ON Semiconductor
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
74ACT715RPC
Lihat Butiran Helaian data

74ACT715RPC

Product Overview

Category:

The 74ACT715RPC belongs to the category of integrated circuits.

Use:

This product is commonly used in digital electronic applications for signal processing and control.

Characteristics:

  • High-speed operation
  • Low power consumption
  • Compatibility with TTL input levels
  • Wide operating voltage range

Package:

The 74ACT715RPC is typically available in a 20-pin plastic dual in-line package (PDIP).

Essence:

This integrated circuit serves as a versatile component in digital systems, providing essential signal processing and control functions.

Packaging/Quantity:

The 74ACT715RPC is usually packaged in tubes or trays, with quantities varying based on manufacturer specifications.

Specifications

  • Operating Voltage Range: 4.5V to 5.5V
  • Input Voltage: 0V to 5.5V
  • Operating Temperature Range: -40°C to 85°C
  • Output Drive Capability: 24mA at 5V
  • Propagation Delay: 6ns (max) at 5V

Detailed Pin Configuration

The 74ACT715RPC features a 20-pin configuration, with pins designated for power supply, ground, input, and output connections. The pinout diagram provides a clear illustration of the specific pin assignments and their corresponding functions.

Functional Features

  • Bidirectional level shifter
  • Non-inverting buffer
  • High-speed operation
  • ESD protection on all inputs and outputs

Advantages and Disadvantages

Advantages

  • High-speed performance
  • Low power consumption
  • Wide operating voltage range
  • ESD protection for enhanced reliability

Disadvantages

  • Limited output drive capability compared to some alternative models
  • Higher cost compared to standard logic gates

Working Principles

The 74ACT715RPC operates by receiving digital input signals and performing level shifting and buffering functions to ensure proper signal integrity and compatibility with different logic levels. Its internal circuitry facilitates bidirectional data transfer while maintaining high-speed operation and low power consumption.

Detailed Application Field Plans

The 74ACT715RPC finds extensive use in various digital systems, including: - Microcontroller interfacing - Data communication interfaces - Signal level translation - Control systems

Detailed and Complete Alternative Models

Some alternative models to the 74ACT715RPC include: - 74HC715 - 74HCT715 - 74FCT715 - SN74LVC1T45

These alternatives offer similar functionality with variations in speed, power consumption, and input/output characteristics, catering to diverse application requirements.

In conclusion, the 74ACT715RPC stands as a reliable and efficient integrated circuit, serving as a crucial component in digital electronic systems, offering high-speed operation, low power consumption, and versatile signal processing capabilities.

[Word Count: 410]

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi 74ACT715RPC dalam penyelesaian teknikal

Sure, here are 10 common questions and answers related to the application of 74ACT715RPC:

  1. What is the 74ACT715RPC?

    • The 74ACT715RPC is a high-speed CMOS octal buffer/line driver with 3-state outputs.

  2. What is the operating voltage range of 74ACT715RPC?

    • The operating voltage range is typically 4.5V to 5.5V.

  3. What is the maximum output current of 74ACT715RPC?

    • The maximum output current is typically ±24mA.

  4. What is the typical propagation delay of 74ACT715RPC?

    • The typical propagation delay is 4.5ns.

  5. What are the typical applications of 74ACT715RPC?

    • It is commonly used in bus interface, register file, and memory chip select address drivers.

  6. What is the maximum operating frequency of 74ACT715RPC?

    • The maximum operating frequency is typically 200MHz.

  7. Does 74ACT715RPC have internal pull-up or pull-down resistors?

    • No, it does not have internal pull-up or pull-down resistors.

  8. Is 74ACT715RPC compatible with TTL input levels?

    • Yes, it is compatible with TTL input levels.

  9. What is the package type of 74ACT715RPC?

    • It is available in a 20-pin SSOP (Shrink Small Outline Package) package.

  10. What are the recommended operating conditions for 74ACT715RPC?

    • The recommended operating temperature range is -40°C to 85°C, and the recommended storage temperature range is -65°C to 150°C.

These questions and answers should provide a good overview of the key aspects of the 74ACT715RPC for technical solutions.