Meixin Integrated
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
DS1267E-100+
Lihat Butiran Helaian data

DS1267E-100+ - English Editing Encyclopedia Entry

Product Overview

Category: Electronic Component
Use: Digital Potentiometer
Characteristics: High precision, compact size
Package: 8-pin SOIC
Essence: Adjustable resistance
Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Resistance Range: 0Ω to 100kΩ
  • Resolution: 256 steps
  • Supply Voltage: 2.7V to 5.5V
  • Temperature Range: -40°C to +85°C
  • End-to-End Resistance Tolerance: ±20%
  • Non-Volatile Memory: Yes
  • Interface: SPI (Serial Peripheral Interface)

Detailed Pin Configuration

  1. VDD: Power supply voltage
  2. SCLK: Serial clock input for SPI communication
  3. SDI: Serial data input for SPI communication
  4. CS: Chip select input for SPI communication
  5. SDO: Serial data output for SPI communication
  6. GND: Ground
  7. HIZ: High impedance terminal
  8. RH: Terminal connected to the wiper of the potentiometer

Functional Features

  • Digital control of resistance value
  • Non-volatile memory for storing settings
  • High resolution for precise adjustment
  • Wide operating temperature range
  • Low power consumption
  • Compact size for space-constrained applications

Advantages

  • Easy integration into digital circuits
  • Eliminates the need for mechanical potentiometers
  • Precise and repeatable resistance adjustment
  • Saves board space due to small form factor
  • Suitable for a wide range of applications

Disadvantages

  • Limited resistance range compared to some other models
  • Higher cost compared to traditional potentiometers
  • Requires knowledge of SPI interface for control

Working Principles

The DS1267E-100+ is a digital potentiometer that utilizes a series of resistive elements to achieve adjustable resistance. It employs the SPI interface to communicate with a microcontroller or other digital devices. The resistance value is controlled by sending digital commands through the SPI bus, allowing for precise and repeatable adjustment.

Detailed Application Field Plans

The DS1267E-100+ can be used in various applications where precise resistance adjustment is required. Some potential application fields include:

  1. Audio Equipment: Volume control, tone adjustment
  2. Industrial Control Systems: Calibration, feedback control
  3. Test and Measurement Instruments: Signal conditioning, calibration
  4. Communication Systems: Gain control, impedance matching
  5. Automotive Electronics: Sensor calibration, motor control

Detailed and Complete Alternative Models

  1. DS1804Z-100+: 100kΩ digital potentiometer with 256 steps, I2C interface
  2. MCP4131-103E/P: 10kΩ digital potentiometer with 257 steps, SPI interface
  3. MAX5486EUD+: 100kΩ digital potentiometer with 256 steps, I2C interface
  4. AD8403ARUZ50: 50kΩ digital potentiometer with 256 steps, SPI interface
  5. X9C104P: 100kΩ digital potentiometer with 100 steps, non-volatile memory

Note: This list is not exhaustive and there are many other alternative models available in the market.

In conclusion, the DS1267E-100+ is a high precision digital potentiometer belonging to the electronic component category. It offers adjustable resistance with a wide range of applications. With its compact size and non-volatile memory, it provides precise and repeatable resistance adjustment in various electronic systems.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi DS1267E-100+ dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of DS1267E-100+ in technical solutions:

  1. Question: What is DS1267E-100+?
    Answer: DS1267E-100+ is a digital potentiometer IC (Integrated Circuit) manufactured by Maxim Integrated. It is designed to provide variable resistance in electronic circuits.

  2. Question: What is the maximum resistance range of DS1267E-100+?
    Answer: The DS1267E-100+ has a maximum resistance range of 100 kilohms.

  3. Question: How can DS1267E-100+ be controlled?
    Answer: DS1267E-100+ can be controlled using a microcontroller or any other digital interface capable of sending SPI (Serial Peripheral Interface) commands.

  4. Question: What are some typical applications of DS1267E-100+?
    Answer: DS1267E-100+ can be used in various applications such as audio volume control, motor speed control, sensor calibration, and programmable power supplies.

  5. Question: Can DS1267E-100+ be used in both analog and digital circuits?
    Answer: Yes, DS1267E-100+ can be used in both analog and digital circuits as it provides a digitally controlled variable resistance.

  6. Question: What is the resolution of DS1267E-100+?
    Answer: DS1267E-100+ has a resolution of 256 steps, allowing for precise adjustment of resistance.

  7. Question: Does DS1267E-100+ require external power supply?
    Answer: Yes, DS1267E-100+ requires an external power supply typically ranging from 2.7V to 5.5V.

  8. Question: Can multiple DS1267E-100+ be cascaded together?
    Answer: Yes, multiple DS1267E-100+ ICs can be cascaded together to achieve higher resolution or control multiple channels simultaneously.

  9. Question: Is DS1267E-100+ suitable for high-speed applications?
    Answer: No, DS1267E-100+ is not designed for high-speed applications as it operates at a maximum clock frequency of 10 MHz.

  10. Question: Are there any evaluation boards available for DS1267E-100+?
    Answer: Yes, Maxim Integrated provides evaluation boards for DS1267E-100+ that can help in testing and prototyping applications using this IC.

Please note that the answers provided here are general and may vary depending on specific requirements and use cases. It is always recommended to refer to the datasheet and application notes provided by the manufacturer for detailed information.