NXP USA Inc.
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
SC68C2550BIB48,128
Lihat Butiran Helaian data

SC68C2550BIB48,128

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Microcontroller
  • Characteristics:
    • High-performance 8-bit microcontroller
    • Low power consumption
    • Wide operating voltage range
    • Large memory capacity
  • Package: BGA (Ball Grid Array)
  • Essence: Advanced microcontroller for various applications
  • Packaging/Quantity: 48-pin package, quantity of 128 units per order

Specifications

  • Architecture: 8-bit RISC
  • CPU Speed: Up to 25 MHz
  • Operating Voltage Range: 2.7V to 5.5V
  • Program Memory Size: 32 KB Flash
  • Data Memory Size: 2 KB RAM
  • I/O Pins: 36
  • Communication Interfaces: UART, SPI, I2C
  • Timers/Counters: 3
  • Analog-to-Digital Converter (ADC): 8 channels, 10-bit resolution
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The SC68C2550BIB48,128 has a total of 48 pins. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. GND - Ground
  3. P0.0 - General-purpose I/O pin
  4. P0.1 - General-purpose I/O pin
  5. P0.2 - General-purpose I/O pin
  6. P0.3 - General-purpose I/O pin
  7. P0.4 - General-purpose I/O pin
  8. P0.5 - General-purpose I/O pin
  9. P0.6 - General-purpose I/O pin
  10. P0.7 - General-purpose I/O pin
  11. P1.0 - General-purpose I/O pin
  12. P1.1 - General-purpose I/O pin
  13. P1.2 - General-purpose I/O pin
  14. P1.3 - General-purpose I/O pin
  15. P1.4 - General-purpose I/O pin
  16. P1.5 - General-purpose I/O pin
  17. P1.6 - General-purpose I/O pin
  18. P1.7 - General-purpose I/O pin
  19. P2.0 - General-purpose I/O pin
  20. P2.1 - General-purpose I/O pin
  21. P2.2 - General-purpose I/O pin
  22. P2.3 - General-purpose I/O pin
  23. P2.4 - General-purpose I/O pin
  24. P2.5 - General-purpose I/O pin
  25. P2.6 - General-purpose I/O pin
  26. P2.7 - General-purpose I/O pin
  27. P3.0 - General-purpose I/O pin
  28. P3.1 - General-purpose I/O pin
  29. P3.2 - General-purpose I/O pin
  30. P3.3 - General-purpose I/O pin
  31. P3.4 - General-purpose I/O pin
  32. P3.5 - General-purpose I/O pin
  33. P3.6 - General-purpose I/O pin
  34. P3.7 - General-purpose I/O pin
  35. RST - Reset pin
  36. XTAL1 - Crystal oscillator input
  37. XTAL2 - Crystal oscillator output
  38. ALE - Address Latch Enable
  39. PSEN - Program Store Enable
  40. EA/VPP - External Access/Programming Voltage Supply
  41. AD0 - Analog-to-Digital Converter input 0
  42. AD1 - Analog-to-Digital Converter input 1
  43. AD2 - Analog-to-Digital Converter input 2
  44. AD3 - Analog-to-Digital Converter input 3
  45. AD4 - Analog-to-Digital Converter input 4
  46. AD5 - Analog-to-Digital Converter input 5
  47. AD6 - Analog-to-Digital Converter input 6
  48. AD7 - Analog-to-Digital Converter input 7

Functional Features

  • High-performance 8-bit RISC architecture for efficient processing
  • Multiple communication interfaces (UART, SPI, I2C) for versatile connectivity
  • Built-in analog-to-digital converter (ADC) for precise analog signal measurements
  • Timers/counters for accurate timing and event counting
  • Large program memory size for storing complex applications
  • Low power consumption for energy-efficient operation
  • Wide operating voltage range for flexibility in various power supply conditions

Advantages and Disadvantages

Advantages: - High-performance microcontroller suitable for demanding applications - Versatile communication interfaces enable easy integration with other devices - Ample program memory capacity for complex software requirements - Low power consumption extends

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi SC68C2550BIB48,128 dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of SC68C2550BIB48,128 in technical solutions:

  1. Q: What is SC68C2550BIB48,128? A: SC68C2550BIB48,128 is a specific model of integrated circuit (IC) that belongs to the SC68C series. It is commonly used in technical solutions for various applications.

  2. Q: What are the key features of SC68C2550BIB48,128? A: Some key features of SC68C2550BIB48,128 include a high-performance 8-bit microcontroller, multiple communication interfaces, on-chip memory, and various peripherals.

  3. Q: What are the typical applications of SC68C2550BIB48,128? A: SC68C2550BIB48,128 is often used in applications such as industrial automation, embedded systems, smart meters, motor control, and communication devices.

  4. Q: How can I interface with SC68C2550BIB48,128? A: SC68C2550BIB48,128 supports multiple communication interfaces like UART, SPI, and I2C, which can be used to interface with other devices or modules.

  5. Q: What programming language can be used to program SC68C2550BIB48,128? A: SC68C2550BIB48,128 can be programmed using assembly language or high-level languages like C or C++.

  6. Q: Does SC68C2550BIB48,128 have any built-in peripherals? A: Yes, SC68C2550BIB48,128 has various built-in peripherals such as timers, PWM channels, ADCs, GPIO pins, and UARTs.

  7. Q: What is the operating voltage range of SC68C2550BIB48,128? A: The operating voltage range of SC68C2550BIB48,128 typically falls between 2.7V and 5.5V.

  8. Q: Can SC68C2550BIB48,128 be used in battery-powered applications? A: Yes, SC68C2550BIB48,128 can be used in battery-powered applications as it supports low-power modes and has features to optimize power consumption.

  9. Q: Is SC68C2550BIB48,128 suitable for real-time applications? A: Yes, SC68C2550BIB48,128 is suitable for real-time applications due to its high-performance microcontroller core and various timing peripherals.

  10. Q: Where can I find documentation and resources for SC68C2550BIB48,128? A: Documentation, datasheets, application notes, and other resources for SC68C2550BIB48,128 can usually be found on the manufacturer's website or through authorized distributors.