NXP USA Inc.
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
BC557,116
Lihat Butiran Helaian data

BC557,116

Product Overview

Category:

BC557,116 belongs to the category of PNP transistors.

Use:

It is commonly used for amplification and switching purposes in electronic circuits.

Characteristics:

  • Low power dissipation
  • High current gain
  • Low noise

Package:

The BC557,116 transistor is typically available in a TO-92 package.

Packaging/Quantity:

It is usually packaged in reels or tubes containing a quantity of 1000 units.

Specifications

  • Collector-Emitter Voltage (VCEO): 45V
  • Collector-Base Voltage (VCBO): 50V
  • Emitter-Base Voltage (VEBO): 5V
  • Collector Current (IC): 100mA
  • Power Dissipation (PD): 625mW
  • DC Current Gain (hFE): 110-800
  • Transition Frequency (fT): 150MHz

Detailed Pin Configuration

The BC557,116 transistor has three pins: the emitter, base, and collector. The pin configuration is as follows: - Emitter (E) - Pin 1 - Base (B) - Pin 2 - Collector (C) - Pin 3

Functional Features

The BC557,116 transistor offers the following functional features: - High current gain - Low noise - Suitable for low-power applications

Advantages and Disadvantages

Advantages

  • Low power dissipation
  • High current gain
  • Low noise performance

Disadvantages

  • Limited maximum collector current
  • Relatively low transition frequency

Working Principles

The BC557,116 operates based on the principles of PNP transistor action. When a small current flows into the base of the transistor, it controls a much larger current between the collector and emitter.

Detailed Application Field Plans

The BC557,116 transistor finds application in various electronic circuits, including: - Audio amplifiers - Signal amplification - Switching circuits - Oscillator circuits

Detailed and Complete Alternative Models

Some alternative models to BC557,116 include: - BC558 - 2N3906 - 2SA1943 - 2N4403

In conclusion, the BC557,116 PNP transistor is a versatile component with applications in amplification and switching circuits. Its low power dissipation, high current gain, and low noise characteristics make it suitable for a wide range of electronic applications.

Word Count: 298

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi BC557,116 dalam penyelesaian teknikal

  1. What is the BC557,116 transistor used for?

    • The BC557,116 is a PNP bipolar junction transistor commonly used for amplification and switching applications in electronic circuits.

  2. What are the typical operating conditions for the BC557,116 transistor?

    • The BC557,116 transistor typically operates at a maximum collector current of 100mA and a maximum collector-emitter voltage of 45V.

  3. How can I identify the pinout of the BC557,116 transistor?

    • The pinout of the BC557,116 transistor is typically identified as the emitter (E), base (B), and collector (C) pins, with the flat side facing towards you and the pins down.

  4. Can the BC557,116 transistor be used for audio amplifier applications?

    • Yes, the BC557,116 transistor can be used in low-power audio amplifier circuits due to its ability to amplify small signals.

  5. What are some common circuit configurations using the BC557,116 transistor?

    • Common circuit configurations include common emitter, common collector, and common base configurations for amplification and switching purposes.

  6. How do I calculate the base resistor value for driving the BC557,116 transistor?

    • The base resistor value can be calculated using Ohm's law and the desired base current to ensure proper biasing and operation of the transistor.

  7. What are the typical applications of the BC557,116 transistor in technical solutions?

    • The BC557,116 transistor is commonly used in audio preamplifiers, signal amplification, voltage regulators, and general purpose switching circuits.

  8. Can the BC557,116 transistor be used in high-frequency applications?

    • The BC557,116 transistor is not suitable for high-frequency applications due to its limited frequency response and transition frequency.

  9. What are the key parameters to consider when selecting the BC557,116 transistor for a specific application?

    • Key parameters include maximum collector current, maximum power dissipation, gain bandwidth product, and voltage ratings to ensure proper performance and reliability.

  10. Are there any common pitfalls or considerations when using the BC557,116 transistor in technical solutions?

    • It's important to consider thermal management, proper biasing, and voltage limitations to avoid damaging the transistor and ensure stable operation in the circuit.