NXP USA Inc.
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
MC705C9ACPE
Lihat Butiran Helaian data

MC705C9ACPE

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Microcontroller
  • Characteristics: High-performance, low-power consumption
  • Package: Ceramic package
  • Essence: Advanced microcontroller with versatile features
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies based on customer requirements

Specifications

  • Manufacturer: XYZ Corporation
  • Model Number: MC705C9ACPE
  • Operating Voltage: 3.3V
  • Clock Frequency: 16 MHz
  • Flash Memory: 32 KB
  • RAM: 2 KB
  • Number of Pins: 64
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The MC705C9ACPE microcontroller has a total of 64 pins, each serving a specific purpose. The pin configuration is as follows:

  1. VDD: Power supply voltage input
  2. VSS: Ground reference
  3. RESET: Reset input
  4. XTAL1: Crystal oscillator input
  5. XTAL2: Crystal oscillator output
  6. P0.0: General-purpose I/O pin
  7. P0.1: General-purpose I/O pin
  8. P0.2: General-purpose I/O pin
  9. P0.3: General-purpose I/O pin
  10. P0.4: General-purpose I/O pin
  11. P0.5: General-purpose I/O pin
  12. P0.6: General-purpose I/O pin
  13. P0.7: General-purpose I/O pin
  14. P1.0: General-purpose I/O pin
  15. P1.1: General-purpose I/O pin
  16. P1.2: General-purpose I/O pin
  17. P1.3: General-purpose I/O pin
  18. P1.4: General-purpose I/O pin
  19. P1.5: General-purpose I/O pin
  20. P1.6: General-purpose I/O pin
  21. P1.7: General-purpose I/O pin
  22. P2.0: General-purpose I/O pin
  23. P2.1: General-purpose I/O pin
  24. P2.2: General-purpose I/O pin
  25. P2.3: General-purpose I/O pin
  26. P2.4: General-purpose I/O pin
  27. P2.5: General-purpose I/O pin
  28. P2.6: General-purpose I/O pin
  29. P2.7: General-purpose I/O pin
  30. P3.0: General-purpose I/O pin
  31. P3.1: General-purpose I/O pin
  32. P3.2: General-purpose I/O pin
  33. P3.3: General-purpose I/O pin
  34. P3.4: General-purpose I/O pin
  35. P3.5: General-purpose I/O pin
  36. P3.6: General-purpose I/O pin
  37. P3.7: General-purpose I/O pin
  38. A0: Analog input channel 0
  39. A1: Analog input channel 1
  40. A2: Analog input channel 2
  41. A3: Analog input channel 3
  42. A4: Analog input channel 4
  43. A5: Analog input channel 5
  44. A6: Analog input channel 6
  45. A7: Analog input channel 7
  46. RSTOUT: Reset output
  47. IRQ: Interrupt request input
  48. VPP: Programming voltage input
  49. VDD: Power supply voltage input
  50. VSS: Ground reference
  51. OSCIN: Oscillator input
  52. OSCOUT: Oscillator output
  53. TEST: Test mode pin 54-64: Reserved pins

Functional Features

  • High-performance microcontroller with advanced architecture
  • Low-power consumption for energy-efficient applications
  • Versatile I/O capabilities for interfacing with external devices
  • Integrated analog-to-digital converter (ADC) for precise measurements
  • Built-in timers and counters for accurate timing operations
  • On-chip memory for program storage and data handling
  • Support for various communication protocols such as UART, SPI, and I2C
  • Enhanced security features to protect sensitive data

Advantages and Disadvantages

Advantages: - High performance and low power consumption - Versatile I/O capabilities - Integrated analog-to-digital converter - Support for multiple communication protocols - Enhanced security features

Disadvantages: - Limited number of pins for I/O expansion - Relatively small amount of flash memory compared to some other models

#

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi MC705C9ACPE dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of MC705C9ACPE in technical solutions:

  1. Q: What is MC705C9ACPE? A: MC705C9ACPE is a microcontroller unit (MCU) manufactured by Freescale Semiconductor, commonly used in embedded systems.

  2. Q: What are the key features of MC705C9ACPE? A: Some key features of MC705C9ACPE include an 8-bit CPU, on-chip memory, multiple I/O ports, timers, and analog-to-digital converters.

  3. Q: What are the typical applications of MC705C9ACPE? A: MC705C9ACPE is often used in various technical solutions such as industrial control systems, automotive electronics, consumer electronics, and medical devices.

  4. Q: How can I program MC705C9ACPE? A: MC705C9ACPE can be programmed using assembly language or high-level programming languages like C or C++. Development tools like Integrated Development Environments (IDEs) and compilers are available for this purpose.

  5. Q: Can MC705C9ACPE communicate with other devices? A: Yes, MC705C9ACPE supports various communication protocols such as UART, SPI, and I2C, allowing it to communicate with other devices like sensors, displays, and external memory.

  6. Q: Is MC705C9ACPE suitable for low-power applications? A: Yes, MC705C9ACPE is designed to operate at low power and has power-saving features like sleep modes and clock gating, making it suitable for battery-powered or energy-efficient applications.

  7. Q: Can MC705C9ACPE handle real-time tasks? A: Yes, MC705C9ACPE has built-in timers and interrupt capabilities, allowing it to handle real-time tasks with precise timing requirements.

  8. Q: Are there any development boards available for MC705C9ACPE? A: Yes, there are development boards specifically designed for MC705C9ACPE, which provide easy prototyping and debugging capabilities.

  9. Q: Can I use MC705C9ACPE in safety-critical applications? A: MC705C9ACPE is not specifically certified for safety-critical applications. However, it can be used in such applications with proper design considerations and adherence to relevant safety standards.

  10. Q: Where can I find documentation and support for MC705C9ACPE? A: Documentation, datasheets, application notes, and technical support for MC705C9ACPE can be found on the manufacturer's website or through their authorized distributors.