Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
24C02C-I/SN

24C02C-I/SN

Product Overview

Category

The 24C02C-I/SN belongs to the category of electrically erasable programmable read-only memory (EEPROM) integrated circuits.

Use

It is commonly used for non-volatile data storage in various electronic devices such as consumer electronics, automotive systems, and industrial applications.

Characteristics

  • Non-volatile memory
  • Low power consumption
  • Small form factor
  • I2C interface
  • High reliability

Package

The 24C02C-I/SN is typically available in a small outline integrated circuit (SOIC) package.

Essence

The essence of the 24C02C-I/SN lies in its ability to store and retrieve data reliably in a wide range of operating conditions.

Packaging/Quantity

It is usually supplied in tape and reel packaging with varying quantities depending on the manufacturer.

Specifications

  • Memory Size: 2 Kbits
  • Interface: I2C
  • Operating Voltage: 1.7V to 5.5V
  • Operating Temperature Range: -40°C to 85°C
  • Write Cycle Endurance: 1,000,000 cycles
  • Data Retention: 200 years

Detailed Pin Configuration

The 24C02C-I/SN typically has 8 pins: 1. A0: Chip address input 2. A1: Chip address input 3. A2: Chip address input 4. VSS: Ground 5. SDA: Serial data input/output 6. SCL: Serial clock input 7. WP: Write protect 8. VCC: Power supply

Functional Features

  • Byte and Page Write Modes
  • Random and Sequential Read Modes
  • Write Protect Pin for Hardware Data Protection
  • Acknowledge Polling and Software Write Protection

Advantages

  • Small footprint
  • Low power consumption
  • High reliability
  • Flexible addressing options
  • Compatibility with I2C interface

Disadvantages

  • Limited storage capacity
  • Slower write speeds compared to other memory technologies

Working Principles

The 24C02C-I/SN operates by using an I2C interface to communicate with the host system. It stores and retrieves data through byte and page write modes, allowing for efficient data management.

Detailed Application Field Plans

The 24C02C-I/SN is widely used in applications such as: - Smartphones and tablets for storing user settings and preferences - Automotive systems for storing calibration data and vehicle parameters - Industrial control systems for configuration and parameter storage

Detailed and Complete Alternative Models

Some alternative models to the 24C02C-I/SN include: - 24C01C - 24C04C - 24C08C - 24C16C

In conclusion, the 24C02C-I/SN is a versatile EEPROM IC that offers reliable non-volatile data storage in a compact form factor, making it suitable for a wide range of electronic applications.

Word Count: 439

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi 24C02C-I/SN dalam penyelesaian teknikal

  1. What is the maximum clock frequency for 24C02C-I/SN?
    - The maximum clock frequency for 24C02C-I/SN is 400 kHz.

  2. What is the operating voltage range for 24C02C-I/SN?
    - The operating voltage range for 24C02C-I/SN is 1.7V to 5.5V.

  3. Can 24C02C-I/SN be used in automotive applications?
    - Yes, 24C02C-I/SN is suitable for automotive applications.

  4. What is the typical write time for 24C02C-I/SN?
    - The typical write time for 24C02C-I/SN is 5 ms.

  5. Is 24C02C-I/SN compatible with I2C protocol?
    - Yes, 24C02C-I/SN is compatible with the I2C protocol.

  6. What is the maximum write cycle endurance for 24C02C-I/SN?
    - The maximum write cycle endurance for 24C02C-I/SN is 1 million cycles.

  7. Can 24C02C-I/SN operate at high temperatures?
    - Yes, 24C02C-I/SN can operate at extended temperature ranges.

  8. What is the typical standby current for 24C02C-I/SN?
    - The typical standby current for 24C02C-I/SN is 1 µA.

  9. Does 24C02C-I/SN have built-in write protection?
    - Yes, 24C02C-I/SN features built-in hardware write protection.

  10. Is 24C02C-I/SN RoHS compliant?
    - Yes, 24C02C-I/SN is RoHS compliant.