Microsemi Corporation
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
MXPLAD15KP11CA
Lihat Butiran Helaian data

MXPLAD15KP11CA Product Overview

Introduction

The MXPLAD15KP11CA belongs to the category of high-power transient voltage suppressor (TVS) diodes. These diodes are designed to protect sensitive electronics from voltage transients induced by lightning, electrostatic discharge (ESD), and other transient voltage events.

Basic Information Overview

  • Category: High-power transient voltage suppressor diode
  • Use: Protection against voltage transients induced by lightning, ESD, and other transient voltage events
  • Characteristics: High power handling capability, fast response time, low clamping voltage
  • Package: Standard diode package
  • Essence: Safeguarding sensitive electronics from voltage transients
  • Packaging/Quantity: Typically available in reels or tubes, quantity varies based on manufacturer

Specifications

  • Voltage Rating: 15kV
  • Peak Pulse Power: 11kW
  • Breakdown Voltage: 16.7V
  • Maximum Clamping Voltage: 27.4V
  • Operating Temperature Range: -55°C to 175°C
  • Package Type: Axial leaded

Detailed Pin Configuration

The MXPLAD15KP11CA typically features an axial leaded package with two leads for connection. The pin configuration is as follows: - Pin 1: Anode - Pin 2: Cathode

Functional Features

  • High Power Handling: Capable of dissipating large amounts of transient power
  • Fast Response Time: Rapid reaction to transient voltage events
  • Low Clamping Voltage: Provides effective protection without allowing the voltage to rise to damaging levels

Advantages and Disadvantages

Advantages

  • Effective protection against high-energy transients
  • Fast response time ensures minimal impact on protected circuits
  • Low clamping voltage prevents damage to sensitive electronics

Disadvantages

  • Higher cost compared to standard diodes
  • Requires careful consideration of installation and layout due to high power dissipation

Working Principles

The MXPLAD15KP11CA operates on the principle of avalanche breakdown, where it rapidly conducts once the voltage across it exceeds the breakdown voltage. This action diverts the excess energy away from the protected circuit, limiting the voltage to a safe level.

Detailed Application Field Plans

The MXPLAD15KP11CA is commonly used in applications where protection against high-energy transients is critical. Some typical application fields include: - Telecommunication equipment - Power supplies - Industrial control systems - Automotive electronics - Renewable energy systems

Detailed and Complete Alternative Models

  • MXPLAD15KP13CA: Similar specifications with a higher breakdown voltage of 18.2V
  • MXPLAD15KP10CA: Lower clamping voltage with similar power handling capabilities
  • MXPLAD20KP11CA: Higher voltage rating for more demanding applications

In conclusion, the MXPLAD15KP11CA provides robust protection against high-energy transients, making it an essential component in safeguarding sensitive electronics across various industries.

Word count: 465

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi MXPLAD15KP11CA dalam penyelesaian teknikal

  1. What is MXPLAD15KP11CA?

    • MXPLAD15KP11CA is a high-performance transient voltage suppressor (TVS) diode designed to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

  2. What are the key features of MXPLAD15KP11CA?

    • The key features of MXPLAD15KP11CA include a peak pulse power dissipation of 15000W, low clamping voltage, fast response time, and high surge current capability.

  3. How does MXPLAD15KP11CA protect electronic equipment?

    • MXPLAD15KP11CA provides protection by diverting excessive current away from sensitive components, thereby limiting the voltage across the protected device during transient voltage events.

  4. In what applications can MXPLAD15KP11CA be used?

    • MXPLAD15KP11CA is commonly used in industrial, automotive, telecommunications, and consumer electronics applications to protect against transient voltage events such as lightning strikes, ESD, and inductive load switching.

  5. What is the operating temperature range of MXPLAD15KP11CA?

    • MXPLAD15KP11CA has an operating temperature range of -55°C to +175°C, making it suitable for use in a wide range of environmental conditions.

  6. What is the typical clamping voltage of MXPLAD15KP11CA?

    • The typical clamping voltage of MXPLAD15KP11CA is 18.2V at 100A, ensuring effective protection of downstream components.

  7. Does MXPLAD15KP11CA comply with industry standards?

    • Yes, MXPLAD15KP11CA complies with industry standards such as IEC 61000-4-5 for surge protection, ensuring its reliability and performance in demanding applications.

  8. Can MXPLAD15KP11CA be used in high-speed data line protection?

    • Yes, MXPLAD15KP11CA is suitable for high-speed data line protection due to its fast response time and low capacitance.

  9. What packaging options are available for MXPLAD15KP11CA?

    • MXPLAD15KP11CA is available in various package options, including DO-203AB (DO-27) and SMC (DO-214AB), providing flexibility for different application requirements.

  10. Is MXPLAD15KP11CA RoHS compliant?

    • Yes, MXPLAD15KP11CA is RoHS compliant, meeting environmental regulations for lead-free and hazardous substance-free materials.