ON Semiconductor
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
74LVTH2245MTC
Lihat Butiran Helaian data

74LVTH2245MTC

Product Overview

Category

The 74LVTH2245MTC belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used for signal level translation and buffering in various electronic devices.

Characteristics

  • Voltage Level Translation: The 74LVTH2245MTC is designed to translate signals between different voltage levels, making it suitable for interfacing between devices operating at different voltage levels.
  • High-Speed Operation: This IC offers high-speed operation, allowing for efficient signal transmission and processing.
  • Bidirectional Communication: The 74LVTH2245MTC supports bidirectional data transfer, enabling communication in both directions.
  • Low Power Consumption: This IC is designed to consume low power, making it energy-efficient.

Package

The 74LVTH2245MTC is available in a small outline package (SOIC) with 20 pins.

Essence

The essence of the 74LVTH2245MTC lies in its ability to facilitate voltage level translation and buffering, ensuring seamless communication between devices operating at different voltage levels.

Packaging/Quantity

The 74LVTH2245MTC is typically packaged in reels or tubes, with each reel or tube containing a specific quantity of ICs. The exact packaging and quantity may vary depending on the manufacturer.

Specifications

  • Supply Voltage Range: 2.0V to 5.5V
  • Input Voltage Range: GND to VCC
  • Output Voltage Range: GND to VCC
  • Maximum Operating Frequency: X MHz
  • Number of Channels: 8
  • Input/Output Type: Tri-State

Detailed Pin Configuration

The 74LVTH2245MTC has a total of 20 pins, which are assigned specific functions as follows:

  1. Pin 1: Channel 1 Data I/O
  2. Pin 2: Channel 1 Output Enable (OE)
  3. Pin 3: Channel 1 Direction Control (DIR)
  4. Pin 4: Ground (GND)
  5. Pin 5: Channel 2 Data I/O
  6. Pin 6: Channel 2 Output Enable (OE)
  7. Pin 7: Channel 2 Direction Control (DIR)
  8. Pin 8: VCC
  9. Pin 9: Channel 3 Data I/O
  10. Pin 10: Channel 3 Output Enable (OE)
  11. Pin 11: Channel 3 Direction Control (DIR)
  12. Pin 12: Channel 4 Data I/O
  13. Pin 13: Channel 4 Output Enable (OE)
  14. Pin 14: Channel 4 Direction Control (DIR)
  15. Pin 15: Channel 5 Data I/O
  16. Pin 16: Channel 5 Output Enable (OE)
  17. Pin 17: Channel 5 Direction Control (DIR)
  18. Pin 18: Channel 6 Data I/O
  19. Pin 19: Channel 6 Output Enable (OE)
  20. Pin 20: Channel 6 Direction Control (DIR)

Functional Features

  • Bidirectional Data Transfer: The 74LVTH2245MTC allows data to be transferred bidirectionally between different voltage domains.
  • Tri-State Outputs: The IC features tri-state outputs, enabling the user to disable the output drivers when necessary.
  • Direction Control: The direction control pins (DIR) determine the direction of data flow, allowing for flexible communication.

Advantages and Disadvantages

Advantages

  • Efficient Voltage Level Translation: The 74LVTH2245MTC ensures reliable signal translation between devices operating at different voltage levels.
  • High-Speed Operation: This IC offers fast data transmission, enhancing overall system performance.
  • Low Power Consumption: The IC is designed to consume minimal power, contributing to energy efficiency.

Disadvantages

  • Limited Channel Count: The 74LVTH2245MTC provides a maximum of 6 channels, which may be insufficient for certain applications requiring more channels.
  • Sensitivity to Voltage Fluctuations: This IC may exhibit sensitivity to voltage fluctuations, necessitating careful power supply design.

Working Principles

The 74LVTH2245MTC operates based on the principles of voltage level translation and buffering. It receives input signals from one voltage domain, translates them to the desired voltage level, and outputs them to another voltage domain. The direction control pins (DIR) determine the direction of data flow, while the output enable pins (OE) allow for tri-state operation, enabling the user to disable the output drivers when required.

Detailed Application Field Plans

The 74LVTH2245MTC finds application in various fields where voltage level translation and buffering are necessary. Some potential application areas include:

  1. Microcontroller Interfacing: The IC can be used to interface microcontrollers operating at different voltage levels

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi 74LVTH2245MTC dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of 74LVTH2245MTC in technical solutions:

  1. Q: What is the function of the 74LVTH2245MTC? A: The 74LVTH2245MTC is an octal bus transceiver with 3-state outputs, used for bidirectional data transfer between different voltage levels.

  2. Q: What is the operating voltage range of the 74LVTH2245MTC? A: The 74LVTH2245MTC operates within a voltage range of 1.65V to 5.5V.

  3. Q: Can the 74LVTH2245MTC be used for level shifting between different logic families? A: Yes, the 74LVTH2245MTC can be used for level shifting between different logic families, as it supports both TTL and CMOS voltage levels.

  4. Q: How many bidirectional channels does the 74LVTH2245MTC have? A: The 74LVTH2245MTC has 8 bidirectional channels, allowing for simultaneous data transfer in both directions.

  5. Q: What is the maximum data transfer rate supported by the 74LVTH2245MTC? A: The 74LVTH2245MTC supports a maximum data transfer rate of 400Mbps.

  6. Q: Can the 74LVTH2245MTC handle high-speed signals? A: Yes, the 74LVTH2245MTC is designed to handle high-speed signals and has a propagation delay of only a few nanoseconds.

  7. Q: Does the 74LVTH2245MTC have built-in ESD protection? A: Yes, the 74LVTH2245MTC has built-in ESD protection, making it more robust against electrostatic discharge.

  8. Q: Can the 74LVTH2245MTC be used in both parallel and serial communication applications? A: Yes, the 74LVTH2245MTC can be used in both parallel and serial communication applications, depending on the specific requirements.

  9. Q: What is the power supply voltage required for the 74LVTH2245MTC? A: The 74LVTH2245MTC requires a power supply voltage of 2.7V to 3.6V.

  10. Q: Is the 74LVTH2245MTC available in different package options? A: Yes, the 74LVTH2245MTC is available in various package options, including TSSOP, SOIC, and SSOP, providing flexibility for different PCB layouts and designs.

Please note that these answers are general and may vary based on specific datasheet specifications and application requirements.