VN2410L-G
Product Category: Voltage Regulator
Basic Information Overview: - Category: Integrated Circuit - Use: Voltage regulation in electronic circuits - Characteristics: Low dropout voltage, high accuracy, low quiescent current - Package: TO-92, SOT-23 - Essence: Regulating voltage to a stable level - Packaging/Quantity: Typically available in reels of 3000 units
Specifications: - Input Voltage Range: 2.5V to 6.5V - Output Voltage Range: 1.2V to 5.5V - Dropout Voltage: 200mV at 150mA - Quiescent Current: 75µA - Load Regulation: 0.05% typical - Line Regulation: 0.03% typical
Detailed Pin Configuration: - Pin 1: Input Voltage (VIN) - Pin 2: Ground (GND) - Pin 3: Output Voltage (VOUT)
Functional Features: - Low dropout voltage for extended battery life - High accuracy for precise voltage regulation - Low quiescent current for minimal power consumption
Advantages and Disadvantages: - Advantages: - Stable output voltage - Wide input voltage range - Low dropout voltage - Disadvantages: - Limited maximum output current - Sensitive to external noise
Working Principles: The VN2410L-G operates by comparing the output voltage to a reference voltage and adjusting the pass element to maintain a stable output.
Detailed Application Field Plans: - Battery-powered devices - Portable electronics - IoT devices - Wearable technology
Detailed and Complete Alternative Models: - LM1117 - MCP1700 - XC6206
This completes the English editing encyclopedia entry structure format for VN2410L-G.
Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi VN2410L-G dalam penyelesaian teknikal
What is the VN2410L-G?
- The VN2410L-G is a high-side driver IC designed for automotive applications, capable of driving resistive, capacitive, and inductive loads.
What is the maximum load current supported by VN2410L-G?
- The VN2410L-G supports a maximum load current of 35A.
What is the input voltage range for VN2410L-G?
- The input voltage range for VN2410L-G is from 4.5V to 36V.
Can VN2410L-G handle short-circuit protection?
- Yes, VN2410L-G is equipped with short-circuit protection.
What is the typical on-state resistance of VN2410L-G?
- The typical on-state resistance of VN2410L-G is 3.5mΩ.
Is VN2410L-G suitable for use in automotive lighting applications?
- Yes, VN2410L-G is well-suited for automotive lighting applications due to its high load current capability and robust design.
Does VN2410L-G have built-in thermal shutdown protection?
- Yes, VN2410L-G features built-in thermal shutdown protection to prevent overheating.
What type of diagnostic feedback does VN2410L-G provide?
- VN2410L-G provides diagnostic feedback through an open-load detection feature.
Can VN2410L-G be used in 24V truck systems?
- Yes, VN2410L-G is compatible with 24V truck systems, making it suitable for a wide range of automotive applications.
What are the key advantages of using VN2410L-G in technical solutions?
- The key advantages of VN2410L-G include its high load current capacity, wide input voltage range, integrated protection features, and suitability for automotive applications.