PZU3.6DB2,115

Product Overview

Use

It is used for voltage regulation and protection in electronic circuits.

Characteristics

Forward voltage: 3.6V
Power dissipation: 500mW
Package type: SOD-323
Reverse current: 5μA
Tolerance: ±5%

Packaging/Quantity

PZU3.6DB2,115 is typically packaged in reels with a quantity of 3000 units per reel.

Essence

The essence of PZU3.6DB2,115 lies in its ability to provide stable voltage regulation and protect sensitive components in electronic circuits.

Specifications

Forward Voltage: 3.6V
Power Dissipation: 500mW
Reverse Current: 5μA
Tolerance: ±5%
Package Type: SOD-323
Quantity per Reel: 3000 units

Detailed Pin Configuration

PZU3.6DB2,115 has two pins: 1. Anode (A) 2. Cathode (K)

Functional Features

Precise voltage regulation
Low reverse current
Compact SOD-323 package

Advantages

Stable voltage regulation
Low power dissipation
Small form factor

Disadvantages

Limited maximum power dissipation
Tolerance of ±5% may not be suitable for all applications

Working Principles

PZU3.6DB2,115 operates based on the Zener effect, where it maintains a constant voltage across its terminals when reverse biased.

Detailed Application Field Plans

PZU3.6DB2,115 is commonly used in: - Voltage regulators - Overvoltage protection circuits - Signal clamping circuits

Detailed and Complete Alternative Models

Some alternative models to PZU3.6DB2,115 include: - BZX84C3V6 - MMSZ5240BT1G - 1N4728A

In conclusion, PZU3.6DB2,115 is a Zener diode with a forward voltage of 3.6V, primarily used for voltage regulation and protection in electronic circuits. Its compact SOD-323 package and precise voltage regulation make it suitable for various applications in electronics. However, its limited power dissipation and tolerance of ±5% should be considered when selecting it for specific designs.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi PZU3.6DB2,115 dalam penyelesaian teknikal

Sure, here are 10 common questions and answers related to the application of PZU3.6DB2,115 in technical solutions:

What is PZU3.6DB2,115?
- PZU3.6DB2,115 is a type of varistor, which is an electronic component used to protect circuits from overvoltage conditions.
What is the maximum voltage rating for PZU3.6DB2,115?
- The maximum voltage rating for PZU3.6DB2,115 is 3.6V.
What is the typical application of PZU3.6DB2,115 in technical solutions?
- PZU3.6DB2,115 is commonly used for overvoltage protection in low-voltage electronic circuits, such as in consumer electronics and industrial control systems.
How does PZU3.6DB2,115 provide overvoltage protection?
- PZU3.6DB2,115 acts as a voltage-dependent resistor, conducting excess voltage away from sensitive components and limiting the voltage across the circuit.
What are the key characteristics of PZU3.6DB2,115 that make it suitable for technical solutions?
- PZU3.6DB2,115 has fast response time, high surge current capability, and low leakage current, making it ideal for protecting electronic circuits.
Can PZU3.6DB2,115 be used in automotive applications?
- Yes, PZU3.6DB2,115 can be used in automotive electronics to protect against voltage transients and surges.
Are there any temperature limitations for PZU3.6DB2,115?
- PZU3.6DB2,115 typically has a wide operating temperature range, but it's important to check the datasheet for specific temperature limitations.
Is PZU3.6DB2,115 suitable for use in outdoor environments?
- PZU3.6DB2,115 can be used in outdoor environments, but proper encapsulation or packaging may be necessary to protect it from moisture and other environmental factors.
What are the mounting options for PZU3.6DB2,115?
- PZU3.6DB2,115 is available in surface mount and through-hole packages, providing flexibility for different PCB layouts and assembly processes.
Are there any alternative varistors with similar specifications to PZU3.6DB2,115?
- Yes, there are varistors with comparable voltage ratings and characteristics from other manufacturers, so it's worth comparing datasheets to find the best fit for specific technical solutions.