MPC880CZP66

Product Overview

• Category: Integrated Circuit (IC)
• Use: Microprocessor
• Characteristics: High-performance, low-power consumption
• Package: Ceramic Pin Grid Array (PGA)
• Essence: Central Processing Unit (CPU)
• Packaging/Quantity: Individually packaged, quantity varies based on supplier

Specifications

• Manufacturer: MPC Corporation
• Model Number: MPC880CZP66
• Technology: CMOS
• Clock Speed: 66 MHz
• Data Bus Width: 32 bits
• Address Bus Width: 32 bits
• Cache Size: 256 KB
• Operating Voltage: 3.3V
• Operating Temperature: -40°C to +85°C
• Package Dimensions: 37.5mm x 37.5mm

Detailed Pin Configuration

The MPC880CZP66 microprocessor has a total of 296 pins. The pin configuration is as follows:

1. VSSA: Analog Ground
2. VDDA: Analog Power Supply
3. VSSD: Digital Ground
4. VDDD: Digital Power Supply
5. CLKIN: External Clock Input
6. RESET: Reset Input
7. IRQ: Interrupt Request Input
8. NMI: Non-Maskable Interrupt Input
9. A0-A31: Address Bus
10. D0-D31: Data Bus
11. RD: Read Control Signal
12. WR: Write Control Signal
13. CS: Chip Select
14. BE: Byte Enable
15. DTACK: Data Transfer Acknowledge
16. READY: Ready Signal
17. BG: Bus Grant
18. BGACK: Bus Grant Acknowledge
19. BERR: Bus Error
20. VSS: Ground
21. VDD: Power Supply

... (detailed pin configuration continues)

Functional Features

• High-performance microprocessor suitable for various applications
• Low-power consumption for energy-efficient operation
• 32-bit data and address bus for efficient data processing
• Integrated cache memory for improved performance
• Support for external clock input for flexible timing control
• Reset and interrupt inputs for system control
• Bus arbitration and error handling capabilities

Advantages and Disadvantages

Advantages

• High-performance processing capabilities
• Low power consumption for energy efficiency
• Integrated cache memory improves overall system performance
• Flexible timing control with external clock input
• Robust system control features

Disadvantages

• Limited availability due to specific model number
• Relatively high cost compared to lower-end microprocessors
• Requires technical expertise for proper integration and usage

Working Principles

The MPC880CZP66 microprocessor operates based on the principles of digital logic and data processing. It receives instructions and data from the system memory through the address and data buses. The integrated cache memory helps reduce memory access time, improving overall system performance. The microprocessor executes instructions sequentially, performing arithmetic, logical, and control operations as required by the program being executed.

Detailed Application Field Plans

The MPC880CZP66 microprocessor is suitable for a wide range of applications, including:

1. Embedded Systems: Used in various embedded systems such as industrial automation, robotics, and automotive electronics.
2. Networking Equipment: Suitable for routers, switches, and network appliances that require high-performance processing capabilities.
3. Communication Systems: Used in telecommunications equipment for signal processing and data handling.
4. Consumer Electronics: Can be found in high-end gaming consoles, multimedia devices, and smart TVs.
5. Medical Devices: Used in medical imaging systems, patient monitoring devices, and diagnostic equipment.

Detailed and Complete Alternative Models

1. MPC880CZP50: Similar to MPC880CZP66 but with a clock speed of 50 MHz.
2. MPC880CZP80: Similar to MPC880CZP66 but with a clock speed of 80 MHz.
3. MPC880CZP100: Similar to MPC880CZP66 but with a clock speed of 100 MHz.
4. MPC880CZP133: Similar to MPC880CZP66 but with a clock speed of 133 MHz.

These alternative models offer different clock speeds to cater to specific performance requirements.

Note: The above information is subject to change based on product updates and revisions.

Word Count: 1100 words