Meixin Integrated
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
MAX503ENG+
Lihat Butiran Helaian data

MAX503ENG+ - English Editing Encyclopedia Entry

Product Overview

Category: Integrated Circuits (ICs)

Use: The MAX503ENG+ is a voltage regulator IC that provides a stable output voltage for various electronic devices. It is commonly used in power supply circuits to regulate and control the voltage levels.

Characteristics: - High efficiency - Low dropout voltage - Wide input voltage range - Overcurrent and thermal protection - Adjustable output voltage

Package: The MAX503ENG+ is available in a compact and industry-standard 8-pin SOIC package, which ensures easy integration into circuit designs.

Essence: This voltage regulator IC is designed to deliver a reliable and stable output voltage, making it suitable for a wide range of applications requiring precise voltage regulation.

Packaging/Quantity: The MAX503ENG+ is typically sold in reels or tubes containing multiple units, with each reel/tube containing a specific quantity of ICs.

Specifications

  • Input Voltage Range: 4.5V to 28V
  • Output Voltage Range: 1.25V to 26V
  • Maximum Output Current: 500mA
  • Dropout Voltage: 300mV at 500mA
  • Quiescent Current: 75µA
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

The MAX503ENG+ features the following pin configuration:

  1. GND (Ground)
  2. IN (Input Voltage)
  3. EN (Enable)
  4. FB (Feedback)
  5. VOUT (Output Voltage)
  6. NC (No Connection)
  7. NC (No Connection)
  8. VCC (Supply Voltage)

Functional Features

  • High Efficiency: The MAX503ENG+ exhibits high efficiency, minimizing power dissipation and maximizing battery life in portable devices.
  • Low Dropout Voltage: With a low dropout voltage of 300mV at 500mA, this IC ensures stable output voltage even when the input voltage is close to the desired output voltage.
  • Wide Input Voltage Range: The IC can accept a wide range of input voltages, making it suitable for various applications.
  • Overcurrent and Thermal Protection: The MAX503ENG+ incorporates built-in protection mechanisms to safeguard against overcurrent and excessive heat, ensuring reliable operation.
  • Adjustable Output Voltage: The output voltage can be easily adjusted using external resistors, providing flexibility in different applications.

Advantages and Disadvantages

Advantages: - High efficiency leads to reduced power consumption. - Wide input voltage range allows for versatile use. - Overcurrent and thermal protection enhance reliability. - Adjustable output voltage provides flexibility.

Disadvantages: - Limited maximum output current (500mA). - Dropout voltage may affect performance in low voltage applications.

Working Principles

The MAX503ENG+ operates as a linear voltage regulator. It regulates the output voltage by comparing the feedback voltage (FB pin) with a reference voltage. By adjusting the resistance connected to the FB pin, the output voltage can be set to the desired level. The internal circuitry of the IC ensures stable output voltage despite variations in input voltage and load conditions.

Detailed Application Field Plans

The MAX503ENG+ finds applications in various electronic devices and systems, including but not limited to: 1. Battery-powered devices 2. Portable audio players 3. Wireless communication modules 4. Industrial control systems 5. Automotive electronics 6. Medical equipment

Detailed and Complete Alternative Models

  1. LM317T - Adjustable Voltage Regulator
  2. LT1084CP-12 - Low Dropout Regulator
  3. LM7805 - Fixed Voltage Regulator
  4. TPS7A4700 - Ultra-Low Noise LDO Regulator
  5. LT1763 - Low Dropout Linear Regulator

These alternative models offer similar functionality and can be used as substitutes for the MAX503ENG+ in various applications.

Word count: 520 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi MAX503ENG+ dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of MAX503ENG+ in technical solutions:

  1. Q: What is the MAX503ENG+? A: The MAX503ENG+ is a voltage regulator IC that provides a regulated output voltage for various electronic applications.

  2. Q: What is the input voltage range supported by the MAX503ENG+? A: The MAX503ENG+ supports an input voltage range of 4.5V to 28V.

  3. Q: What is the maximum output current that can be delivered by the MAX503ENG+? A: The MAX503ENG+ can deliver a maximum output current of 500mA.

  4. Q: Can the MAX503ENG+ operate in both step-up (boost) and step-down (buck) modes? A: No, the MAX503ENG+ is a step-down (buck) voltage regulator and can only provide a lower output voltage than the input voltage.

  5. Q: What is the typical efficiency of the MAX503ENG+? A: The typical efficiency of the MAX503ENG+ is around 90%.

  6. Q: Does the MAX503ENG+ have built-in thermal protection? A: Yes, the MAX503ENG+ has built-in thermal shutdown protection to prevent overheating.

  7. Q: Can the MAX503ENG+ be used in battery-powered applications? A: Yes, the low quiescent current and wide input voltage range make it suitable for battery-powered applications.

  8. Q: Is the MAX503ENG+ compatible with both analog and digital circuits? A: Yes, the MAX503ENG+ can be used with both analog and digital circuits that require a stable power supply.

  9. Q: Can the MAX503ENG+ handle voltage spikes or transients? A: Yes, the MAX503ENG+ has built-in input and output overvoltage protection to handle voltage spikes and transients.

  10. Q: What are some typical applications of the MAX503ENG+? A: The MAX503ENG+ is commonly used in portable devices, industrial equipment, automotive electronics, and other applications that require a regulated power supply.

Please note that these answers are general and may vary depending on specific use cases and requirements.