Meixin Integrated
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
DS1821C+
Lihat Butiran Helaian data

DS1821C+ - Product Overview

Introduction

The DS1821C+ belongs to the category of temperature sensors and is widely used in various applications for monitoring and controlling temperature. This device is known for its accurate temperature sensing capabilities and versatile packaging options, making it suitable for a wide range of applications.

Basic Information Overview

  • Category: Temperature Sensor
  • Use: Monitoring and controlling temperature
  • Characteristics: Accurate temperature sensing, versatile packaging options
  • Package: TO-92, SOIC, and TDFN
  • Essence: Precise temperature measurement and control
  • Packaging/Quantity: Available in tape and reel packaging with varying quantities

Specifications

The DS1821C+ features the following specifications: - Temperature Range: -55°C to +125°C - Accuracy: ±2°C - Resolution: 9 to 12 bits - Supply Voltage: 3V to 5.5V - Interface: 1-Wire® bus interface

Detailed Pin Configuration

The DS1821C+ has a standard pin configuration with pins for power supply, ground, data input/output, and additional control pins. The detailed pin configuration is as follows: - Pin 1: VDD (Power Supply) - Pin 2: GND (Ground) - Pin 3: DQ (Data Input/Output) - Pin 4: RST (Reset)

Functional Features

The functional features of DS1821C+ include: - Digital temperature sensing - Nonvolatile temperature alarm settings - 1-Wire interface for communication - Programmable temperature resolution

Advantages and Disadvantages

Advantages

  • Accurate temperature measurement
  • Versatile packaging options
  • Wide temperature range
  • Nonvolatile temperature alarm settings

Disadvantages

  • Limited temperature accuracy compared to some high-precision sensors
  • Requires careful calibration for critical applications

Working Principles

The DS1821C+ operates based on the principles of digital temperature sensing using an internal temperature sensor and provides temperature data through the 1-Wire interface. It utilizes nonvolatile memory to store user-defined temperature alarm settings and offers programmable resolution for flexibility in different applications.

Detailed Application Field Plans

The DS1821C+ finds extensive application in various fields, including: - HVAC systems - Industrial automation - Consumer electronics - Medical devices - Automotive industry

Detailed and Complete Alternative Models

Some alternative models to DS1821C+ include: - DS18B20 - LM35 - TMP36 - MCP9808

In conclusion, the DS1821C+ is a versatile temperature sensor with precise temperature measurement capabilities and flexible packaging options, making it suitable for diverse applications across different industries.

Word count: 366

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi DS1821C+ dalam penyelesaian teknikal

  1. What is the DS1821C+ temperature sensor used for?

    • The DS1821C+ is a digital thermometer and thermostat, commonly used for temperature monitoring and control in various technical solutions.

  2. What is the temperature range of the DS1821C+?

    • The DS1821C+ has a temperature range of -55°C to +125°C, making it suitable for a wide range of applications.

  3. How accurate is the DS1821C+ temperature sensor?

    • The DS1821C+ has an accuracy of ±2°C, providing reliable temperature measurements for most applications.

  4. Can the DS1821C+ be used for temperature control?

    • Yes, the DS1821C+ can be configured as a thermostat to control heating or cooling systems based on temperature readings.

  5. What interface does the DS1821C+ use for communication?

    • The DS1821C+ uses a 2-wire serial interface (I2C) for communication with microcontrollers or other devices.

  6. Is the DS1821C+ suitable for battery-powered applications?

    • Yes, the DS1821C+ has low power consumption, making it suitable for battery-powered applications.

  7. Can multiple DS1821C+ sensors be used in the same system?

    • Yes, multiple DS1821C+ sensors can be connected to the same I2C bus, allowing for multi-point temperature monitoring.

  8. Does the DS1821C+ have built-in temperature hysteresis?

    • Yes, the DS1821C+ features programmable temperature hysteresis to prevent rapid switching near the set temperature.

  9. What is the typical response time of the DS1821C+ sensor?

    • The DS1821C+ has a typical response time of 750ms, allowing for relatively quick temperature measurements.

  10. Are there any special considerations for PCB layout when using the DS1821C+?

    • It's important to follow the manufacturer's guidelines for PCB layout to minimize noise and ensure accurate temperature readings with the DS1821C+.