Microchip Technology
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
MCP14700T-E/SN
Lihat Butiran Helaian data

MCP14700T-E/SN

Product Overview

  • Category: Integrated Circuit
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: Surface Mount
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.8V to 3.6V
  • Maximum Output Current: 1A
  • Dropout Voltage: 200mV at 1A
  • Operating Temperature Range: -40°C to +85°C
  • Quiescent Current: 45µA (typical)

Detailed Pin Configuration

The MCP14700T-E/SN has a total of 6 pins:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. VOUT: Output voltage pin
  6. PG: Power Good pin

Functional Features

  • High efficiency power conversion
  • Low power consumption in standby mode
  • Overcurrent and thermal protection
  • Power Good output signal for system monitoring
  • Adjustable output voltage through external resistors

Advantages and Disadvantages

Advantages: - High efficiency results in reduced power dissipation - Wide input voltage range allows for versatile applications - Compact surface mount package saves board space - Power Good output provides system reliability

Disadvantages: - Limited maximum output current may not be suitable for high-power applications - Dropout voltage may affect performance in low input voltage scenarios

Working Principles

The MCP14700T-E/SN is a voltage regulator that converts an input voltage within the range of 2.7V to 5.5V to a regulated output voltage between 0.8V and 3.6V. It achieves high efficiency by utilizing a synchronous buck converter architecture. The regulator operates in continuous mode, providing a stable output voltage even during load transients.

The device incorporates overcurrent and thermal protection mechanisms to ensure safe operation. Additionally, the Power Good pin provides an output signal that indicates when the output voltage is within the specified range, allowing for system monitoring and fault detection.

Detailed Application Field Plans

The MCP14700T-E/SN is commonly used in various applications, including:

  1. Battery-powered devices: Provides efficient power conversion for portable electronics such as smartphones, tablets, and wearables.
  2. IoT devices: Suitable for low-power Internet of Things (IoT) applications, enabling extended battery life.
  3. Industrial equipment: Used in industrial control systems, sensors, and automation devices that require stable and reliable power supply.
  4. Automotive electronics: Supports automotive applications where compact size and high efficiency are essential.

Detailed and Complete Alternative Models

  1. MCP1700T-3302E/TT: Low dropout voltage regulator with fixed output voltage of 3.3V.
  2. MCP1755S-5002E/DB: High current linear voltage regulator with adjustable output voltage.
  3. MCP16301T-I/CHY: Buck-boost voltage regulator suitable for wide input voltage range applications.

These alternative models offer similar functionality and can be considered based on specific requirements and design constraints.

Word count: 346 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi MCP14700T-E/SN dalam penyelesaian teknikal

  1. What is the operating voltage range of MCP14700T-E/SN?
    - The operating voltage range of MCP14700T-E/SN is 2.7V to 5.5V.

  2. What is the typical quiescent current of MCP14700T-E/SN?
    - The typical quiescent current of MCP14700T-E/SN is 22µA.

  3. Can MCP14700T-E/SN be used in battery-powered applications?
    - Yes, MCP14700T-E/SN can be used in battery-powered applications due to its low quiescent current and wide operating voltage range.

  4. What is the maximum output current of MCP14700T-E/SN?
    - The maximum output current of MCP14700T-E/SN is 150mA.

  5. Is MCP14700T-E/SN suitable for low-power IoT devices?
    - Yes, MCP14700T-E/SN is suitable for low-power IoT devices due to its low quiescent current and efficient power management.

  6. Does MCP14700T-E/SN have built-in overcurrent protection?
    - Yes, MCP14700T-E/SN has built-in overcurrent protection to safeguard the connected circuitry.

  7. Can MCP14700T-E/SN be used in automotive electronics applications?
    - Yes, MCP14700T-E/SN can be used in automotive electronics applications due to its wide operating voltage range and robust design.

  8. What is the thermal shutdown temperature of MCP14700T-E/SN?
    - The thermal shutdown temperature of MCP14700T-E/SN is 150°C.

  9. Is MCP14700T-E/SN compatible with ceramic capacitors?
    - Yes, MCP14700T-E/SN is compatible with ceramic capacitors, providing flexibility in component selection.

  10. Can MCP14700T-E/SN be used in portable consumer electronics?
    - Yes, MCP14700T-E/SN can be used in portable consumer electronics due to its low power consumption and small footprint.