UJA1069TW24/3V0:51
Product Overview
Category
The UJA1069TW24/3V0:51 belongs to the category of automotive communication and networking products.
Use
It is used for in-vehicle networking applications, specifically designed for use in automotive electronic control units (ECUs).
Characteristics
- High-speed CAN transceiver
- Supports 24 V systems
- Low-power mode for standby operation
- Robust EMC performance
- Compact package size
Package
The UJA1069TW24/3V0:51 is available in a small outline integrated circuit (SOIC) package.
Essence
The essence of this product lies in its ability to facilitate reliable and efficient communication within automotive ECUs, especially in high-voltage systems.
Packaging/Quantity
The UJA1069TW24/3V0:51 is typically packaged in reels and is available in varying quantities based on customer requirements.
Specifications
- Operating Voltage: 3.0 V to 5.5 V
- Supply Current: 10 µA in Standby Mode
- Data Rate: Up to 1 Mbps
- Operating Temperature Range: -40°C to 125°C
- Package Type: SOIC-8
Detailed Pin Configuration
The UJA1069TW24/3V0:51 features an 8-pin configuration with specific pins dedicated to power supply, ground, CAN bus connections, and other essential functions.
Functional Features
- High-speed CAN transceiver for reliable data transmission
- Support for 24 V automotive systems
- Low-power standby mode for energy efficiency
- Enhanced electromagnetic compatibility (EMC) performance
Advantages and Disadvantages
Advantages
- Robust communication capabilities in automotive environments
- Low-power standby mode for energy savings
- Compact form factor for space-constrained applications
Disadvantages
- Limited to 24 V systems, may not be suitable for lower voltage applications
- Higher cost compared to standard CAN transceivers
Working Principles
The UJA1069TW24/3V0:51 operates by facilitating the exchange of data between various ECUs within a vehicle through the Controller Area Network (CAN) protocol. It ensures reliable and efficient communication while supporting the specific voltage requirements of automotive systems.
Detailed Application Field Plans
The UJA1069TW24/3V0:51 is ideally suited for use in modern automotive systems, including but not limited to: - Engine Control Units (ECUs) - Transmission Control Units (TCUs) - Body Control Modules (BCMs) - Advanced Driver Assistance Systems (ADAS)
Detailed and Complete Alternative Models
Some alternative models to the UJA1069TW24/3V0:51 include: - UJA1069TW24/5V0:51 - Similar functionality with support for 5 V systems - UJA1069TW12/3V0:51 - Designed for 12 V automotive systems - UJA1069TW48/3V0:51 - Extended support for 48 V systems
In conclusion, the UJA1069TW24/3V0:51 offers a robust solution for high-speed CAN communication in automotive ECUs, catering to the specific voltage requirements of modern vehicles while providing reliable and efficient data exchange capabilities.
[Word Count: 526]
Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi UJA1069TW24/3V0:51 dalam penyelesaian teknikal
What is the maximum voltage rating for UJA1069TW24/3V0:51?
- The maximum voltage rating for UJA1069TW24/3V0:51 is 3.0V.What is the typical application of UJA1069TW24/3V0:51?
- UJA1069TW24/3V0:51 is commonly used in automotive electronic control units (ECUs) for communication and networking.Can UJA1069TW24/3V0:51 be used for CAN FD communication?
- Yes, UJA1069TW24/3V0:51 supports CAN FD communication with data rates up to 5 Mbps.What is the operating temperature range for UJA1069TW24/3V0:51?
- The operating temperature range for UJA1069TW24/3V0:51 is typically -40°C to 125°C.Does UJA1069TW24/3V0:51 have built-in protection features?
- Yes, UJA1069TW24/3V0:51 includes built-in protection features such as overtemperature and overvoltage protection.Can UJA1069TW24/3V0:51 be used in LIN bus applications?
- Yes, UJA1069TW24/3V0:51 can be used in LIN bus applications as a system basis chip (SBC).What is the power supply voltage range for UJA1069TW24/3V0:51?
- The power supply voltage range for UJA1069TW24/3V0:51 is typically 4.75V to 5.25V.Is UJA1069TW24/3V0:51 compliant with automotive industry standards?
- Yes, UJA1069TW24/3V0:51 is compliant with automotive industry standards such as ISO 11898-2 and ISO 11898-5.Can UJA1069TW24/3V0:51 be used in battery management systems (BMS)?
- Yes, UJA1069TW24/3V0:51 can be used in battery management systems for communication and networking functions.What are the key benefits of using UJA1069TW24/3V0:51 in technical solutions?
- The key benefits of using UJA1069TW24/3V0:51 include high-speed communication, robustness in automotive environments, and integrated protection features for reliable operation.