Micron Technology Inc.
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
MT29F128G08CFABAWP:B

MT29F128G08CFABAWP:B

Product Category

The MT29F128G08CFABAWP:B belongs to the category of NAND Flash memory products.

Basic Information Overview

  • Category: NAND Flash Memory
  • Use: Data storage in electronic devices
  • Characteristics: High-speed read and write operations, non-volatile, high density
  • Package: BGA (Ball Grid Array)
  • Essence: Provides reliable and fast data storage for various electronic applications
  • Packaging/Quantity: Typically available in reels with varying quantities

Specifications

  • Capacity: 128GB
  • Interface: Parallel
  • Voltage: 3.3V
  • Speed: Up to 200MB/s read, 100MB/s write
  • Endurance: Up to 10,000 program/erase cycles

Detailed Pin Configuration

The detailed pin configuration for MT29F128G08CFABAWP:B can be found in the product datasheet provided by the manufacturer.

Functional Features

  • Fast read and write operations
  • High-density storage capacity
  • Low power consumption
  • Reliable data retention

Advantages

  • High-speed data transfer
  • Large storage capacity
  • Non-volatile memory
  • Suitable for a wide range of electronic devices

Disadvantages

  • Relatively higher cost compared to other types of memory
  • Limited program/erase cycles compared to some other memory technologies

Working Principles

The MT29F128G08CFABAWP:B operates based on the principles of NAND flash memory, utilizing electrically programmable cells to store data in a non-volatile manner.

Detailed Application Field Plans

  • Embedded systems
  • Solid-state drives (SSDs)
  • Consumer electronics
  • Industrial applications
  • Automotive infotainment systems

Detailed and Complete Alternative Models

  • Samsung K9K8G08U0D
  • Micron MT29F128G08CBACAWP

This information provides a comprehensive overview of the MT29F128G08CFABAWP:B NAND Flash memory product, including its category, basic information, specifications, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi MT29F128G08CFABAWP:B dalam penyelesaian teknikal

  1. What is the MT29F128G08CFABAWP:B?

    • The MT29F128G08CFABAWP:B is a 128Gb NAND flash memory device designed for use in various technical solutions, such as embedded systems, consumer electronics, and industrial applications.

  2. What are the key features of the MT29F128G08CFABAWP:B?

    • The key features of the MT29F128G08CFABAWP:B include high storage capacity, fast data transfer rates, low power consumption, and robust reliability.

  3. What interfaces does the MT29F128G08CFABAWP:B support?

    • The MT29F128G08CFABAWP:B supports standard NAND flash interfaces such as ONFI (Open NAND Flash Interface) and Toggle Mode.

  4. How can the MT29F128G08CFABAWP:B be integrated into an embedded system?

    • The MT29F128G08CFABAWP:B can be integrated into an embedded system through the use of appropriate NAND flash controllers and drivers that support its interface protocols.

  5. What are the recommended operating conditions for the MT29F128G08CFABAWP:B?

    • The recommended operating conditions for the MT29F128G08CFABAWP:B include specific voltage levels, temperature ranges, and timing requirements as outlined in the datasheet.

  6. What are the typical applications for the MT29F128G08CFABAWP:B?

    • Typical applications for the MT29F128G08CFABAWP:B include solid-state drives (SSDs), digital cameras, set-top boxes, and other devices requiring high-capacity non-volatile storage.

  7. How does the MT29F128G08CFABAWP:B handle data integrity and error correction?

    • The MT29F128G08CFABAWP:B incorporates advanced error correction techniques and wear-leveling algorithms to ensure data integrity and extend the lifespan of the memory cells.

  8. What are the considerations for designing with the MT29F128G08CFABAWP:B in industrial environments?

    • When designing with the MT29F128G08CFABAWP:B in industrial environments, factors such as temperature range, shock and vibration resistance, and long-term reliability should be taken into account.

  9. Can the MT29F128G08CFABAWP:B be used in automotive applications?

    • Yes, the MT29F128G08CFABAWP:B is suitable for automotive applications that require high-density, reliable storage solutions with extended temperature ranges and robust performance.

  10. Are there any specific programming considerations for the MT29F128G08CFABAWP:B?

    • Programming the MT29F128G08CFABAWP:B requires adherence to the specified command sequences, voltage levels, and timing parameters provided in the datasheet to ensure proper operation and data integrity.