ON Semiconductor
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
BD675
Lihat Butiran Helaian data

BD675 Transistor

Product Overview

Category

The BD675 transistor belongs to the category of power transistors.

Use

It is commonly used for amplification and switching applications in electronic circuits.

Characteristics

  • High current capability
  • Low saturation voltage
  • Complementary PNP type
  • Suitable for audio amplifiers, power supplies, and motor control circuits

Package

The BD675 transistor is typically available in a TO-126 package.

Essence

This transistor is essential for power management and amplification in various electronic devices.

Packaging/Quantity

It is usually packaged in reels or tubes and is available in varying quantities depending on the supplier.

Specifications

  • Collector-Base Voltage (VCBO): 45V
  • Collector-Emitter Voltage (VCEO): 45V
  • Emitter-Base Voltage (VEBO): 5V
  • Collector Current (IC): 4A
  • Power Dissipation (PD): 36W
  • Transition Frequency (FT): 3MHz
  • Operating Temperature: -65°C to 150°C

Detailed Pin Configuration

The BD675 transistor has three pins: 1. Collector (C) 2. Base (B) 3. Emitter (E)

Functional Features

  • High current gain
  • Low noise
  • Fast switching speed
  • Good thermal stability

Advantages

  • High current capability
  • Low saturation voltage
  • Complementary PNP type allows for versatile circuit design

Disadvantages

  • Limited frequency response compared to some other transistors
  • Sensitive to temperature variations

Working Principles

The BD675 operates based on the principles of bipolar junction transistors, where the flow of current between the collector and emitter is controlled by the base current.

Detailed Application Field Plans

The BD675 transistor finds extensive use in the following applications: - Audio amplifiers - Power supplies - Motor control circuits - Voltage regulators

Detailed and Complete Alternative Models

Some alternative models to the BD675 transistor include: - TIP31C - 2N3055 - MJ2955 - TIP32C

In conclusion, the BD675 transistor is a versatile component with high current capability and low saturation voltage, making it suitable for various amplification and power management applications in electronic circuits.

[Word Count: 314]

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi BD675 dalam penyelesaian teknikal

  1. What is the BD675 transistor used for?

    • The BD675 is a PNP power transistor commonly used in audio amplifiers, voltage regulators, and power supply circuits.

  2. What are the key specifications of the BD675 transistor?

    • The BD675 has a maximum collector current of 4A, a collector-emitter voltage of 45V, and a power dissipation of 36W.

  3. Can the BD675 be used as a switch?

    • Yes, the BD675 can be used as a high-power switch in applications such as motor control and relay driving.

  4. How do I connect the BD675 in a typical amplifier circuit?

    • In an amplifier circuit, the BD675 is usually connected as a common-emitter configuration with appropriate biasing and input/output coupling components.

  5. What are the typical operating conditions for the BD675?

    • The BD675 is typically operated at a collector current of 1-2A, a collector-emitter voltage of 20-30V, and within a temperature range of -65°C to 150°C.

  6. Is a heat sink required for the BD675 in high-power applications?

    • Yes, a heat sink is recommended for the BD675 when operating at high currents or power levels to ensure proper thermal management.

  7. Can the BD675 be used in linear voltage regulator circuits?

    • Yes, the BD675 can be used in linear voltage regulator circuits to provide stable output voltage regulation.

  8. What are the typical failure modes of the BD675 transistor?

    • Common failure modes include thermal runaway due to inadequate heat sinking, overcurrent leading to device breakdown, and voltage spikes causing damage to the transistor.

  9. Are there any alternative transistors that can be used in place of the BD675?

    • Alternatives to the BD675 include transistors with similar specifications such as TIP31, TIP32, and 2N6045.

  10. Where can I find detailed application notes for using the BD675 in technical solutions?

    • Detailed application notes for the BD675 can be found in the manufacturer's datasheet, application guides, and technical reference manuals available from semiconductor component suppliers.