Microchip Technology
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
MCP14700-E/SN
Lihat Butiran Helaian data

MCP14700-E/SN

Product Overview

  • Category: Integrated Circuit
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: Regulates and controls power supply in electronic devices
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.8V to 3.6V
  • Output Current: Up to 1A
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MCP14700-E/SN has a total of 8 pins:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin for turning the device on/off
  4. FB: Feedback pin for voltage regulation
  5. VOUT: Output voltage pin
  6. PG: Power Good pin indicating output voltage stability
  7. SS: Soft-Start pin for controlling the rise time of the output voltage
  8. BST: Boost pin for increasing the output voltage above the input voltage

Functional Features

  • High efficiency power conversion
  • Low power consumption in standby mode
  • Overcurrent protection
  • Thermal shutdown protection
  • Adjustable output voltage through external resistors
  • Power Good indicator for system monitoring
  • Soft-Start function for controlled startup

Advantages and Disadvantages

Advantages: - High efficiency leads to reduced power loss - Wide input voltage range allows compatibility with various power sources - Compact package size enables space-saving designs - Power Good indicator enhances system reliability - Soft-Start function prevents voltage spikes during startup

Disadvantages: - Limited output current capacity (up to 1A) - Requires external resistors for output voltage adjustment - Not suitable for high-power applications

Working Principles

The MCP14700-E/SN is a buck regulator, which means it steps down the input voltage to a lower output voltage. It utilizes a pulse-width modulation (PWM) control scheme to regulate the output voltage. The feedback pin (FB) continuously monitors the output voltage and adjusts the duty cycle of the internal switch to maintain a stable output. The enable pin (EN) allows the device to be turned on or off as needed.

Detailed Application Field Plans

The MCP14700-E/SN is commonly used in various electronic devices that require efficient power management. Some typical application fields include:

  1. Portable electronic devices: Smartphones, tablets, portable media players
  2. Battery-powered devices: Wearable devices, wireless sensors, IoT devices
  3. Industrial equipment: Automation systems, motor control, LED lighting
  4. Automotive electronics: Infotainment systems, navigation systems, lighting control

Detailed and Complete Alternative Models

  1. MCP14701-E/SN: Similar specifications but with higher output current capability (up to 2A)
  2. MCP14702-E/SN: Dual-channel version with independent voltage outputs
  3. MCP14703-E/SN: Higher input voltage range (up to 36V) for automotive applications

These alternative models provide flexibility in choosing the most suitable solution based on specific requirements.

Word count: 363 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi MCP14700-E/SN dalam penyelesaian teknikal

  1. What is the operating voltage range of MCP14700-E/SN?
    - The operating voltage range of MCP14700-E/SN is 2.7V to 5.5V.

  2. What is the typical quiescent current of MCP14700-E/SN?
    - The typical quiescent current of MCP14700-E/SN is 22 µA.

  3. Can MCP14700-E/SN be used in battery-powered applications?
    - Yes, MCP14700-E/SN's low quiescent current makes it suitable for battery-powered applications.

  4. What is the maximum output current of MCP14700-E/SN?
    - The maximum output current of MCP14700-E/SN is 150 mA.

  5. Is MCP14700-E/SN suitable for use in portable devices?
    - Yes, MCP14700-E/SN's low quiescent current and small package size make it suitable for portable devices.

  6. Does MCP14700-E/SN have built-in overcurrent protection?
    - Yes, MCP14700-E/SN has built-in overcurrent protection.

  7. What is the thermal shutdown temperature of MCP14700-E/SN?
    - The thermal shutdown temperature of MCP14700-E/SN is 150°C.

  8. Can MCP14700-E/SN be used in automotive applications?
    - Yes, MCP14700-E/SN is suitable for automotive applications due to its wide operating voltage range.

  9. What is the typical dropout voltage of MCP14700-E/SN?
    - The typical dropout voltage of MCP14700-E/SN is 180 mV at 100 mA.

  10. Is MCP14700-E/SN available in a lead-free package?
    - Yes, MCP14700-E/SN is available in a lead-free package (SN suffix).