ON Semiconductor
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
74LVT374WM
Lihat Butiran Helaian data

Encyclopedia Entry: 74LVT374WM

Product Overview

Category

The 74LVT374WM belongs to the category of integrated circuits (ICs), specifically a type of flip-flop latch.

Use

This IC is commonly used in digital electronic systems for data storage and transfer. It serves as a transparent latch with eight D-type flip-flops, allowing for efficient data manipulation.

Characteristics

  • High-speed operation: The 74LVT374WM operates at a high clock frequency, enabling rapid data processing.
  • Low power consumption: This IC is designed to minimize power usage, making it suitable for battery-powered devices.
  • Wide voltage range: It can operate within a broad voltage range, providing flexibility in various applications.
  • Compatibility: The 74LVT374WM is compatible with both TTL and CMOS logic levels, ensuring seamless integration into different systems.

Package and Quantity

The 74LVT374WM is available in a small-outline integrated circuit (SOIC) package. Each package contains one IC.

Specifications

  • Supply Voltage Range: 2.7V to 3.6V
  • High-Level Input Voltage: 2.0V (minimum), 3.85V (maximum)
  • Low-Level Input Voltage: -0.3V (minimum), 0.8V (maximum)
  • High-Level Output Voltage: 2.4V (minimum), VCC (maximum)
  • Low-Level Output Voltage: 0V (minimum), 0.4V (maximum)
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

The 74LVT374WM features a 20-pin configuration, as follows:

┌───┬───┐ OE ─┤1 20├─ VCC D0-Q0 ─┤2 19├─ D7-Q7 D1-Q1 ─┤3 18├─ GND D2-Q2 ─┤4 17├─ CLK D3-Q3 ─┤5 16├─ MR D4-Q4 ─┤6 15├─ Q7 D5-Q5 ─┤7 14├─ Q6 D6-Q6 ─┤8 13├─ Q5 GND ─┤9 12├─ Q4 └───┴───┘

Functional Features

The 74LVT374WM offers the following functional features:

  • Transparent Latch: The IC allows data to pass through when the output enable (OE) pin is active.
  • Eight Flip-Flops: It contains eight D-type flip-flops, providing storage for multiple data inputs.
  • Clock Input: The CLK pin controls the timing of data transfer within the IC.
  • Master Reset: The MR pin resets all flip-flops to their initial state when activated.

Advantages and Disadvantages

Advantages

  • High-speed operation enables efficient data processing.
  • Low power consumption makes it suitable for battery-powered devices.
  • Wide voltage range allows for versatile applications.
  • Compatibility with TTL and CMOS logic levels ensures seamless integration.

Disadvantages

  • Limited number of flip-flops may restrict its use in complex systems requiring more storage capacity.
  • Lack of built-in error detection or correction mechanisms.

Working Principles

The 74LVT374WM operates based on the principles of digital electronics. When the OE pin is active, data from the input pins (D0-D7) passes through to the corresponding output pins (Q0-Q7). The CLK pin controls the timing of data transfer, while the MR pin resets all flip-flops when activated.

Application Field Plans

The 74LVT374WM finds applications in various digital electronic systems, including but not limited to: - Microcontrollers - Data storage devices - Communication equipment - Industrial automation systems - Consumer electronics

Alternative Models

Alternative models that offer similar functionality to the 74LVT374WM include: - 74HC374: A CMOS logic IC with eight D-type flip-flops. - SN74LS374: A TTL logic IC featuring eight transparent latch flip-flops. - CD4013B: A dual D-type flip-flop IC with complementary outputs.

These alternative models can be considered based on specific project requirements and compatibility with existing systems.

In conclusion, the 74LVT374WM is a versatile integrated circuit used for data storage and transfer in digital electronic systems. Its high-speed operation, low power consumption, and wide voltage range make it suitable for various applications. However, its limited number of flip-flops and

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi 74LVT374WM dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of 74LVT374WM in technical solutions:

  1. Q: What is the 74LVT374WM? A: The 74LVT374WM is a type of octal D-type flip-flop with 3-state outputs, commonly used in digital circuits.

  2. Q: What is the purpose of the 74LVT374WM? A: The 74LVT374WM is used for storing and transferring data in digital systems. It can be used as a buffer or latch.

  3. Q: What voltage levels does the 74LVT374WM support? A: The 74LVT374WM supports both TTL (Transistor-Transistor Logic) and CMOS (Complementary Metal-Oxide-Semiconductor) voltage levels.

  4. Q: How many inputs and outputs does the 74LVT374WM have? A: The 74LVT374WM has 8 inputs and 8 outputs, making it suitable for applications requiring multiple data lines.

  5. Q: Can the 74LVT374WM handle high-speed data transfers? A: Yes, the 74LVT374WM is designed to operate at high speeds, making it suitable for applications that require fast data transfer rates.

  6. Q: Does the 74LVT374WM have any special features? A: Yes, the 74LVT374WM has 3-state outputs, which means it can be set to a high-impedance state, allowing multiple devices to share a bus.

  7. Q: What is the power supply voltage range for the 74LVT374WM? A: The 74LVT374WM typically operates with a power supply voltage range of 2.7V to 3.6V.

  8. Q: Can the 74LVT374WM be cascaded with other flip-flops? A: Yes, multiple 74LVT374WM flip-flops can be cascaded together to increase the number of data bits that can be stored or transferred.

  9. Q: What is the maximum operating frequency of the 74LVT374WM? A: The maximum operating frequency of the 74LVT374WM depends on various factors but is typically in the range of several hundred megahertz.

  10. Q: Are there any recommended applications for the 74LVT374WM? A: The 74LVT374WM is commonly used in microprocessors, memory systems, and other digital systems where data storage and transfer are required.

Please note that these answers are general and may vary depending on specific datasheet specifications and application requirements.