - Requires external components for full functionality
Working Principles
The LTC4362IDCB-2 operates by monitoring the input voltage and current. When these parameters exceed the set thresholds, the device quickly turns off the external MOSFET to protect downstream components.
Detailed Application Field Plans
The LTC4362IDCB-2 is commonly used in automotive electronics, industrial control systems, and battery management applications where overvoltage and overcurrent protection are critical.
Detailed and Complete Alternative Models
Some alternative models to the LTC4362IDCB-2 include the LTC4362-1 and LTC4362-2, which offer similar functionality with slight variations in specifications and package options.
Word count: 319
Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi LTC4362IDCB-2 dalam penyelesaian teknikal
What is the LTC4362IDCB-2?
- The LTC4362IDCB-2 is a dual high voltage surge stopper designed to protect sensitive electronic equipment from overvoltage transients.
What is the input voltage range of LTC4362IDCB-2?
- The input voltage range of LTC4362IDCB-2 is 4V to 80V.
What is the maximum continuous output current of LTC4362IDCB-2?
- The maximum continuous output current of LTC4362IDCB-2 is 4A.
How does LTC4362IDCB-2 protect against overvoltage transients?
- LTC4362IDCB-2 uses an adjustable threshold overvoltage protection circuit to limit the voltage seen by the load.
Can LTC4362IDCB-2 be used in automotive applications?
- Yes, LTC4362IDCB-2 is suitable for use in automotive and industrial applications.
What is the typical quiescent current of LTC4362IDCB-2?
- The typical quiescent current of LTC4362IDCB-2 is 40µA.
Does LTC4362IDCB-2 have built-in thermal shutdown protection?
- Yes, LTC4362IDCB-2 includes built-in thermal shutdown protection to prevent damage due to excessive temperature.
What are the key features of LTC4362IDCB-2?
- Key features of LTC4362IDCB-2 include overvoltage and reverse voltage protection, adjustable UVLO, and thermal shutdown.
Is LTC4362IDCB-2 suitable for battery protection applications?
- Yes, LTC4362IDCB-2 can be used for battery protection in applications where overvoltage conditions may occur.
Can LTC4362IDCB-2 be used in parallel for higher current applications?
- Yes, LTC4362IDCB-2 can be used in parallel to increase the current handling capability for higher power applications.