ON Semiconductor
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
74VHC4316MTC
Lihat Butiran Helaian data

Encyclopedia Entry: 74VHC4316MTC

Product Overview

Category

The 74VHC4316MTC belongs to the category of integrated circuits (ICs) and specifically falls under the family of analog switches/multiplexers.

Use

This product is primarily used for signal routing and switching applications in electronic circuits. It allows multiple input signals to be selectively connected to an output, enabling efficient control over signal flow.

Characteristics

  • High-speed operation: The 74VHC4316MTC offers fast switching times, making it suitable for time-critical applications.
  • Low power consumption: This IC is designed to minimize power consumption, ensuring energy efficiency in electronic systems.
  • Wide voltage range: It can operate within a wide voltage range, typically between 2V and 5.5V, providing flexibility in various circuit designs.
  • High noise immunity: The 74VHC4316MTC exhibits excellent noise immunity, reducing the impact of external interference on signal integrity.

Package

The 74VHC4316MTC is available in a small-sized Thin Shrink Small Outline Package (TSSOP). This package type ensures space-saving integration into compact electronic devices.

Essence

The essence of the 74VHC4316MTC lies in its ability to efficiently route and switch analog signals, facilitating versatile signal management in electronic circuits.

Packaging/Quantity

This product is typically sold in reels or tubes containing a specified quantity of ICs. The exact packaging and quantity may vary depending on the supplier.

Specifications

  • Supply Voltage Range: 2V to 5.5V
  • Number of Channels: 4
  • On-State Resistance: 70 Ohms (typical)
  • Input/Output Capacitance: 5pF (typical)
  • Operating Temperature Range: -40°C to +85°C
  • Package Type: TSSOP-16

Detailed Pin Configuration

The 74VHC4316MTC features a TSSOP-16 package with the following pin configuration:

__ __ A1 -| 1 16 |- VCC A2 -| 2 15 |- S1 B1 -| 3 14 |- D1 B2 -| 4 13 |- S2 C1 -| 5 12 |- D2 C2 -| 6 11 |- S3 GND -| 7 10 |- D3 D1 -| 8 9 |- S4 ¯¯ ¯¯

Functional Features

  • Quad bilateral switch/multiplexer: The 74VHC4316MTC integrates four independent analog switches, allowing for simultaneous or sequential signal routing.
  • Low "ON" resistance: With a typical on-state resistance of 70 Ohms, this IC minimizes signal attenuation and distortion during switching operations.
  • Break-before-make switching: The device ensures a brief disconnection between input and output signals during switching, preventing signal overlap and potential damage to connected components.
  • Wide voltage compatibility: The 74VHC4316MTC supports both digital and analog signals within the specified voltage range, making it suitable for various applications.

Advantages and Disadvantages

Advantages

  • Fast switching times enable efficient signal routing in time-critical applications.
  • Low power consumption contributes to energy-efficient circuit designs.
  • Excellent noise immunity ensures reliable signal integrity even in noisy environments.
  • Compact package size allows for space-saving integration into electronic devices.

Disadvantages

  • Limited number of channels (4) may not be sufficient for complex signal routing requirements.
  • On-state resistance (70 Ohms) may introduce some signal attenuation, particularly in high-frequency applications.

Working Principles

The 74VHC4316MTC operates based on the principle of field-effect transistors (FETs). Each switch within the IC consists of a pair of FETs that control the connection between input and output terminals. When the control signal is applied to the corresponding switch, the FETs either allow or block the flow of signals, effectively routing or isolating them as required.

Detailed Application Field Plans

The 74VHC4316MTC finds application in various electronic systems, including but not limited to: 1. Audio/Video Signal Routing: It can be used to switch audio or video signals between different sources or destinations. 2. Data Acquisition Systems: The IC facilitates multiplexing of analog sensor signals for data acquisition purposes. 3. Communication Systems: It enables switching between different communication channels or interfaces. 4. Test and Measurement Equipment: The IC assists in signal routing during testing and measurement operations.

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to the 74V

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi 74VHC4316MTC dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of 74VHC4316MTC in technical solutions:

  1. Q: What is the 74VHC4316MTC? A: The 74VHC4316MTC is a quad bilateral switch IC that can be used for analog or digital signal switching applications.

  2. Q: What is the operating voltage range of the 74VHC4316MTC? A: The operating voltage range of the 74VHC4316MTC is typically between 2V and 5.5V.

  3. Q: How many channels does the 74VHC4316MTC have? A: The 74VHC4316MTC has four independent channels, allowing for the simultaneous control of four different signals.

  4. Q: Can the 74VHC4316MTC handle both analog and digital signals? A: Yes, the 74VHC4316MTC is designed to handle both analog and digital signals, making it versatile for various applications.

  5. Q: What is the maximum current rating of the 74VHC4316MTC? A: The maximum current rating per channel of the 74VHC4316MTC is typically around 25mA.

  6. Q: Does the 74VHC4316MTC have built-in protection features? A: No, the 74VHC4316MTC does not have built-in protection features. External protection circuitry may be required depending on the application.

  7. Q: Can the 74VHC4316MTC be used for audio signal routing? A: Yes, the 74VHC4316MTC can be used for audio signal routing as it can handle analog signals with good fidelity.

  8. Q: What is the typical on-resistance of the 74VHC4316MTC? A: The typical on-resistance of the 74VHC4316MTC is around 100 ohms, which is relatively low for most applications.

  9. Q: Can the 74VHC4316MTC be used in battery-powered devices? A: Yes, the 74VHC4316MTC can be used in battery-powered devices as it operates within a wide voltage range and has low power consumption.

  10. Q: Are there any specific application notes or reference designs available for the 74VHC4316MTC? A: Yes, the manufacturer of the 74VHC4316MTC typically provides application notes and reference designs that can help users implement the IC effectively in their technical solutions.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's documentation for the 74VHC4316MTC.