1EZ100D10/TR12
Product Overview
Category:
1EZ100D10/TR12 belongs to the category of semiconductor devices.
Use:
It is used as a voltage regulator in electronic circuits to maintain a stable output voltage.
Characteristics:
- Low dropout voltage
- High accuracy
- Overcurrent protection
- Thermal shutdown protection
Package:
The 1EZ100D10/TR12 is available in a small surface-mount package.
Essence:
The essence of 1EZ100D10/TR12 lies in its ability to regulate voltage efficiently and reliably in various electronic applications.
Packaging/Quantity:
It is typically packaged in reels containing a specific quantity, such as 3000 units per reel.
Specifications
- Input Voltage Range: 3V to 18V
- Output Voltage: 1.0V
- Maximum Output Current: 100mA
- Dropout Voltage: 0.5V at 50mA
- Operating Temperature Range: -40°C to 125°C
Detailed Pin Configuration
1EZ100D10/TR12 has three pins: 1. Input (Vin) 2. Ground (GND) 3. Output (Vout)
Functional Features
- Voltage regulation
- Overcurrent protection
- Thermal shutdown protection
- Low dropout voltage
Advantages
- Stable output voltage
- Suitable for low-power applications
- Built-in protection features enhance reliability
Disadvantages
- Limited maximum output current
- Not suitable for high-power applications
Working Principles
1EZ100D10/TR12 operates by comparing the output voltage to a reference voltage and adjusting the pass element to maintain a constant output voltage. When the output current exceeds the specified limit, the overcurrent protection activates, and in case of excessive heat, the thermal shutdown protection ensures the device's safety.
Detailed Application Field Plans
1EZ100D10/TR12 is commonly used in: - Battery-powered devices - Portable electronics - Sensor modules - IoT devices
Detailed and Complete Alternative Models
Some alternative models to 1EZ100D10/TR12 include: - LM2937 - MCP1700 - XC6206
In conclusion, 1EZ100D10/TR12 is a reliable voltage regulator with essential features for low-power electronic applications, offering stability and protection mechanisms. Its compact size and efficiency make it a preferred choice for various electronic designs.
[Word count: 346]
Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi 1EZ100D10/TR12 dalam penyelesaian teknikal
What is 1EZ100D10/TR12 and what is its application in technical solutions?
- 1EZ100D10/TR12 is a voltage regulator diode commonly used to regulate voltage in various electronic circuits and technical solutions.
What is the maximum input voltage for 1EZ100D10/TR12?
- The maximum input voltage for 1EZ100D10/TR12 is typically around 35 volts.
What is the output voltage of 1EZ100D10/TR12?
- The output voltage of 1EZ100D10/TR12 is approximately 10 volts.
What are the typical applications of 1EZ100D10/TR12 in technical solutions?
- 1EZ100D10/TR12 is commonly used in power supplies, voltage regulators, and other electronic circuits where stable voltage regulation is required.
What is the maximum current rating for 1EZ100D10/TR12?
- The maximum current rating for 1EZ100D10/TR12 is usually around 100 mA.
Can 1EZ100D10/TR12 be used in automotive applications?
- Yes, 1EZ100D10/TR12 can be used in automotive applications where voltage regulation is necessary.
Is 1EZ100D10/TR12 suitable for low-power devices?
- Yes, 1EZ100D10/TR12 is suitable for low-power devices such as sensors, small motors, and microcontrollers.
What are the temperature specifications for 1EZ100D10/TR12?
- 1EZ100D10/TR12 typically has a temperature range of -55°C to 150°C, making it suitable for a wide range of environments.
Can 1EZ100D10/TR12 be used in conjunction with other voltage regulators?
- Yes, 1EZ100D10/TR12 can be used in combination with other voltage regulators to achieve specific voltage requirements in complex circuits.
Are there any common failure modes or issues associated with 1EZ100D10/TR12?
- Common issues with 1EZ100D10/TR12 include overheating due to excessive current, reverse voltage damage, and voltage spikes. Proper heat sinking and protection circuitry can mitigate these issues.