Linear Technology/Analog Devices
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
LTC4416EMS#PBF
Lihat Butiran Helaian data

LTC4416EMS#PBF

Product Overview

Category: Integrated Circuits (ICs)

Use: Power Management

Characteristics: - Ideal Diode Controller - Low Voltage Drop - Reverse Input Protection - Overvoltage Protection - Undervoltage Lockout - Fault Indicator Output

Package: MSOP-10

Essence: The LTC4416EMS#PBF is an ideal diode controller designed for power management applications. It provides low voltage drop and protects against reverse input and overvoltage conditions. The device also features undervoltage lockout and a fault indicator output.

Packaging/Quantity: The LTC4416EMS#PBF is available in an MSOP-10 package. It is typically sold in reels of 2500 units.

Specifications

  • Input Voltage Range: 2.5V to 36V
  • Operating Temperature Range: -40°C to 85°C
  • Quiescent Current: 20µA
  • Fault Indicator Output Voltage: 5V
  • Reverse Input Protection Voltage: -40V
  • Overvoltage Protection Threshold: 36.5V
  • Undervoltage Lockout Threshold: 2.3V

Pin Configuration

The LTC4416EMS#PBF has the following pin configuration:

  1. GATE: Gate Drive Output
  2. VIN: Input Voltage
  3. VOUT: Output Voltage
  4. FLT: Fault Indicator Output
  5. EN: Enable Input
  6. GND: Ground
  7. NC: No Connection
  8. NC: No Connection
  9. NC: No Connection
  10. NC: No Connection

Functional Features

  • Ideal Diode Operation: The LTC4416EMS#PBF enables seamless switching between power sources by acting as an ideal diode, minimizing voltage drops and ensuring uninterrupted power supply.
  • Reverse Input Protection: The device protects against reverse polarity connection, preventing damage to the circuitry.
  • Overvoltage Protection: It safeguards the load from excessive voltage levels by disconnecting the input when the voltage exceeds the specified threshold.
  • Undervoltage Lockout: The LTC4416EMS#PBF ensures that the load is disconnected when the input voltage falls below a certain threshold, preventing unreliable operation.
  • Fault Indicator Output: The fault indicator pin provides a signal indicating any fault condition, allowing for easy monitoring and troubleshooting.

Advantages

  • Low Voltage Drop: The LTC4416EMS#PBF minimizes voltage drops across the diode, resulting in efficient power transfer.
  • Reverse Input Protection: Protects the circuit from potential damage caused by reverse polarity connection.
  • Overvoltage and Undervoltage Protection: Ensures the load is protected from voltage spikes and unreliable operation due to low input voltage.
  • Fault Indicator Output: Simplifies fault detection and troubleshooting.

Disadvantages

  • Limited Input Voltage Range: The LTC4416EMS#PBF has an input voltage range of 2.5V to 36V, which may not be suitable for applications requiring higher voltages.
  • Package Size: The MSOP-10 package may limit its use in space-constrained designs.

Working Principles

The LTC4416EMS#PBF operates as an ideal diode controller by utilizing MOSFETs to emulate the behavior of a diode. It monitors the input voltage and controls the gate drive output to ensure seamless switching between power sources. The device also incorporates protection features such as reverse input protection, overvoltage protection, and undervoltage lockout to safeguard the load and prevent damage.

Application Field Plans

The LTC4416EMS#PBF finds applications in various fields, including:

  1. Battery-Powered Systems: Enables efficient power management and protection in portable devices, ensuring uninterrupted operation.
  2. Automotive Electronics: Protects sensitive electronic components from reverse polarity connection and voltage fluctuations.
  3. Industrial Control Systems: Provides reliable power switching and protection in control systems, preventing damage to critical equipment.
  4. Telecom Infrastructure: Ensures continuous power supply and protects against voltage surges in telecom infrastructure equipment.

Alternative Models

  1. LTC4417EMS#PBF: Similar to LTC4416EMS#PBF with additional features such as adjustable undervoltage lockout threshold.
  2. LTC4418EMS#PBF: Ideal diode controller with higher input voltage range (up to 60V) and adjustable overvoltage protection threshold.

These alternative models offer similar functionality to the LTC4416EMS#PBF but may have different specifications and package options.

Word count: 529 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi LTC4416EMS#PBF dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of LTC4416EMS#PBF in technical solutions:

  1. Q: What is LTC4416EMS#PBF? A: LTC4416EMS#PBF is a power management IC (Integrated Circuit) designed for power path control and protection in various applications.

  2. Q: What are the main features of LTC4416EMS#PBF? A: The main features include reverse input protection, ideal diode functionality, undervoltage lockout, adjustable current limit, and thermal shutdown.

  3. Q: How does LTC4416EMS#PBF provide reverse input protection? A: LTC4416EMS#PBF utilizes an integrated MOSFET to prevent reverse current flow, protecting the system from damage.

  4. Q: Can LTC4416EMS#PBF be used as an ideal diode? A: Yes, LTC4416EMS#PBF can function as an ideal diode, allowing power to flow from the higher voltage source while blocking reverse current.

  5. Q: What is undervoltage lockout (UVLO) in LTC4416EMS#PBF? A: UVLO is a feature that ensures the input voltage is above a certain threshold before enabling the power path.

  6. Q: Can I adjust the current limit in LTC4416EMS#PBF? A: Yes, LTC4416EMS#PBF allows you to set the current limit using an external resistor, providing flexibility in different applications.

  7. Q: What happens if the temperature exceeds the safe operating range? A: LTC4416EMS#PBF has built-in thermal shutdown protection, which disables the power path when the temperature exceeds the specified limit.

  8. Q: What are the typical applications of LTC4416EMS#PBF? A: LTC4416EMS#PBF is commonly used in battery-powered systems, uninterruptible power supplies (UPS), portable devices, and automotive applications.

  9. Q: Can I use LTC4416EMS#PBF with different input voltage sources? A: Yes, LTC4416EMS#PBF supports a wide range of input voltages, making it suitable for various power supply configurations.

  10. Q: Is LTC4416EMS#PBF available in other package options? A: Yes, LTC4416EMS#PBF is available in an MSOP-10 package, but it may also be offered in other package options by the manufacturer.

Please note that these answers are general and may vary depending on the specific application and requirements. It's always recommended to refer to the datasheet and consult the manufacturer for detailed information.