Meixin Integrated
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
MAX9710ETP+T
Lihat Butiran Helaian data

MAX9710ETP+T

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Audio Amplifier
  • Characteristics: High Efficiency, Low Noise, Small Package Size
  • Package: TQFN-20
  • Essence: Class D Audio Amplifier
  • Packaging/Quantity: Tape and Reel, 2500 pieces per reel

Specifications

  • Supply Voltage Range: 4.5V to 28V
  • Output Power: 2.8W per channel into 8Ω load at 5V supply
  • Total Harmonic Distortion + Noise (THD+N): 0.04% at 1kHz, 1W into 8Ω load
  • Efficiency: Up to 87%
  • Shutdown Current: <1µA
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

The MAX9710ETP+T has a total of 20 pins arranged as follows:

Pin 1: VDD Pin 2: GND Pin 3: SHDN Pin 4: IN- Pin 5: IN+ Pin 6: FB Pin 7: AGND Pin 8: PGND Pin 9: OUTB Pin 10: OUTA Pin 11: BST Pin 12: PVDD Pin 13: VDD Pin 14: GND Pin 15: SHDN Pin 16: IN- Pin 17: IN+ Pin 18: FB Pin 19: AGND Pin 20: PGND

Functional Features

  • Class D amplifier with high efficiency and low power consumption
  • Single-supply operation from 4.5V to 28V
  • Shutdown mode for power-saving when not in use
  • Short-circuit and thermal protection
  • Integrated feedback loop compensation
  • Low output noise and distortion

Advantages and Disadvantages

Advantages: - High efficiency results in less power dissipation and longer battery life - Small package size allows for space-saving designs - Low output noise ensures high-quality audio reproduction - Integrated protection features enhance reliability

Disadvantages: - Limited output power compared to larger amplifiers - Requires an external power supply

Working Principles

The MAX9710ETP+T is a Class D audio amplifier that utilizes pulse-width modulation (PWM) to convert the input audio signal into a high-frequency square wave. This square wave is then filtered and amplified to produce the final audio output. The Class D architecture enables high efficiency by minimizing power losses during amplification.

Detailed Application Field Plans

The MAX9710ETP+T is suitable for various audio applications, including:

  1. Portable Bluetooth speakers
  2. Headphone amplifiers
  3. Home theater systems
  4. Automotive audio systems
  5. Multimedia devices

Detailed and Complete Alternative Models

  1. TPA3116D2: Class D audio amplifier with similar specifications and features.
  2. TAS5630B: High-performance Class D amplifier with advanced protection features.
  3. LM3886: Class AB audio amplifier with higher output power capability.

These alternative models offer different trade-offs in terms of performance, power consumption, and cost, allowing designers to choose the most suitable option for their specific application.

In conclusion, the MAX9710ETP+T is a compact and efficient Class D audio amplifier suitable for various audio applications. Its high efficiency, low noise, and integrated protection features make it an excellent choice for portable and power-sensitive designs.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi MAX9710ETP+T dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of MAX9710ETP+T in technical solutions:

1. What is the MAX9710ETP+T? The MAX9710ETP+T is a high-efficiency, mono Class D audio amplifier with an integrated boost converter. It is commonly used for driving speakers in portable devices.

2. What is the input voltage range of the MAX9710ETP+T? The input voltage range of the MAX9710ETP+T is typically between 2.7V and 5.5V.

3. What is the output power capability of the MAX9710ETP+T? The MAX9710ETP+T can deliver up to 2.8W of continuous output power into a 4Ω load with a 5V supply.

4. Can the MAX9710ETP+T operate with a single-ended power supply? Yes, the MAX9710ETP+T can operate with a single-ended power supply, making it suitable for battery-powered applications.

5. Does the MAX9710ETP+T require external components for operation? Yes, the MAX9710ETP+T requires a few external components such as input capacitors, feedback resistors, and output filter components for proper operation.

6. Is the MAX9710ETP+T capable of driving low-impedance loads? Yes, the MAX9710ETP+T is designed to drive low-impedance loads down to 4Ω.

7. Can the MAX9710ETP+T be used in stereo applications? Yes, the MAX9710ETP+T can be used in stereo applications by using two amplifiers, one for each channel.

8. What is the efficiency of the MAX9710ETP+T? The efficiency of the MAX9710ETP+T can reach up to 87% under typical operating conditions.

9. Does the MAX9710ETP+T have built-in thermal protection? Yes, the MAX9710ETP+T has built-in thermal protection that prevents the device from overheating during operation.

10. Can the MAX9710ETP+T be used in automotive applications? Yes, the MAX9710ETP+T is suitable for automotive applications as it can operate over a wide temperature range and has built-in protection features.

Please note that these answers are general and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and application notes provided by the manufacturer for detailed information.