Meixin Integrated
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
MAX6126B50+T
Lihat Butiran Helaian data

MAX6126B50+T

Product Overview

Category

The MAX6126B50+T belongs to the category of voltage references.

Use

It is primarily used as a precision voltage reference in various electronic applications.

Characteristics

  • High accuracy and stability
  • Low temperature coefficient
  • Low output noise
  • Wide operating temperature range

Package

The MAX6126B50+T is available in a small SOT23 package, which is suitable for surface mount applications.

Essence

The essence of the MAX6126B50+T is its ability to provide a highly accurate and stable voltage reference, making it ideal for precision measurement and control systems.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Output Voltage: 5.0V
  • Initial Accuracy: ±0.02%
  • Temperature Coefficient: 3ppm/°C (typical)
  • Output Noise: 4µVp-p (0.1Hz to 10Hz)
  • Supply Voltage Range: 2.7V to 12.6V
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The MAX6126B50+T has three pins:

  1. VOUT: Output voltage pin.
  2. GND: Ground pin.
  3. VIN: Input voltage pin.

Functional Features

  • High precision voltage reference.
  • Low temperature coefficient ensures stability over a wide temperature range.
  • Low output noise allows for accurate measurements.
  • Wide supply voltage range enables flexibility in different applications.

Advantages

  • Excellent accuracy and stability.
  • Low temperature coefficient minimizes errors due to temperature variations.
  • Low output noise ensures precise measurements.
  • Small package size allows for space-saving designs.
  • Wide operating temperature range makes it suitable for various environments.

Disadvantages

  • Relatively high cost compared to other voltage references.
  • Limited output voltage options (only 5.0V).

Working Principles

The MAX6126B50+T utilizes a bandgap reference circuit to generate a stable and accurate voltage reference. It compensates for temperature variations by employing a proportional-to-absolute-temperature (PTAT) current source and a negative temperature coefficient (NTC) resistor. This ensures that the output voltage remains constant over a wide temperature range.

Detailed Application Field Plans

The MAX6126B50+T is commonly used in the following applications:

  1. Precision measurement instruments
  2. Data acquisition systems
  3. Industrial control systems
  4. Medical equipment
  5. Automotive electronics

Detailed and Complete Alternative Models

  1. LT6657: Precision voltage reference with similar specifications.
  2. REF5050: High-precision voltage reference with adjustable output voltage.
  3. LM4040: Low-cost voltage reference with good accuracy and stability.

These alternative models offer similar functionality and can be considered as substitutes for the MAX6126B50+T.

Word count: 439 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi MAX6126B50+T dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of MAX6126B50+T in technical solutions:

  1. Q: What is the MAX6126B50+T? A: The MAX6126B50+T is a precision voltage reference IC that provides a stable and accurate output voltage.

  2. Q: What is the typical output voltage of the MAX6126B50+T? A: The typical output voltage of the MAX6126B50+T is 5.0 volts.

  3. Q: What is the input voltage range for the MAX6126B50+T? A: The input voltage range for the MAX6126B50+T is typically between 4.5 volts and 12 volts.

  4. Q: What is the output voltage accuracy of the MAX6126B50+T? A: The output voltage accuracy of the MAX6126B50+T is typically ±0.02%.

  5. Q: Can the MAX6126B50+T operate in low-power applications? A: Yes, the MAX6126B50+T is designed for low-power applications and has a low quiescent current consumption.

  6. Q: Is the MAX6126B50+T suitable for temperature-sensitive applications? A: Yes, the MAX6126B50+T has a low temperature coefficient, making it suitable for temperature-sensitive applications.

  7. Q: Does the MAX6126B50+T require any external components for operation? A: No, the MAX6126B50+T is a standalone voltage reference and does not require any external components.

  8. Q: Can the MAX6126B50+T drive capacitive loads? A: Yes, the MAX6126B50+T is capable of driving capacitive loads up to 10µF without any additional components.

  9. Q: What is the operating temperature range of the MAX6126B50+T? A: The operating temperature range of the MAX6126B50+T is typically -40°C to +125°C.

  10. Q: Is the MAX6126B50+T available in different package options? A: Yes, the MAX6126B50+T is available in a SOT23-3 package, making it suitable for various PCB designs.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.