NXP USA Inc.
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
MCZ33903DP5EKR2
Lihat Butiran Helaian data

MCZ33903DP5EKR2

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Motor Control
  • Characteristics: High-performance, automotive-grade motor control IC
  • Package: DP5EK
  • Essence: Provides advanced motor control capabilities for automotive applications
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies based on supplier

Specifications

  • Operating Voltage: 4.5V to 18V
  • Operating Temperature Range: -40°C to +125°C
  • Number of Pins: 32
  • Motor Type Supported: Brushed DC motors
  • Current Rating: Up to 3A per channel
  • Protection Features: Overcurrent protection, thermal shutdown, reverse battery protection

Detailed Pin Configuration

  1. VBAT: Battery voltage supply
  2. GND: Ground reference
  3. IN1: Input control signal for Channel 1
  4. OUT1: Output for Channel 1
  5. VREF1: Reference voltage for Channel 1
  6. VDD: Logic supply voltage
  7. IN2: Input control signal for Channel 2
  8. OUT2: Output for Channel 2
  9. VREF2: Reference voltage for Channel 2
  10. DIAG1: Diagnostic output for Channel 1
  11. DIAG2: Diagnostic output for Channel 2
  12. CS: Current sense input
  13. PWM: Pulse Width Modulation input
  14. EN: Enable input
  15. FAULT: Fault indication output
  16. VREG: Regulator output voltage
  17. VCP: Charge pump capacitor connection
  18. CP1: Charge pump capacitor connection
  19. CP2: Charge pump capacitor connection
  20. CP3: Charge pump capacitor connection
  21. CP4: Charge pump capacitor connection
  22. CP5: Charge pump capacitor connection
  23. CP6: Charge pump capacitor connection
  24. CP7: Charge pump capacitor connection
  25. CP8: Charge pump capacitor connection
  26. CP9: Charge pump capacitor connection
  27. CP10: Charge pump capacitor connection
  28. CP11: Charge pump capacitor connection
  29. CP12: Charge pump capacitor connection
  30. CP13: Charge pump capacitor connection
  31. CP14: Charge pump capacitor connection
  32. CP15: Charge pump capacitor connection

Functional Features

  • Dual-channel motor control with independent inputs and outputs
  • Integrated charge pump for high-side gate drive
  • Overcurrent protection to prevent damage to the motor and IC
  • Thermal shutdown feature to protect against overheating
  • Reverse battery protection to safeguard the circuit from reverse polarity

Advantages and Disadvantages

Advantages: - High-performance motor control capabilities - Automotive-grade quality and reliability - Comprehensive protection features - Compact package size for space-constrained applications

Disadvantages: - Limited to brushed DC motor control - Higher cost compared to generic motor control ICs

Working Principles

The MCZ33903DP5EKR2 is designed to control brushed DC motors in automotive applications. It utilizes a dual-channel architecture, allowing independent control of two motors. The IC receives input control signals (IN1 and IN2) and generates corresponding output signals (OUT1 and OUT2) to drive the motors. The integrated charge pump provides the necessary high-side gate drive voltage.

The IC incorporates various protection features such as overcurrent protection, thermal shutdown, and reverse battery protection. These safeguards ensure the motor and IC remain safe under abnormal operating conditions.

Detailed Application Field Plans

The MCZ33903DP5EKR2 is widely used in automotive systems that require precise control of brushed DC motors. Some common applications include:

  1. Electric power steering systems
  2. HVAC blowers and fans
  3. Window lift and wiper control
  4. Seat adjustment mechanisms
  5. Sunroof control

Detailed and Complete Alternative Models

  1. MC33903EK: Similar functionality, different package (EK)
  2. MC33904EK: Quad-channel version for controlling four motors simultaneously
  3. MC33905DP5EKR2: Enhanced version with additional features like current sensing and diagnostics

Note: The above alternative models are provided as examples and may not cover all available alternatives in the market.

This entry provides a comprehensive overview of the MCZ33903DP5EKR2 motor control IC. It includes information on its product category, use, characteristics, package, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi MCZ33903DP5EKR2 dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of MCZ33903DP5EKR2 in technical solutions:

  1. Q: What is MCZ33903DP5EKR2? A: MCZ33903DP5EKR2 is a highly integrated System Basis Chip (SBC) designed for automotive applications, specifically for use in LIN (Local Interconnect Network) bus systems.

  2. Q: What is the purpose of MCZ33903DP5EKR2? A: MCZ33903DP5EKR2 serves as a communication interface between various electronic control units (ECUs) in a vehicle, enabling data transfer over the LIN bus.

  3. Q: What are the key features of MCZ33903DP5EKR2? A: Some key features include LIN transceiver, voltage regulator, watchdog timer, low-dropout regulator, and various protection features like over-temperature and over-voltage protection.

  4. Q: How does MCZ33903DP5EKR2 ensure reliable communication on the LIN bus? A: MCZ33903DP5EKR2 incorporates features like bus wake-up capability, dominant timeout detection, and error detection/correction mechanisms to ensure reliable communication on the LIN bus.

  5. Q: Can MCZ33903DP5EKR2 be used in non-automotive applications? A: While MCZ33903DP5EKR2 is primarily designed for automotive applications, it can also be used in other industrial or consumer electronics applications that require LIN bus communication.

  6. Q: What is the operating voltage range of MCZ33903DP5EKR2? A: MCZ33903DP5EKR2 operates within a voltage range of 5V to 27V, making it suitable for a wide range of automotive and industrial applications.

  7. Q: Does MCZ33903DP5EKR2 support sleep mode? A: Yes, MCZ33903DP5EKR2 supports sleep mode, which helps in reducing power consumption when the LIN bus is idle.

  8. Q: Can MCZ33903DP5EKR2 be used in LIN slave or master configurations? A: Yes, MCZ33903DP5EKR2 can be used in both LIN slave and master configurations, providing flexibility in designing LIN bus systems.

  9. Q: What are the typical applications of MCZ33903DP5EKR2? A: MCZ33903DP5EKR2 is commonly used in automotive applications such as body control modules, door modules, seat modules, lighting control modules, and HVAC systems.

  10. Q: Are there any evaluation boards or development kits available for MCZ33903DP5EKR2? A: Yes, NXP Semiconductors provides evaluation boards and development kits that include MCZ33903DP5EKR2, allowing engineers to easily prototype and test their designs.

Please note that the answers provided here are general and may vary depending on specific application requirements. It's always recommended to refer to the datasheet and documentation provided by the manufacturer for detailed information.