Monolithic Power Systems Inc.
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
MP1482DS-LF
Lihat Butiran Helaian data

MP1482DS-LF

Product Overview

Category: Integrated Circuit (IC)

Use: Voltage Regulator

Characteristics: - High efficiency - Low dropout voltage - Wide input voltage range - Adjustable output voltage - Overcurrent protection - Thermal shutdown protection

Package: SOP-8

Essence: The MP1482DS-LF is a voltage regulator IC designed to provide a stable and regulated output voltage from a varying input voltage source.

Packaging/Quantity: The MP1482DS-LF is typically sold in reels containing 2500 units per reel.

Specifications

  • Input Voltage Range: 4.5V to 18V
  • Output Voltage Range: 0.8V to 16V
  • Maximum Output Current: 3A
  • Dropout Voltage: 300mV at 1A
  • Quiescent Current: 120μA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MP1482DS-LF has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin (active high)
  4. FB: Feedback pin for output voltage regulation
  5. SS: Soft-start pin for controlling the output voltage rise time
  6. PG: Power Good indicator pin
  7. SW: Switching node pin
  8. VOUT: Output voltage pin

Functional Features

  • High Efficiency: The MP1482DS-LF utilizes advanced circuitry to achieve high efficiency, minimizing power losses.
  • Low Dropout Voltage: The regulator maintains a low dropout voltage, ensuring stable output even when the input voltage is close to the desired output voltage.
  • Wide Input Voltage Range: The IC can accept a wide range of input voltages, making it suitable for various applications.
  • Adjustable Output Voltage: The output voltage can be adjusted within the specified range to meet specific requirements.
  • Overcurrent Protection: The IC incorporates overcurrent protection, safeguarding the circuit from excessive current flow.
  • Thermal Shutdown Protection: In case of excessive temperature rise, the IC automatically shuts down to prevent damage.

Advantages and Disadvantages

Advantages: - High efficiency operation - Wide input voltage range - Adjustable output voltage - Overcurrent and thermal protection

Disadvantages: - Limited maximum output current (3A)

Working Principles

The MP1482DS-LF operates as a step-down voltage regulator. It uses a switching mechanism to efficiently convert the higher input voltage to the desired lower output voltage. The internal control circuitry adjusts the duty cycle of the switching transistor to maintain a stable output voltage despite variations in the input voltage.

Detailed Application Field Plans

The MP1482DS-LF is commonly used in various electronic devices and systems, including but not limited to: - Power supplies - Battery-powered devices - Industrial equipment - Automotive electronics - LED lighting systems

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the MP1482DS-LF include: - LM2576-ADJ - LT1084CP-ADJ - TPS5430-ADJ - ADP2301-ADJ - MAX1507-ADJ

These alternative models can be considered based on specific application requirements and availability.

Word count: 334 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi MP1482DS-LF dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of MP1482DS-LF in technical solutions:

  1. Q: What is MP1482DS-LF? A: MP1482DS-LF is a specific model of power management integrated circuit (PMIC) designed for various technical applications.

  2. Q: What are the key features of MP1482DS-LF? A: The key features of MP1482DS-LF include high efficiency, wide input voltage range, adjustable output voltage, overcurrent protection, and thermal shutdown.

  3. Q: What are the typical applications of MP1482DS-LF? A: MP1482DS-LF is commonly used in applications such as portable devices, battery-powered systems, industrial equipment, and automotive electronics.

  4. Q: What is the maximum input voltage supported by MP1482DS-LF? A: MP1482DS-LF can handle input voltages ranging from 4.5V to 28V.

  5. Q: Can MP1482DS-LF provide multiple output voltages? A: No, MP1482DS-LF is a single-output PMIC that provides a regulated output voltage based on the desired configuration.

  6. Q: How efficient is MP1482DS-LF? A: MP1482DS-LF offers high efficiency, typically above 90%, which helps minimize power losses and maximize battery life.

  7. Q: Does MP1482DS-LF have built-in protection features? A: Yes, MP1482DS-LF incorporates overcurrent protection, thermal shutdown, and short-circuit protection to safeguard the system and the IC itself.

  8. Q: Can MP1482DS-LF operate in a wide temperature range? A: Yes, MP1482DS-LF is designed to operate reliably in a temperature range of -40°C to +85°C.

  9. Q: Is MP1482DS-LF suitable for automotive applications? A: Yes, MP1482DS-LF is AEC-Q100 qualified, making it suitable for automotive electronics where high reliability and performance are required.

  10. Q: Are there any evaluation boards or reference designs available for MP1482DS-LF? A: Yes, Monolithic Power Systems (MPS) provides evaluation boards and reference designs that can help users quickly prototype and implement MP1482DS-LF in their applications.

Please note that the answers provided here are general and may vary depending on the specific requirements and use cases. It's always recommended to refer to the datasheet and application notes provided by the manufacturer for detailed information.