Meixin Integrated
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
DS1284QN+T&R
Lihat Butiran Helaian data

DS1284QN+T&R

Product Overview

  • Category: Integrated Circuit
  • Use: Real-Time Clock (RTC)
  • Characteristics: Low power consumption, high accuracy, small form factor
  • Package: QFN (Quad Flat No-Lead)
  • Essence: Provides accurate timekeeping and calendar functions
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage: 2.7V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Timekeeping Accuracy: ±2 minutes per month at 25°C
  • Battery Backup Voltage: 2.0V to 5.5V
  • I/O Compatibility: 3.3V or 5V CMOS levels

Detailed Pin Configuration

The DS1284QN+T&R has a total of 16 pins arranged as follows:

  1. VCC - Power supply input
  2. GND - Ground
  3. X1 - Crystal oscillator input
  4. X2 - Crystal oscillator output
  5. SQW/INT - Square wave output or interrupt output
  6. SDA - Serial data input/output
  7. SCL - Serial clock input
  8. RST - Reset input
  9. VBAT - Battery backup input
  10. NC - No connection
  11. NC - No connection
  12. NC - No connection
  13. NC - No connection
  14. NC - No connection
  15. NC - No connection
  16. NC - No connection

Functional Features

  • Real-time clock with calendar functionality
  • Automatic leap year compensation
  • Programmable square wave output frequency
  • Alarm function with interrupt capability
  • Battery backup for timekeeping during power loss
  • Serial interface for easy integration with microcontrollers

Advantages and Disadvantages

Advantages: - Low power consumption extends battery life - High accuracy ensures precise timekeeping - Small form factor saves board space - Easy integration with microcontrollers

Disadvantages: - Limited functionality compared to more advanced RTCs - No built-in temperature compensation

Working Principles

The DS1284QN+T&R is based on a quartz crystal oscillator that provides accurate timing signals. It uses an internal counter to keep track of time and date information. The device can be powered by a battery backup during power loss, ensuring continuous timekeeping. Communication with the DS1284QN+T&R is achieved through a serial interface, allowing easy integration with microcontrollers.

Detailed Application Field Plans

The DS1284QN+T&R is commonly used in various applications, including:

  1. Embedded systems
  2. Consumer electronics
  3. Industrial automation
  4. Medical devices
  5. Automotive systems

In embedded systems, it is utilized for time-stamping, scheduling, and event logging. In consumer electronics, it enables accurate time display and alarm functions. Industrial automation relies on the DS1284QN+T&R for precise timing in control systems. Medical devices utilize it for time-sensitive operations and data logging. Automotive systems use it for clock synchronization and event tracking.

Detailed and Complete Alternative Models

  1. DS3231 - Highly accurate RTC with temperature compensation
  2. PCF8563 - Low-power RTC with I2C interface
  3. MCP7940N - Battery-backed RTC with SRAM and EEPROM
  4. DS1307 - Basic RTC with I2C interface
  5. RV-8803-C7 - Ultra-low power RTC with SPI interface

These alternative models offer different features and capabilities, catering to specific application requirements.

Word count: 314 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi DS1284QN+T&R dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of DS1284QN+T&R in technical solutions:

  1. Q: What is DS1284QN+T&R? A: DS1284QN+T&R is a specific model of a real-time clock (RTC) integrated circuit manufactured by Maxim Integrated. It provides accurate timekeeping and calendar functions.

  2. Q: What are the key features of DS1284QN+T&R? A: Some key features of DS1284QN+T&R include battery backup, programmable alarms, power management, non-volatile memory, and I2C interface compatibility.

  3. Q: How can DS1284QN+T&R be used in technical solutions? A: DS1284QN+T&R can be used in various technical solutions that require precise timekeeping, such as industrial automation systems, data loggers, medical devices, and embedded systems.

  4. Q: Does DS1284QN+T&R require an external power source? A: Yes, DS1284QN+T&R requires an external power source for normal operation. It can be powered by a battery or a regulated power supply.

  5. Q: Can DS1284QN+T&R operate without a battery backup? A: No, DS1284QN+T&R requires a battery backup to retain time and date information during power outages or when the main power source is disconnected.

  6. Q: Is DS1284QN+T&R compatible with microcontrollers? A: Yes, DS1284QN+T&R is compatible with microcontrollers and can be easily interfaced using the I2C communication protocol.

  7. Q: Can DS1284QN+T&R generate periodic alarms? A: Yes, DS1284QN+T&R has built-in alarm functionality that can be programmed to generate periodic alarms at specific times or dates.

  8. Q: What is the accuracy of DS1284QN+T&R? A: DS1284QN+T&R has a typical accuracy of ±2 minutes per month, but this can vary depending on factors such as temperature and power supply voltage.

  9. Q: Can DS1284QN+T&R be used in low-power applications? A: Yes, DS1284QN+T&R has power management features that allow it to operate in low-power modes, conserving energy in battery-powered applications.

  10. Q: Are there any application notes or technical documentation available for DS1284QN+T&R? A: Yes, Maxim Integrated provides detailed datasheets, application notes, and technical documentation on their website, which can help in understanding and implementing DS1284QN+T&R in various technical solutions.

Please note that the answers provided here are general and may vary based on specific requirements and use cases. It's always recommended to refer to the official documentation and consult with technical experts for accurate information.