Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
MS46SR-20-870-Q1-10X-10R-NO-FP

MS46SR-20-870-Q1-10X-10R-NO-FP

Product Overview

Category

The MS46SR-20-870-Q1-10X-10R-NO-FP belongs to the category of precision sensors and actuators.

Use

It is used for precise measurement and control applications in various industries, including automotive, industrial automation, and robotics.

Characteristics

  • High precision and accuracy
  • Robust construction for durability
  • Wide operating temperature range
  • Compatibility with various control systems

Package

The MS46SR-20-870-Q1-10X-10R-NO-FP is typically packaged in a protective casing to ensure safe transportation and storage.

Essence

The essence of the MS46SR-20-870-Q1-10X-10R-NO-FP lies in its ability to provide reliable and accurate feedback for control systems, enabling precise and efficient operation.

Packaging/Quantity

It is usually packaged individually and is available in single-unit quantities.

Specifications

  • Model: MS46SR-20-870-Q1-10X-10R-NO-FP
  • Measurement Range: 20mm
  • Operating Voltage: 10V
  • Output Type: Analog (4-20mA)
  • Resolution: 0.01mm
  • Operating Temperature: -40°C to 125°C
  • Protection Rating: IP67

Detailed Pin Configuration

The detailed pin configuration of the MS46SR-20-870-Q1-10X-10R-NO-FP includes power supply, ground, and analog output pins, as well as additional pins for communication and configuration.

Functional Features

  • Precise distance measurement
  • Analog output for seamless integration with control systems
  • Built-in temperature compensation for accurate performance across varying temperatures
  • Robust construction for reliable operation in harsh environments

Advantages and Disadvantages

Advantages

  • High precision and accuracy
  • Wide operating temperature range
  • Robust construction for durability
  • Seamless integration with control systems

Disadvantages

  • Relatively higher cost compared to standard sensors
  • Requires careful calibration for optimal performance

Working Principles

The MS46SR-20-870-Q1-10X-10R-NO-FP operates based on the principle of magnetostrictive sensing, where a moving magnet generates a torsional stress wave in a magnetostrictive wire, allowing for precise measurement of position or displacement.

Detailed Application Field Plans

The MS46SR-20-870-Q1-10X-10R-NO-FP is ideal for applications such as: - Automotive manufacturing for precise assembly and quality control - Industrial automation for accurate positioning and process control - Robotics for precise motion control and object detection

Detailed and Complete Alternative Models

  • Model A: MS36SR-18-850-Q1-8X-8R-NO-FP
  • Model B: MS56SR-22-880-Q1-12X-12R-NO-FP
  • Model C: MS66SR-25-900-Q1-15X-15R-NO-FP

This completes the entry for the MS46SR-20-870-Q1-10X-10R-NO-FP precision sensor and actuator, covering its basic information overview, specifications, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi MS46SR-20-870-Q1-10X-10R-NO-FP dalam penyelesaian teknikal

  1. What is the operating voltage of MS46SR-20-870-Q1-10X-10R-NO-FP?

    • The operating voltage of MS46SR-20-870-Q1-10X-10R-NO-FP is typically 20V.
  2. What is the maximum load current for MS46SR-20-870-Q1-10X-10R-NO-FP?

    • The maximum load current for MS46SR-20-870-Q1-10X-10R-NO-FP is 10A.
  3. What is the contact arrangement of MS46SR-20-870-Q1-10X-10R-NO-FP?

    • MS46SR-20-870-Q1-10X-10R-NO-FP has a single-pole, normally open (SPNO) contact arrangement.
  4. What is the typical application of MS46SR-20-870-Q1-10X-10R-NO-FP in technical solutions?

    • MS46SR-20-870-Q1-10X-10R-NO-FP is commonly used in automotive and industrial control systems for switching high-current loads.
  5. What is the temperature range for MS46SR-20-870-Q1-10X-10R-NO-FP?

    • The temperature range for MS46SR-20-870-Q1-10X-10R-NO-FP is typically -40°C to 85°C.
  6. Is MS46SR-20-870-Q1-10X-10R-NO-FP suitable for harsh environments?

    • Yes, MS46SR-20-870-Q1-10X-10R-NO-FP is designed to withstand harsh environmental conditions.
  7. What are the mounting options for MS46SR-20-870-Q1-10X-10R-NO-FP?

    • MS46SR-20-870-Q1-10X-10R-NO-FP can be mounted using through-hole or surface-mount techniques.
  8. Does MS46SR-20-870-Q1-10X-10R-NO-FP have any special sealing or coating for protection?

    • Yes, MS46SR-20-870-Q1-10X-10R-NO-FP may come with special sealing or coating options for enhanced protection against moisture and contaminants.
  9. Can MS46SR-20-870-Q1-10X-10R-NO-FP be used in safety-critical applications?

    • MS46SR-20-870-Q1-10X-10R-NO-FP may be suitable for safety-critical applications, but it's important to verify compliance with relevant safety standards.
  10. What are the common failure modes of MS46SR-20-870-Q1-10X-10R-NO-FP?

    • Common failure modes of MS46SR-20-870-Q1-10X-10R-NO-FP include contact welding, contact erosion, and insulation breakdown under high voltage conditions. Regular testing and maintenance are recommended to prevent these failures.