Microchip Technology
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
PIC10F200-E/P
Lihat Butiran Helaian data

PIC10F200-E/P

Product Overview

  • Category: Microcontroller
  • Use: Embedded systems, control applications
  • Characteristics: Low-power, small form factor, cost-effective
  • Package: DIP-8 (Dual In-line Package)
  • Essence: 8-bit RISC microcontroller
  • Packaging/Quantity: Tray packaging, 100 units per tray

Specifications

  • Architecture: Harvard
  • CPU Speed: 20 MHz
  • Program Memory Size: 256 words
  • RAM Size: 16 bytes
  • Digital I/O Pins: 4
  • Analog Input Pins: 3
  • Timers: 1 x 8-bit, 1 x 16-bit
  • Operating Voltage Range: 2.0V to 5.5V
  • Operating Temperature Range: -40°C to +125°C

Pin Configuration

The PIC10F200-E/P microcontroller has the following pin configuration:

VDD 1 8 VSS GP0 2 7 GP1 GP3 3 6 GP2 MCLR 4 5 NC

Functional Features

  • Low-power consumption for battery-powered applications
  • Integrated analog-to-digital converter (ADC) for sensor interfacing
  • On-chip oscillator for accurate timing
  • Enhanced EEPROM data memory for non-volatile storage
  • Built-in brown-out reset (BOR) for reliable operation

Advantages and Disadvantages

Advantages: - Compact size and low-cost make it suitable for space-constrained projects - Low-power operation extends battery life in portable devices - Wide operating voltage range allows flexibility in power supply options - Integrated peripherals reduce the need for external components

Disadvantages: - Limited program memory size may restrict the complexity of applications - Small number of I/O pins may limit the number of connected devices - Lack of advanced features compared to higher-end microcontrollers

Working Principles

The PIC10F200-E/P operates on a Harvard architecture, where separate program and data memories are used. It executes instructions from the program memory and stores data in the data memory. The microcontroller's CPU fetches instructions, decodes them, and performs the necessary operations.

The integrated peripherals, such as the ADC and timers, enable the microcontroller to interface with sensors, measure analog signals, and generate precise timing events. The low-power design allows the microcontroller to operate efficiently in battery-powered applications.

Detailed Application Field Plans

The PIC10F200-E/P is commonly used in various embedded control applications, including:

  1. Home automation systems
  2. Industrial control systems
  3. Automotive electronics
  4. Consumer electronics
  5. Medical devices
  6. Internet of Things (IoT) devices

Its small form factor, low-power consumption, and cost-effectiveness make it suitable for projects where space, power efficiency, and budget constraints are important factors.

Detailed and Complete Alternative Models

Some alternative models to the PIC10F200-E/P microcontroller include:

  1. ATtiny85 by Atmel
  2. MSP430G2553 by Texas Instruments
  3. STM8S003F3 by STMicroelectronics
  4. LPC810 by NXP Semiconductors
  5. PSoC 4 by Cypress Semiconductor

These alternatives offer similar functionalities and can be considered based on specific project requirements and preferences.

Word count: 457 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi PIC10F200-E/P dalam penyelesaian teknikal

  1. What is the maximum operating frequency of PIC10F200-E/P?

    • The maximum operating frequency of PIC10F200-E/P is 4 MHz.

  2. What are the key features of PIC10F200-E/P?

    • PIC10F200-E/P features 256 bytes of program memory, 16 bytes of data memory, and 4 I/O pins.

  3. Can PIC10F200-E/P be used for low-power applications?

    • Yes, PIC10F200-E/P is suitable for low-power applications due to its low power consumption and sleep mode.

  4. How many analog inputs does PIC10F200-E/P have?

    • PIC10F200-E/P has one analog input pin, AN0.

  5. Is it possible to program PIC10F200-E/P using C language?

    • Yes, PIC10F200-E/P can be programmed using C language with the appropriate compiler.

  6. What are the communication interfaces supported by PIC10F200-E/P?

    • PIC10F200-E/P supports serial communication through its USART module.

  7. Can PIC10F200-E/P be used in automotive applications?

    • Yes, PIC10F200-E/P can be used in automotive applications with proper consideration of environmental conditions.

  8. Does PIC10F200-E/P have built-in timers?

    • Yes, PIC10F200-E/P features a 8-bit timer/counter with prescaler.

  9. What development tools are available for programming PIC10F200-E/P?

    • Development tools such as MPLAB X IDE and PICkit programmers can be used for programming PIC10F200-E/P.

  10. Are there any application notes or reference designs available for PIC10F200-E/P?

    • Yes, Microchip provides application notes and reference designs for various applications of PIC10F200-E/P.