Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
PCA9554TS,118

PCA9554TS,118

Product Overview

Category

PCA9554TS,118 belongs to the category of integrated circuits (ICs).

Use

This product is commonly used for input/output (I/O) expansion in various electronic devices.

Characteristics

  • I2C-bus interface compatibility
  • 8-bit remote I/O port with interrupt and reset
  • Low standby current consumption
  • Schmitt trigger action on all inputs
  • Open-drain interrupt output
  • Polarity inversion register
  • Noise filter on SDA/SCL inputs
  • Latched outputs with high-current drive capability
  • ESD protection exceeds JESD 22, 2000-V human-body model (A114-A)
  • Package: TSSOP16

Packaging/Quantity

PCA9554TS,118 is typically packaged in a TSSOP16 package. Each package contains one unit of the product.

Specifications

  • Supply voltage range: 2.3 V to 5.5 V
  • Input voltage range: 0 V to VDD
  • Output voltage range: 0 V to VDD
  • Operating temperature range: -40°C to +85°C
  • I2C-bus frequency: 100 kHz, 400 kHz, or 1 MHz

Detailed Pin Configuration

The PCA9554TS,118 has a total of 16 pins arranged as follows:

  1. SDA - Serial data input/output pin
  2. SCL - Serial clock input pin
  3. A0 - Address input pin
  4. A1 - Address input pin
  5. A2 - Address input pin
  6. INT - Interrupt output pin
  7. RESET - Reset input pin
  8. P0 - Port 0 I/O pin
  9. P1 - Port 1 I/O pin
  10. P2 - Port 2 I/O pin
  11. P3 - Port 3 I/O pin
  12. P4 - Port 4 I/O pin
  13. P5 - Port 5 I/O pin
  14. P6 - Port 6 I/O pin
  15. P7 - Port 7 I/O pin
  16. GND - Ground pin

Functional Features

  • The PCA9554TS,118 provides 8-bit remote I/O port expansion through the I2C-bus interface.
  • It supports interrupt and reset functionalities for efficient control.
  • The Schmitt trigger action on all inputs ensures reliable signal processing.
  • The open-drain interrupt output allows easy integration with other devices.
  • The polarity inversion register enables flexible configuration of input/output polarities.
  • The noise filter on SDA/SCL inputs helps in reducing signal interference.
  • The latched outputs with high-current drive capability ensure robust performance.
  • The ESD protection exceeds industry standards, providing enhanced durability.

Advantages and Disadvantages

Advantages

  • Easy integration with I2C-bus compatible systems
  • Low power consumption in standby mode
  • Reliable signal processing with Schmitt trigger action
  • Flexible input/output polarity configuration
  • High-current drive capability for robust performance

Disadvantages

  • Limited number of I/O ports (8-bit)

Working Principles

The PCA9554TS,118 operates by communicating with a microcontroller or host device through the I2C-bus interface. It expands the available I/O ports by providing an additional 8-bit remote I/O port. The device can be configured to generate interrupts based on specific conditions, allowing efficient event-driven processing. The latched outputs with high-current drive capability enable the direct control of external devices. The product's working principles are based on the I2C communication protocol and the internal circuitry designed for I/O expansion.

Detailed Application Field Plans

The PCA9554TS,118 finds applications in various fields, including but not limited to:

  1. Consumer electronics: Used for I/O expansion in smart home devices, remote controls, and audio/video equipment.
  2. Industrial automation: Enables efficient control of sensors, actuators, and peripheral devices in industrial systems.
  3. Automotive electronics: Facilitates I/O expansion in automotive control units, infotainment systems, and lighting modules.
  4. Internet of Things (IoT): Supports I/O expansion in IoT devices, allowing seamless integration with other connected devices.
  5. Medical devices: Provides additional I/O ports for medical equipment, aiding in data acquisition and control.

Detailed and Complete Alternative Models

  1. PCA9554PW,112 - Similar functionality with a different package (TSSOP16)
  2. PCA9554DB,112 - Similar functionality with a different package (SSOP16)
  3. PCA9554D,112 - Similar functionality with a different package (SO16)

These alternative models offer similar features and can be considered as substitutes for the PCA9554TS,118 based on specific requirements and compatibility

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi PCA9554TS,118 dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of PCA9554TS,118:

1. What is PCA9554TS,118? PCA9554TS,118 is a 8-bit I2C-bus and SMBus I/O expander that provides remote I/O expansion for most microcontroller families.

2. What is the maximum voltage rating for PCA9554TS,118? The maximum voltage rating for PCA9554TS,118 is 5.5V.

3. How many I/O pins does PCA9554TS,118 have? PCA9554TS,118 has 8 I/O pins.

4. Can PCA9554TS,118 be used as both input and output pins? Yes, PCA9554TS,118 can be configured as either input or output pins individually.

5. What is the maximum current sourcing capability per pin? The maximum current sourcing capability per pin is 25mA.

6. Can PCA9554TS,118 be cascaded with other I/O expanders? Yes, PCA9554TS,118 can be cascaded with other I/O expanders using the I2C bus.

7. What is the I2C address range for PCA9554TS,118? The I2C address range for PCA9554TS,118 is 0x20 to 0x27.

8. Is there any internal pull-up resistor available on the I/O pins? Yes, PCA9554TS,118 has internal pull-up resistors that can be enabled or disabled for each I/O pin.

9. Can PCA9554TS,118 operate in a low-power mode? Yes, PCA9554TS,118 has a low-power mode that reduces power consumption when not actively driving the I/O pins.

10. What are some typical applications of PCA9554TS,118? Some typical applications of PCA9554TS,118 include LED dimming and control, keypad scanning, GPIO expansion, and general-purpose I/O interfacing.

Please note that the answers provided here are general and may vary depending on the specific implementation and requirements. It is always recommended to refer to the datasheet and application notes for detailed information.