Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
AT24C01-10PC-2.7

AT24C01-10PC-2.7

Product Overview

Category

AT24C01-10PC-2.7 belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.

Use

This product is commonly used for storing and retrieving digital information in electronic devices.

Characteristics

  • Electrically erasable: The stored data can be erased and reprogrammed electronically.
  • Non-volatile: The data remains intact even when power is removed.
  • High storage capacity: The AT24C01-10PC-2.7 has a storage capacity of 1 kilobit (128 bytes).
  • Low power consumption: It operates at a low voltage and consumes minimal power.
  • I2C interface: The chip communicates using the I2C protocol.

Package

The AT24C01-10PC-2.7 comes in a standard 8-pin DIP (Dual Inline Package) package.

Essence

The essence of this product lies in its ability to provide non-volatile memory storage in a compact and efficient manner.

Packaging/Quantity

The AT24C01-10PC-2.7 is typically packaged in reels or tubes, with each reel containing 2,000 units.

Specifications

  • Memory Capacity: 1 kilobit (128 bytes)
  • Operating Voltage: 2.7V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Write Cycle Endurance: 1 million cycles
  • Data Retention: 100 years

Detailed Pin Configuration

The AT24C01-10PC-2.7 has the following pin configuration:

  1. A0: Chip Address Input
  2. A1: Chip Address Input
  3. A2: Chip Address Input
  4. GND: Ground
  5. SDA: Serial Data Input/Output
  6. SCL: Serial Clock Input
  7. WP: Write Protect
  8. VCC: Power Supply

Functional Features

  • Random access: Allows reading and writing of specific memory locations.
  • Byte-wise operations: Enables individual byte read and write operations.
  • Hardware write protection: The WP pin can be used to protect the memory from accidental writes.
  • Acknowledge support: Provides acknowledgment signals during data transfer.

Advantages and Disadvantages

Advantages

  • Non-volatile storage: Data remains intact even without power.
  • Compact size: The chip is small in size, making it suitable for space-constrained applications.
  • Low power consumption: Operates at a low voltage and consumes minimal power.
  • High endurance: Can withstand frequent write cycles.

Disadvantages

  • Limited storage capacity: The AT24C01-10PC-2.7 has a relatively small memory capacity.
  • Slower write speed: EEPROMs generally have slower write speeds compared to other memory technologies.

Working Principles

The AT24C01-10PC-2.7 uses electrically controlled floating gate transistors to store and retrieve digital information. When data is written, an electrical charge is applied to the floating gate, altering its conductivity. This change in conductivity represents the stored data. During read operations, the conductivity of the floating gate is measured to determine the stored information.

Detailed Application Field Plans

The AT24C01-10PC-2.7 finds application in various electronic devices, including but not limited to: - Consumer electronics - Automotive systems - Industrial control systems - Medical devices - Communication equipment

Detailed and Complete Alternative Models

Some alternative models to the AT24C01-10PC-2.7 include: - AT24C02: 2 kilobit (256 bytes) capacity - AT24C04: 4 kilobit (512 bytes) capacity - AT24C08: 8 kilobit (1 kilobyte) capacity - AT24C16: 16 kilobit (2 kilobytes) capacity

These alternative models offer increased storage capacities while maintaining similar functionality and characteristics.

In conclusion, the AT24C01-10PC-2.7 is an electrically erasable programmable read-only memory chip that provides non-volatile storage in a compact form factor. With its high endurance, low power consumption, and I2C interface, it finds application in various electronic devices across different industries. Alternative models with higher storage capacities are also available for more demanding applications.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi AT24C01-10PC-2.7 dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of AT24C01-10PC-2.7 in technical solutions:

  1. Q: What is the AT24C01-10PC-2.7? A: The AT24C01-10PC-2.7 is a 1K-bit (128 x 8) electrically erasable programmable read-only memory (EEPROM) chip.

  2. Q: What are the typical applications of AT24C01-10PC-2.7? A: It is commonly used for storing small amounts of non-volatile data in various electronic devices, such as microcontrollers, sensors, and communication modules.

  3. Q: How does the AT24C01-10PC-2.7 communicate with other devices? A: It uses the I2C (Inter-Integrated Circuit) protocol for communication, which allows multiple devices to be connected on the same bus.

  4. Q: What is the operating voltage range of AT24C01-10PC-2.7? A: It operates within a voltage range of 2.7V to 5.5V.

  5. Q: Can I write data to the AT24C01-10PC-2.7 more than once? A: Yes, it supports multiple write cycles, allowing you to update or modify the stored data.

  6. Q: How much data can the AT24C01-10PC-2.7 store? A: It has a capacity of 1 kilobit, which is equivalent to 128 bytes or 1024 bits.

  7. Q: Is the data stored in AT24C01-10PC-2.7 retained even when power is disconnected? A: Yes, the data is non-volatile, meaning it remains stored even when power is removed.

  8. Q: What is the maximum clock frequency supported by AT24C01-10PC-2.7? A: It can operate at a maximum clock frequency of 400 kHz.

  9. Q: Can I use multiple AT24C01-10PC-2.7 chips in the same circuit? A: Yes, you can connect multiple chips to the same I2C bus, using different device addresses for each chip.

  10. Q: Are there any limitations on the number of read or write operations with AT24C01-10PC-2.7? A: The AT24C01-10PC-2.7 has a specified endurance of 1 million write cycles and can be read an unlimited number of times without limitations.

Please note that these answers are general and may vary depending on the specific implementation and requirements of your technical solution.