Microchip Technology
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
MIC2583-KBQS
Lihat Butiran Helaian data

MIC2583-KBQS

Product Overview

Category

MIC2583-KBQS belongs to the category of integrated circuits (ICs).

Use

This product is primarily used for power management and control applications.

Characteristics

  • High efficiency
  • Low power consumption
  • Compact size
  • Wide input voltage range

Package

MIC2583-KBQS is available in a small outline package (SOP) with 16 pins.

Essence

The essence of MIC2583-KBQS lies in its ability to efficiently manage and control power in various electronic devices.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Input Voltage Range: 4.5V to 40V
  • Output Voltage Range: 0.8V to 5.5V
  • Maximum Output Current: 2A
  • Switching Frequency: 500kHz
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. VCC: Power supply pin
  6. PGND: Power ground pin
  7. SW: Switch pin
  8. LX: Inductor connection pin
  9. BOOT: Bootstrap capacitor pin
  10. SS/TR: Soft-start/Tracking pin
  11. COMP: Compensation pin
  12. UVLO: Undervoltage lockout pin
  13. OCSET: Overcurrent protection pin
  14. SS/TR: Soft-start/Tracking pin
  15. PGND: Power ground pin
  16. VCC: Power supply pin

Functional Features

  • Integrated high-side and low-side MOSFET drivers
  • Adjustable output voltage
  • Overcurrent protection
  • Soft-start and tracking functionality
  • Undervoltage lockout

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption
  • Wide input voltage range allows for versatile applications
  • Compact size enables space-saving designs
  • Integrated MOSFET drivers simplify circuit design

Disadvantages

  • Limited maximum output current (2A)
  • Operating temperature range may not be suitable for extreme environments

Working Principles

MIC2583-KBQS operates based on a pulse-width modulation (PWM) control scheme. It regulates the output voltage by adjusting the duty cycle of the switching signal. The integrated MOSFET drivers ensure efficient power transfer from the input to the output.

Detailed Application Field Plans

MIC2583-KBQS finds applications in various fields, including: 1. Power supplies for consumer electronics 2. Industrial automation systems 3. Automotive electronics 4. LED lighting systems 5. Battery charging circuits

Detailed and Complete Alternative Models

  1. MIC2584-KBQS: Similar to MIC2583-KBQS with higher maximum output current (3A)
  2. MIC2585-KBQS: Similar to MIC2583-KBQS with wider input voltage range (2.7V to 40V)
  3. MIC2586-KBQS: Similar to MIC2583-KBQS with additional overvoltage protection feature

These alternative models offer similar functionalities but with slight variations to cater to specific application requirements.

In conclusion, MIC2583-KBQS is an integrated circuit designed for efficient power management and control. Its compact size, wide input voltage range, and high efficiency make it suitable for various electronic devices. However, it has limitations in terms of maximum output current and operating temperature range. Nonetheless, it offers several advantages such as integrated MOSFET drivers and adjustable output voltage. Its working principle relies on PWM control, and it finds applications in diverse fields. Alternative models with different specifications are also available to meet specific needs.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi MIC2583-KBQS dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of MIC2583-KBQS in technical solutions:

  1. Q: What is MIC2583-KBQS? A: MIC2583-KBQS is a high-performance, dual-channel MOSFET driver IC designed for driving N-channel enhancement-mode MOSFETs in various applications.

  2. Q: What is the maximum voltage rating of MIC2583-KBQS? A: The maximum voltage rating of MIC2583-KBQS is typically 40V.

  3. Q: What is the maximum current rating of MIC2583-KBQS? A: The maximum current rating of MIC2583-KBQS is typically 2A.

  4. Q: Can MIC2583-KBQS be used in automotive applications? A: Yes, MIC2583-KBQS is suitable for automotive applications as it meets the necessary requirements such as AEC-Q100 Grade 1 qualification.

  5. Q: What is the input logic voltage level for MIC2583-KBQS? A: The input logic voltage level for MIC2583-KBQS is compatible with both TTL and CMOS levels.

  6. Q: Does MIC2583-KBQS have built-in protection features? A: Yes, MIC2583-KBQS includes built-in protection features like thermal shutdown, undervoltage lockout, and shoot-through protection.

  7. Q: Can MIC2583-KBQS operate at high temperatures? A: Yes, MIC2583-KBQS is designed to operate reliably at high temperatures, typically up to 125°C.

  8. Q: What is the typical propagation delay of MIC2583-KBQS? A: The typical propagation delay of MIC2583-KBQS is around 30ns.

  9. Q: Can MIC2583-KBQS be used in high-frequency switching applications? A: Yes, MIC2583-KBQS is suitable for high-frequency switching applications due to its fast rise and fall times.

  10. Q: What are some typical applications of MIC2583-KBQS? A: Some typical applications of MIC2583-KBQS include motor control, power supplies, LED lighting, solenoid drivers, and general-purpose MOSFET driving.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.