Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
74AHCT1G79GV-Q100H

Encyclopedia Entry: 74AHCT1G79GV-Q100H

Product Overview

Category

The 74AHCT1G79GV-Q100H belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in electronic devices for various applications, including signal amplification, logic gates, and voltage level shifting.

Characteristics

  • High-speed operation
  • Low power consumption
  • Wide operating voltage range
  • Compatibility with TTL and CMOS logic families

Package

The 74AHCT1G79GV-Q100H is available in a small form factor package, such as SOT-23 or SC-70. These packages offer compactness and ease of integration into circuit designs.

Essence

The essence of this product lies in its ability to provide reliable and efficient signal processing and logic functions within electronic systems.

Packaging/Quantity

Typically, the 74AHCT1G79GV-Q100H is supplied in reels or tubes, containing a specific quantity of ICs per package. The exact packaging and quantity may vary depending on the manufacturer's specifications.

Specifications

  • Supply Voltage: 2.0V to 5.5V
  • Operating Temperature Range: -40°C to +125°C
  • Input Voltage High Level (VIH): 0.7 x VCC
  • Input Voltage Low Level (VIL): 0.3 x VCC
  • Output Voltage High Level (VOH): 0.9 x VCC
  • Output Voltage Low Level (VOL): 0.1 x VCC
  • Maximum Propagation Delay: 8 ns

Detailed Pin Configuration

The 74AHCT1G79GV-Q100H has a simple pin configuration consisting of the following pins:

  1. GND (Ground)
  2. A (Input A)
  3. B (Input B)
  4. Q (Output)

Functional Features

The key functional features of the 74AHCT1G79GV-Q100H include:

  • Dual positive-edge-triggered D flip-flop
  • Asynchronous set and reset inputs for data storage
  • Complementary outputs for easy integration into logic circuits
  • High-speed operation for time-critical applications

Advantages and Disadvantages

Advantages

  • Low power consumption makes it suitable for battery-powered devices
  • Wide operating voltage range allows compatibility with various systems
  • Compact package size enables space-saving designs
  • High-speed operation ensures efficient signal processing

Disadvantages

  • Limited number of flip-flops in a single IC package
  • May require additional external components for certain applications
  • Sensitivity to electrostatic discharge (ESD) requires proper handling during assembly and usage

Working Principles

The 74AHCT1G79GV-Q100H operates based on the principles of digital logic. It utilizes flip-flops to store and process binary information. The asynchronous set and reset inputs allow for data storage and retrieval, while the complementary outputs provide the desired logic levels.

Detailed Application Field Plans

The 74AHCT1G79GV-Q100H finds application in various fields, including but not limited to:

  1. Consumer Electronics: Used in smartphones, tablets, and wearable devices for signal processing and logic functions.
  2. Automotive: Integrated into automotive electronics for control systems, sensor interfaces, and communication modules.
  3. Industrial Automation: Employed in programmable logic controllers (PLCs), motor control units, and industrial sensors.
  4. Communication Systems: Utilized in networking equipment, routers, and modems for data transmission and reception.

Detailed and Complete Alternative Models

  1. 74HC1G79GW-Q100H: Similar functionality with slightly different electrical characteristics.
  2. SN74LVC1G79DBVR: Alternative IC with comparable features and pin configuration.
  3. MC74VHC1G79DFT1G: Another option offering similar functionality and performance.

Note: The above alternative models are provided as examples and may vary based on availability and specific requirements.


Word Count: 550 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi 74AHCT1G79GV-Q100H dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of 74AHCT1G79GV-Q100H in technical solutions:

Q1: What is the 74AHCT1G79GV-Q100H? A1: The 74AHCT1G79GV-Q100H is a single positive-edge triggered D-type flip-flop with reset, from Texas Instruments.

Q2: What is the operating voltage range for this flip-flop? A2: The operating voltage range for the 74AHCT1G79GV-Q100H is between 4.5V and 5.5V.

Q3: What is the maximum clock frequency supported by this flip-flop? A3: The maximum clock frequency supported by the 74AHCT1G79GV-Q100H is 100 MHz.

Q4: Can I use this flip-flop in battery-powered applications? A4: Yes, the 74AHCT1G79GV-Q100H can be used in battery-powered applications as it operates within the typical battery voltage range.

Q5: Does this flip-flop have a reset function? A5: Yes, the 74AHCT1G79GV-Q100H has a reset function that allows you to clear the output to a known state.

Q6: What is the typical propagation delay of this flip-flop? A6: The typical propagation delay of the 74AHCT1G79GV-Q100H is around 7 ns.

Q7: Can I cascade multiple flip-flops together? A7: Yes, you can cascade multiple 74AHCT1G79GV-Q100H flip-flops together to create larger registers or counters.

Q8: Is this flip-flop compatible with other logic families? A8: Yes, the 74AHCT1G79GV-Q100H is compatible with other logic families such as TTL and CMOS.

Q9: What is the power consumption of this flip-flop? A9: The power consumption of the 74AHCT1G79GV-Q100H is typically low, making it suitable for power-sensitive applications.

Q10: Can I use this flip-flop in high-speed data transmission applications? A10: Yes, the 74AHCT1G79GV-Q100H can be used in high-speed data transmission applications due to its fast switching characteristics.

Please note that these answers are general and may vary depending on specific application requirements.