Micron Technology Inc.
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
MT29C1G12MAACVAMD-5 IT TR

MT29C1G12MAACVAMD-5 IT TR

Overview

Category: Integrated Circuit (IC)

Use: Memory device

Characteristics: - High-speed operation - Low power consumption - Small form factor - Reliable performance

Package: Surface Mount Technology (SMT) package

Essence: NAND Flash memory

Packaging/Quantity: Tape and reel packaging, quantity varies

Specifications

  • Part Number: MT29C1G12MAACVAMD-5 IT TR
  • Memory Type: NAND Flash
  • Density: 1 Gb (Gigabit)
  • Organization: 128 M x 8 bits
  • Voltage Supply: 2.7V - 3.6V
  • Operating Temperature: -40°C to +85°C
  • Interface: Parallel
  • Speed: 5 ns (nanoseconds)
  • Package Type: TSOP (Thin Small Outline Package)
  • Pin Count: 48 pins

Detailed Pin Configuration

The MT29C1G12MAACVAMD-5 IT TR has a total of 48 pins. The pin configuration is as follows:

  1. VCCQ - Power supply for I/O buffers
  2. DQ0 - Data Input/Output 0
  3. DQ1 - Data Input/Output 1
  4. DQ2 - Data Input/Output 2
  5. DQ3 - Data Input/Output 3
  6. DQ4 - Data Input/Output 4
  7. DQ5 - Data Input/Output 5
  8. DQ6 - Data Input/Output 6
  9. DQ7 - Data Input/Output 7
  10. /WE - Write Enable
  11. /CE - Chip Enable
  12. /RE - Read Enable
  13. A0 - Address Input 0
  14. A1 - Address Input 1
  15. A2 - Address Input 2
  16. A3 - Address Input 3
  17. A4 - Address Input 4
  18. A5 - Address Input 5
  19. A6 - Address Input 6
  20. A7 - Address Input 7
  21. A8 - Address Input 8
  22. A9 - Address Input 9
  23. A10 - Address Input 10
  24. A11 - Address Input 11
  25. A12 - Address Input 12
  26. A13 - Address Input 13
  27. A14 - Address Input 14
  28. A15 - Address Input 15
  29. /R/B - Ready/Busy Output
  30. /CLE - Command Latch Enable
  31. /ALE - Address Latch Enable
  32. /WP - Write Protect
  33. VCC - Power supply for device
  34. GND - Ground 35-48. NC - No Connection

Functional Features

  • High-speed data transfer
  • Block erase and program operations
  • Error correction code (ECC) support
  • Wear-leveling algorithm for extended lifespan
  • Bad block management
  • Data protection features

Advantages

  • Fast read and write speeds
  • Low power consumption
  • Compact size
  • Reliable performance
  • Support for various operating temperatures
  • Easy integration into existing systems

Disadvantages

  • Limited storage capacity compared to other memory technologies
  • Finite number of erase/write cycles
  • Higher cost per unit compared to some alternative memory options

Working Principles

The MT29C1G12MAACVAMD-5 IT TR is based on NAND Flash memory technology. It stores data in a series of memory cells organized in a grid-like structure. Each cell can store multiple bits of data, allowing for high-density storage. The device uses electrical charges to represent binary data (0s and 1s). During read and write operations, voltages are applied to specific pins to access and modify the stored data.

Detailed Application Field Plans

The MT29C1G12MAACVAMD-5 IT TR is commonly used in various electronic devices and systems, including: - Solid-state drives (SSDs) - USB flash drives - Memory cards - Embedded systems - Consumer electronics - Industrial applications

Detailed and Complete Alternative Models

Some alternative models to the MT29C1G12MAACVAMD-5 IT TR include: - MT29C1G12MAACVAMD-5 IT - MT29C1G12MAACVAMD-6 IT - MT29C1G12MAACVAMD-7 IT - MT29C1G12MAACVAMD-5 IT TR2 - MT29C1G12MAACVAMD-5 IT TR3

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi MT29C1G12MAACVAMD-5 IT TR dalam penyelesaian teknikal

  1. Question: What is the MT29C1G12MAACVAMD-5 IT TR?
    Answer: The MT29C1G12MAACVAMD-5 IT TR is a specific model of memory chip used in technical solutions.

  2. Question: What is the capacity of the MT29C1G12MAACVAMD-5 IT TR?
    Answer: The MT29C1G12MAACVAMD-5 IT TR has a capacity of 1 gigabit (1 Gb).

  3. Question: What is the speed rating of the MT29C1G12MAACVAMD-5 IT TR?
    Answer: The MT29C1G12MAACVAMD-5 IT TR has a speed rating of 5 nanoseconds (5 ns).

  4. Question: What type of interface does the MT29C1G12MAACVAMD-5 IT TR use?
    Answer: The MT29C1G12MAACVAMD-5 IT TR uses a parallel interface.

  5. Question: Can the MT29C1G12MAACVAMD-5 IT TR be used in both consumer and industrial applications?
    Answer: Yes, the MT29C1G12MAACVAMD-5 IT TR is designed for use in both consumer and industrial applications.

  6. Question: Is the MT29C1G12MAACVAMD-5 IT TR compatible with various operating systems?
    Answer: Yes, the MT29C1G12MAACVAMD-5 IT TR is compatible with a wide range of operating systems.

  7. Question: What is the voltage requirement for the MT29C1G12MAACVAMD-5 IT TR?
    Answer: The MT29C1G12MAACVAMD-5 IT TR operates at a voltage of 3.3 volts (V).

  8. Question: Can the MT29C1G12MAACVAMD-5 IT TR be used in high-temperature environments?
    Answer: Yes, the MT29C1G12MAACVAMD-5 IT TR is designed to withstand high-temperature environments.

  9. Question: Does the MT29C1G12MAACVAMD-5 IT TR support error correction codes (ECC)?
    Answer: Yes, the MT29C1G12MAACVAMD-5 IT TR supports error correction codes for data integrity.

  10. Question: What is the expected lifespan of the MT29C1G12MAACVAMD-5 IT TR?
    Answer: The MT29C1G12MAACVAMD-5 IT TR has a long lifespan and is designed for reliable performance over an extended period of time.