ON Semiconductor
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
1N961BTR
Lihat Butiran Helaian data

1N961BTR

Product Overview

Category

The 1N961BTR belongs to the category of semiconductor devices, specifically a diode.

Use

It is commonly used in electronic circuits for rectification and signal demodulation.

Characteristics

  • Forward voltage drop: Typically around 0.7V
  • Reverse breakdown voltage: Varies based on specific model
  • Fast switching speed
  • Small form factor

Package

The 1N961BTR is typically available in a small surface mount package.

Essence

This diode is essential for converting alternating current (AC) to direct current (DC) in electronic circuits.

Packaging/Quantity

It is usually supplied in reels or tubes, with quantities varying based on manufacturer and supplier.

Specifications

  • Maximum forward voltage: 1V
  • Maximum reverse voltage: 75V
  • Maximum forward current: 200mA
  • Operating temperature range: -65°C to 175°C

Detailed Pin Configuration

The 1N961BTR typically has two pins, with the anode connected to the positive side of the circuit and the cathode connected to the negative side.

Functional Features

  • Efficient rectification of AC signals
  • Fast response time
  • Compact size for space-constrained applications

Advantages and Disadvantages

Advantages

  • Low forward voltage drop
  • Fast switching speed
  • Small form factor

Disadvantages

  • Limited maximum reverse voltage
  • Relatively low maximum forward current

Working Principles

The 1N961BTR operates on the principle of creating a one-way flow of current when forward biased, allowing it to efficiently convert AC to DC.

Detailed Application Field Plans

Power Supplies

Used in power supply circuits to convert AC input to DC output.

Signal Demodulation

Applied in radio and communication circuits to extract the original signal from modulated carrier waves.

Voltage Regulation

Utilized in voltage regulation circuits to maintain a stable DC output.

Detailed and Complete Alternative Models

  • 1N914B
  • 1N4148
  • 1N4001

In conclusion, the 1N961BTR diode is a crucial component in electronic circuits, providing efficient rectification and signal demodulation capabilities. Its compact size and fast switching speed make it suitable for various applications, although its limitations in maximum reverse voltage and forward current should be considered when selecting alternative models for specific requirements.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi 1N961BTR dalam penyelesaian teknikal

  1. What is the 1N961BTR diode used for?

    • The 1N961BTR diode is commonly used for general-purpose applications such as signal rectification, detection, and clamping.

  2. What are the key electrical characteristics of the 1N961BTR?

    • The 1N961BTR diode typically has a forward voltage drop of around 0.7V at a forward current of 10mA and a reverse leakage current of less than 5µA at its rated voltage.

  3. Can the 1N961BTR be used in high-frequency applications?

    • The 1N961BTR is not recommended for high-frequency applications due to its relatively slow switching speed.

  4. What is the maximum reverse voltage rating of the 1N961BTR?

    • The 1N961BTR has a maximum reverse voltage rating of 75V, making it suitable for low to moderate voltage applications.

  5. Is the 1N961BTR suitable for use in temperature-sensitive environments?

    • The 1N961BTR has a wide operating temperature range and can be used in temperature-sensitive environments within its specified limits.

  6. What are some typical circuit configurations where the 1N961BTR is used?

    • The 1N961BTR is commonly used in simple rectifier circuits, voltage clamping circuits, and signal detection circuits.

  7. Does the 1N961BTR require any special heat sinking or thermal considerations?

    • For most standard applications, the 1N961BTR does not require special heat sinking or thermal considerations due to its low power dissipation.

  8. Are there any notable failure modes or reliability concerns with the 1N961BTR?

    • The 1N961BTR is generally reliable when operated within its specified parameters, but like all electronic components, it may fail if subjected to excessive voltage or current stress.

  9. Can the 1N961BTR be used in automotive or industrial applications?

    • The 1N961BTR can be used in certain automotive and industrial applications where its electrical characteristics and operating conditions are compatible with the requirements of the specific application.

  10. Where can I find detailed specifications and application notes for the 1N961BTR?

    • Detailed specifications and application notes for the 1N961BTR can be found in the manufacturer's datasheet and application notes, which are available from the manufacturer's website or authorized distributors.