Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
SCC2692AE1N40,602

SCC2692AE1N40,602

Basic Information Overview

  • Category: Integrated Circuit (IC)
  • Use: Serial Communication Controller
  • Characteristics:
    • High-performance UART (Universal Asynchronous Receiver/Transmitter) with dual channels
    • Supports full-duplex asynchronous communication
    • Compatible with various serial protocols
  • Package: 40-pin DIP (Dual In-line Package)
  • Essence: Facilitates serial communication in electronic devices
  • Packaging/Quantity: Typically sold in reels of 1000 units

Specifications

  • Supply Voltage: 4.5V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Data Rate: Up to 1 Mbps
  • Number of Channels: 2
  • Data Word Length: 5 to 9 bits
  • Parity: Odd, Even, or None
  • Stop Bits: 1 or 2
  • FIFO Buffer Size: 16 bytes per channel
  • Interrupts: Programmable interrupt sources for efficient data handling

Detailed Pin Configuration

The SCC2692AE1N40,602 has a total of 40 pins. The pin configuration is as follows:

  1. VCC - Power supply voltage
  2. GND - Ground
  3. TxD1 - Transmit Data Channel 1
  4. RxD1 - Receive Data Channel 1
  5. CTS1 - Clear To Send Channel 1
  6. RTS1 - Request To Send Channel 1
  7. DSR1 - Data Set Ready Channel 1
  8. DCD1 - Data Carrier Detect Channel 1
  9. RI1 - Ring Indicator Channel 1
  10. TxD2 - Transmit Data Channel 2
  11. RxD2 - Receive Data Channel 2
  12. CTS2 - Clear To Send Channel 2
  13. RTS2 - Request To Send Channel 2
  14. DSR2 - Data Set Ready Channel 2
  15. DCD2 - Data Carrier Detect Channel 2
  16. RI2 - Ring Indicator Channel 2 17-20, 22-29, 31-34 - Reserved pins 21, 30 - Ground 35-40 - Reserved pins

Functional Features

  • Dual-channel UART with independent control and configuration
  • Programmable baud rate generator for flexible data transfer rates
  • Hardware flow control using CTS/RTS signals
  • Automatic hardware and software flow control modes
  • Error detection and handling mechanisms (parity, framing, overrun)
  • FIFO buffers for efficient data handling and reduced CPU overhead
  • Support for various serial protocols (RS-232, RS-485, etc.)
  • Low power consumption in sleep mode

Advantages

  • High-performance UART with dual channels allows simultaneous communication on separate channels.
  • Wide operating temperature range makes it suitable for industrial applications.
  • Flexible data word length, parity, and stop bit configurations cater to diverse communication requirements.
  • FIFO buffers enhance data throughput and reduce the burden on the host processor.
  • Support for multiple serial protocols ensures compatibility with different devices.

Disadvantages

  • Limited number of channels may not suffice for applications requiring more than two simultaneous serial communications.
  • Lack of built-in support for higher data rates beyond 1 Mbps may restrict usage in certain high-speed applications.
  • Availability of alternative models with additional features or improved specifications might limit its competitiveness in specific scenarios.

Working Principles

The SCC2692AE1N40,602 is a Serial Communication Controller that facilitates asynchronous serial communication between electronic devices. It operates based on the principles of UART, which converts parallel data into serial format for transmission and vice versa. The controller handles data framing, error detection, and flow control to ensure reliable and efficient communication.

Detailed Application Field Plans

The SCC2692AE1N40,602 finds applications in various fields, including: - Industrial automation systems - Telecommunications equipment - Data communication devices - Embedded systems - Robotics and control systems - Medical devices - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to the SCC2692AE1N40,602 are: - SCC2691AE1N40,602: Single-channel UART variant with similar specifications. - SCC2692BE1N40,602: Dual-channel UART with enhanced features like higher data rates or additional protocols support. - SCC2694AE1N40,602: Quad-channel UART for applications requiring more simultaneous serial communications.

Note: The above list is not exhaustive, and there may be other alternative models available from different manufacturers.

Word count: 1100 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi SCC2692AE1N40,602 dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of SCC2692AE1N40,602 in technical solutions:

Q1: What is SCC2692AE1N40,602? A1: SCC2692AE1N40,602 is a specific model of UART (Universal Asynchronous Receiver-Transmitter) integrated circuit commonly used for serial communication in technical solutions.

Q2: What are the key features of SCC2692AE1N40,602? A2: Some key features of SCC2692AE1N40,602 include dual-channel UART functionality, support for various baud rates, programmable interrupt controller, and compatibility with different voltage levels.

Q3: How can SCC2692AE1N40,602 be used in technical solutions? A3: SCC2692AE1N40,602 can be used to enable serial communication between microcontrollers, computers, and other devices. It can facilitate data transfer, control signals, and synchronization in various applications.

Q4: What is the maximum baud rate supported by SCC2692AE1N40,602? A4: SCC2692AE1N40,602 supports a maximum baud rate of 115,200 bits per second (bps).

Q5: Can SCC2692AE1N40,602 be used with both 3.3V and 5V systems? A5: Yes, SCC2692AE1N40,602 is compatible with both 3.3V and 5V systems, making it versatile for integration into different technical solutions.

Q6: Does SCC2692AE1N40,602 have built-in flow control mechanisms? A6: No, SCC2692AE1N40,602 does not have built-in flow control mechanisms. However, external flow control methods can be implemented if required.

Q7: Can SCC2692AE1N40,602 be used in industrial applications? A7: Yes, SCC2692AE1N40,602 is suitable for industrial applications due to its robust design and compatibility with different voltage levels.

Q8: Is SCC2692AE1N40,602 compatible with common microcontroller platforms? A8: Yes, SCC2692AE1N40,602 is compatible with popular microcontroller platforms such as Arduino, Raspberry Pi, and STM32, among others.

Q9: Are there any programming libraries or examples available for SCC2692AE1N40,602? A9: Yes, various programming libraries and example codes are available online that can help developers integrate SCC2692AE1N40,602 into their technical solutions.

Q10: Can SCC2692AE1N40,602 be used for wireless communication? A10: No, SCC2692AE1N40,602 is a wired UART IC and does not support wireless communication directly. However, it can be used in conjunction with other wireless modules for wireless data transmission.

Please note that the specific details and answers may vary depending on the manufacturer's documentation and application requirements.