Microsemi Corporation
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
MPLAD7.5KP33A/TR
Lihat Butiran Helaian data

MPLAD7.5KP33A/TR

Introduction

The MPLAD7.5KP33A/TR is a high-performance transient voltage suppressor diode designed to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. This entry provides an overview of the MPLAD7.5KP33A/TR, including its product category, basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Product Category

The MPLAD7.5KP33A/TR belongs to the category of transient voltage suppressor diodes, specifically designed for surge protection in various electronic applications.

Basic Information Overview

  • Use: The MPLAD7.5KP33A/TR is used to protect electronic circuits from overvoltage transients.
  • Characteristics: It offers high surge capability, low clamping voltage, and fast response time.
  • Package: The device is available in a compact, surface-mount package.
  • Essence: Its essence lies in providing robust transient voltage protection for sensitive electronic components.
  • Packaging/Quantity: The MPLAD7.5KP33A/TR is typically supplied in reels or tubes, with quantities varying based on customer requirements.

Specifications

  • Voltage Rating: 7.5kV
  • Peak Pulse Power: 33A
  • Operating Temperature Range: -55°C to +175°C
  • Breakdown Voltage: 8.4V to 9.3V
  • Reverse Standoff Voltage: 6.4V to 7.1V
  • Peak Pulse Current: 100A
  • RoHS Compliant: Yes

Detailed Pin Configuration

The MPLAD7.5KP33A/TR features a standard diode package with two leads. The pin configuration is as follows: - Pin 1: Anode - Pin 2: Cathode

Functional Features

  • Transient Suppression: Effectively clamps transient voltages to safe levels.
  • Fast Response Time: Rapid reaction to transient events, minimizing the risk of damage to downstream components.
  • High Surge Capability: Capable of handling large surge currents without degradation.

Advantages and Disadvantages

Advantages

  • Robust surge protection
  • Fast response time
  • Compact form factor

Disadvantages

  • Higher cost compared to standard diodes
  • Sensitive to reverse bias conditions

Working Principles

The MPLAD7.5KP33A/TR operates by diverting excess transient current away from sensitive components, thereby limiting the voltage across the protected circuit. When a transient event occurs, the diode rapidly switches into its low-impedance state, shunting the excess energy to ground.

Detailed Application Field Plans

The MPLAD7.5KP33A/TR finds extensive use in various applications, including: - Telecommunication equipment - Industrial control systems - Power supplies - Automotive electronics - Medical devices - Consumer electronics

Detailed and Complete Alternative Models

  • MPLAD5.0KP10CA/TR: 5.0kV, 10A transient voltage suppressor diode
  • MPLAD15KP170CA/TR: 15kV, 170A transient voltage suppressor diode
  • MPLAD20KP230CA/TR: 20kV, 230A transient voltage suppressor diode

In summary, the MPLAD7.5KP33A/TR is a high-performance transient voltage suppressor diode that offers robust surge protection, fast response time, and a compact form factor. Its application spans across various industries, providing essential transient voltage protection for sensitive electronic equipment.

[Word Count: 510]

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi MPLAD7.5KP33A/TR dalam penyelesaian teknikal

Sure, here are 10 common questions and answers related to the application of MPLAD7.5KP33A/TR in technical solutions:

  1. Q: What is the maximum peak pulse power dissipation of MPLAD7.5KP33A/TR? A: The maximum peak pulse power dissipation is 7.5 kilowatts for a 10/1000μs waveform.

  2. Q: What is the breakdown voltage of MPLAD7.5KP33A/TR? A: The breakdown voltage is 33 volts.

  3. Q: Can MPLAD7.5KP33A/TR be used for surge protection in power supplies? A: Yes, it is suitable for surge protection in power supplies due to its high power dissipation capability.

  4. Q: Is MPLAD7.5KP33A/TR suitable for overvoltage protection in automotive electronics? A: Yes, it can be used for overvoltage protection in automotive electronics applications.

  5. Q: What is the response time of MPLAD7.5KP33A/TR? A: The response time is very fast, typically less than 1 picosecond.

  6. Q: Can MPLAD7.5KP33A/TR be used in telecommunications equipment for lightning protection? A: Yes, it is commonly used for lightning protection in telecommunications equipment.

  7. Q: Does MPLAD7.5KP33A/TR have a low clamping voltage? A: Yes, it has a low clamping voltage, which is important for protecting sensitive electronic components.

  8. Q: Is MPLAD7.5KP33A/TR RoHS compliant? A: Yes, it is RoHS compliant, making it suitable for use in environmentally conscious designs.

  9. Q: Can MPLAD7.5KP33A/TR be used in industrial control systems for transient voltage suppression? A: Absolutely, it is well-suited for transient voltage suppression in industrial control systems.

  10. Q: What is the operating temperature range of MPLAD7.5KP33A/TR? A: The operating temperature range is -55°C to +175°C, allowing for reliable performance in various environments.

I hope these questions and answers are helpful for your technical solutions! Let me know if you need further assistance.