Nexperia USA Inc.
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
74HC241DB,112
Lihat Butiran Helaian data

74HC241DB,112

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Buffer/Line Driver
  • Characteristics: High-speed, CMOS technology, 3-state outputs
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: A high-performance octal buffer/line driver with 3-state outputs
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 2V to 6V
  • Input Voltage Range: 0V to VCC
  • Output Voltage Range: 0V to VCC
  • Operating Temperature Range: -40°C to +125°C
  • Propagation Delay Time: 9 ns (typical)
  • Output Current: ±6 mA
  • Input Capacitance: 3.5 pF
  • Output Capacitance: 8 pF

Pin Configuration

The 74HC241DB,112 has a total of 20 pins. The pin configuration is as follows:

  1. GND (Ground)
  2. A1 (Input A1)
  3. Y1 (Output Y1)
  4. A2 (Input A2)
  5. Y2 (Output Y2)
  6. A3 (Input A3)
  7. Y3 (Output Y3)
  8. A4 (Input A4)
  9. Y4 (Output Y4)
  10. OE (Output Enable)
  11. Y5 (Output Y5)
  12. A5 (Input A5)
  13. Y6 (Output Y6)
  14. A6 (Input A6)
  15. Y7 (Output Y7)
  16. A7 (Input A7)
  17. Y8 (Output Y8)
  18. VCC (Supply Voltage)
  19. GND (Ground)
  20. NC (No Connection)

Functional Features

  • Octal buffer/line driver with 3-state outputs
  • High-speed operation, suitable for various applications
  • CMOS technology ensures low power consumption
  • 3-state outputs allow multiple devices to share a common bus

Advantages and Disadvantages

Advantages: - High-speed operation enables efficient data transfer - CMOS technology provides low power consumption - 3-state outputs allow for easy bus sharing

Disadvantages: - Limited output current may restrict certain applications - Requires careful handling due to sensitivity to electrostatic discharge (ESD)

Working Principles

The 74HC241DB,112 is designed to buffer and drive signals in digital systems. It accepts input signals from A1 to A7 and provides corresponding output signals from Y1 to Y8. The OE (Output Enable) pin controls the output state of the device. When OE is high, the outputs are in the high-impedance state, allowing other devices to drive the bus. When OE is low, the inputs are transferred to the outputs.

Detailed Application Field Plans

The 74HC241DB,112 can be used in various applications, including but not limited to: - Data communication systems - Address decoding circuits - Memory interfacing - Bus drivers

Alternative Models

Other alternative models that can be considered as replacements for the 74HC241DB,112 include: - SN74HC241N by Texas Instruments - MC74HC241AN by ON Semiconductor - CD74HC241E by Texas Instruments

These alternative models offer similar functionality and can be used interchangeably depending on availability and specific requirements.

In conclusion, the 74HC241DB,112 is a high-performance octal buffer/line driver with 3-state outputs. Its high-speed operation, CMOS technology, and versatile applications make it a valuable component in digital systems.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi 74HC241DB,112 dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of 74HC241DB,112 in technical solutions:

  1. Q: What is the 74HC241DB,112? A: The 74HC241DB,112 is a 3-state octal buffer/line driver with input latches.

  2. Q: What is the purpose of the 74HC241DB,112? A: It is used to provide buffering and signal amplification for digital signals in various electronic circuits.

  3. Q: What is the maximum voltage that can be applied to the inputs of the 74HC241DB,112? A: The maximum voltage that can be applied to the inputs is VCC + 0.5V.

  4. Q: What is the maximum output current of the 74HC241DB,112? A: The maximum output current is typically 6mA per channel.

  5. Q: Can the 74HC241DB,112 be used with both TTL and CMOS logic levels? A: Yes, it is compatible with both TTL and CMOS logic levels.

  6. Q: How many input and output pins does the 74HC241DB,112 have? A: It has 8 input pins and 8 output pins.

  7. Q: What is the power supply voltage range for the 74HC241DB,112? A: The power supply voltage range is typically between 2V and 6V.

  8. Q: Can the 74HC241DB,112 be used in high-speed applications? A: Yes, it has a typical propagation delay of 9ns, making it suitable for high-speed applications.

  9. Q: Is the 74HC241DB,112 capable of driving capacitive loads? A: Yes, it can drive capacitive loads up to 50pF.

  10. Q: Can the 74HC241DB,112 be used in both parallel and serial data transfer applications? A: Yes, it can be used in both parallel and serial data transfer applications, depending on the circuit configuration.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements of the 74HC241DB,112.