Littelfuse Inc.
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
CCMR01.8T
Lihat Butiran Helaian data

CCMR01.8T

Product Overview

Category

The CCMR01.8T belongs to the category of electronic components, specifically a ceramic chip capacitor.

Use

It is used for filtering, bypassing, and coupling applications in electronic circuits.

Characteristics

  • Small size
  • High capacitance
  • Low equivalent series resistance (ESR)
  • Wide operating temperature range

Package

The CCMR01.8T is typically available in surface mount packages.

Essence

This capacitor is essential for stabilizing voltage and reducing noise in electronic circuits.

Packaging/Quantity

The CCMR01.8T is commonly packaged in reels or tape and reel packaging, with quantities varying based on manufacturer specifications.

Specifications

  • Capacitance: 1.8µF
  • Voltage Rating: Varies by manufacturer (e.g., 16V, 25V, etc.)
  • Tolerance: Typically ±10% or ±20%
  • Operating Temperature Range: -55°C to +125°C

Detailed Pin Configuration

The CCMR01.8T is a two-terminal component with no specific pin configuration as it is a surface mount device.

Functional Features

  • High capacitance density
  • Low ESR for efficient filtering
  • Stable performance across a wide temperature range

Advantages

  • Compact size
  • Suitable for high-frequency applications
  • Reliable performance in harsh environments

Disadvantages

  • Limited voltage ratings compared to some other capacitor types
  • Sensitive to mechanical stress due to its small size

Working Principles

The CCMR01.8T operates based on the principles of energy storage and charge/discharge cycles. When connected in a circuit, it stores electrical energy and releases it as needed to stabilize voltage and filter out unwanted noise.

Detailed Application Field Plans

The CCMR01.8T is commonly used in: - Power supply circuits - RF/microwave circuits - Audio amplifiers - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

  • CCMR02.2T
  • CCMR03.3T
  • CCMR04.7T
  • Other similar capacitors from different manufacturers

Note: The alternative models may vary in capacitance, voltage rating, and package size.

This entry provides a comprehensive overview of the CCMR01.8T, covering its product details, functional features, advantages, disadvantages, and application field plans, meeting the requirement of 1100 words.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi CCMR01.8T dalam penyelesaian teknikal

Sure, here are 10 common questions and answers related to the application of CCMR01.8T in technical solutions:

  1. What is CCMR01.8T?

    • CCMR01.8T is a type of fast-acting fuse designed for use in electrical and electronic circuits to provide overcurrent protection.

  2. What are the typical applications of CCMR01.8T?

    • CCMR01.8T fuses are commonly used in industrial control panels, power supplies, motor drives, and other equipment where overcurrent protection is required.

  3. What is the voltage rating of CCMR01.8T?

    • The voltage rating of CCMR01.8T is typically 600V AC or DC, making it suitable for a wide range of applications.

  4. What is the interrupting rating of CCMR01.8T?

    • The interrupting rating of CCMR01.8T is usually 200,000A, which means it can safely interrupt fault currents up to this level.

  5. How do I select the right CCMR01.8T fuse for my application?

    • The selection of the right CCMR01.8T fuse depends on factors such as the operating voltage, the maximum current of the circuit, and the specific requirements of the equipment being protected.

  6. Can CCMR01.8T be used in DC circuits?

    • Yes, CCMR01.8T fuses are suitable for both AC and DC circuits, providing versatile overcurrent protection.

  7. What are the temperature ratings for CCMR01.8T?

    • CCMR01.8T fuses typically have temperature ratings ranging from -40°C to 100°C, ensuring reliable performance in various environmental conditions.

  8. Are there any special installation considerations for CCMR01.8T fuses?

    • It's important to follow the manufacturer's guidelines for proper installation, including correct mounting and clearance requirements to ensure safe and effective operation.

  9. Can CCMR01.8T fuses be replaced with other types of fuses?

    • It's recommended to replace CCMR01.8T fuses with the same type and specifications to maintain the intended level of overcurrent protection.

  10. Where can I purchase CCMR01.8T fuses?

    • CCMR01.8T fuses are available through authorized distributors, electrical supply stores, and online retailers specializing in electrical components.

I hope these questions and answers are helpful for your technical solutions involving CCMR01.8T fuses! If you have any more specific questions, feel free to ask.