MAX707CPA+ - English Editing Encyclopedia Entry

Product Overview

Category

MAX707CPA+ belongs to the category of integrated circuits (ICs).

Use

The MAX707CPA+ is commonly used as a voltage detector and reset circuit in electronic devices.

Characteristics

• Voltage detection range: 1.6V to 5.5V
• Low quiescent current: 7µA
• Precision voltage threshold: ±2%
• Open-drain active-low RESET output
• Manual reset input
• Power-on reset delay time: 200ms
• Small package size: 8-pin PDIP

Package and Quantity

The MAX707CPA+ is available in an 8-pin plastic dual in-line package (PDIP). It is typically sold in quantities of one unit.

Specifications

• Supply Voltage Range: 1.6V to 5.5V
• Operating Temperature Range: -40°C to +85°C
• Quiescent Current: 7µA (typical)
• Reset Threshold Accuracy: ±2%
• Reset Timeout Period: 200ms (typical)
• Output Type: Open-drain active-low RESET

Pin Configuration

The MAX707CPA+ has the following pin configuration:

```

---

| | --| VCC GND |-- Pin 1: Ground (GND) --| MR RST |-- Pin 2: Manual Reset Input (MR) --| RST OUT |-- Pin 3: Reset Output (OUT) --| NC NC |-- Pin 4: Not Connected (NC) --| NC NC |-- Pin 5: Not Connected (NC) --| NC NC |-- Pin 6: Not Connected (NC) --| NC NC |-- Pin 7: Not Connected (NC) --| NC NC |-- Pin 8: Not Connected (NC) |___________| ```

Functional Features

• Voltage detection: The MAX707CPA+ can accurately detect the voltage level within the specified range.
• Reset circuit: It provides an active-low RESET output signal, which can be used to reset other components in the system.
• Manual reset input: The MR pin allows for manual resetting of the circuit.
• Power-on reset delay: The device ensures a stable reset signal during power-up by delaying the reset output for a specific period.

Advantages and Disadvantages

Advantages

• Wide voltage detection range
• Low quiescent current consumption
• Precision voltage threshold
• Small package size for space-constrained applications

Disadvantages

• Limited number of pins for additional functionality
• No adjustable reset timeout period

Working Principles

The MAX707CPA+ operates by continuously monitoring the input voltage. When the voltage falls below the preset threshold, the reset output is activated, indicating a low-voltage condition. The reset output remains active until the voltage rises above the threshold or a manual reset is triggered.

Application Field Plans

The MAX707CPA+ finds applications in various electronic devices where voltage monitoring and reset functionality are required. Some potential application fields include: - Microcontrollers and microprocessors - Embedded systems - Power management circuits - Battery-powered devices - Industrial control systems

Alternative Models

Here are some alternative models that offer similar functionality to the MAX707CPA+: - MAX706CPA+ - MAX708CPA+ - MAX809CPD+

These alternatives can be considered based on specific requirements and availability.

In conclusion, the MAX707CPA+ is a versatile integrated circuit used for voltage detection and reset functions in electronic devices. Its wide voltage range, low power consumption, and compact package make it suitable for various applications. However, its limited pin count and fixed reset timeout period should be taken into consideration when selecting the appropriate model for a specific application.

Word Count: 443