ON Semiconductor
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
CAT5112VI-10-T3
Lihat Butiran Helaian data

CAT5112VI-10-T3

Product Overview

Category

CAT5112VI-10-T3 belongs to the category of electronic components.

Use

This product is commonly used in various electronic devices and circuits for voltage regulation and control.

Characteristics

  • Voltage range: 0V to 5V
  • Resolution: 10-bit
  • Package type: SOT-23
  • Operating temperature range: -40°C to +85°C
  • Supply voltage: 2.7V to 5.5V

Package and Quantity

The CAT5112VI-10-T3 is typically packaged in a SOT-23 package. It is available in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Resolution: 10-bit
  • Number of channels: 1
  • Supply voltage range: 2.7V to 5.5V
  • Temperature coefficient: ±50ppm/°C
  • Non-volatile memory: Yes
  • I2C interface: Yes
  • Power-on reset: Yes
  • Standby current: 1μA (typical)

Pin Configuration

The CAT5112VI-10-T3 has a total of 6 pins:

  1. VCC: Supply voltage input
  2. GND: Ground reference
  3. SDA: Serial data input/output for I2C communication
  4. SCL: Serial clock input for I2C communication
  5. A0: Address selection bit 0
  6. W: Write protection input

Functional Features

  • Digital potentiometer: The CAT5112VI-10-T3 acts as a digitally controlled variable resistor, allowing precise voltage control.
  • Non-volatile memory: The device retains its settings even after power is removed, ensuring consistent performance upon power-up.
  • I2C interface: The CAT5112VI-10-T3 can be easily controlled and programmed using the I2C communication protocol.
  • Power-on reset: The device automatically resets to a default state upon power-up, ensuring predictable behavior.

Advantages and Disadvantages

Advantages

  • High resolution allows for precise voltage control.
  • Non-volatile memory ensures settings are retained even after power loss.
  • Compact SOT-23 package enables space-saving integration into electronic circuits.
  • Wide operating temperature range makes it suitable for various environments.

Disadvantages

  • Limited number of channels (1 channel).
  • Temperature coefficient may introduce slight variations in output voltage with temperature changes.

Working Principles

The CAT5112VI-10-T3 is based on the principle of digital potentiometry. It consists of a series of resistive elements connected in a ladder-like configuration. By digitally controlling the resistance values, the desired voltage can be achieved at the output pin. The I2C interface allows for easy programming and adjustment of the resistance values.

Application Field Plans

The CAT5112VI-10-T3 finds applications in various fields, including: - Audio equipment: Volume control, tone adjustment - Display devices: Brightness control - Power supplies: Voltage regulation - Industrial automation: Analog signal conditioning

Alternative Models

  • CAT5112ZI-10-T3: Similar specifications, but with an extended temperature range (-40°C to +125°C).
  • CAT5112YI-10-T3: Similar specifications, but with a different package type (SOT-89).

These alternative models provide similar functionality and can be used as substitutes for the CAT5112VI-10-T3 in specific applications.

Word count: 457 words

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi CAT5112VI-10-T3 dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of CAT5112VI-10-T3 in technical solutions:

  1. Question: What is CAT5112VI-10-T3?
    Answer: CAT5112VI-10-T3 is a specific model of digital potentiometer manufactured by ON Semiconductor.

  2. Question: What is the purpose of a digital potentiometer like CAT5112VI-10-T3?
    Answer: A digital potentiometer is used to digitally control resistance in electronic circuits, replacing traditional mechanical potentiometers.

  3. Question: What is the maximum resistance range of CAT5112VI-10-T3?
    Answer: CAT5112VI-10-T3 has a maximum resistance range of 10 kilohms (kΩ).

  4. Question: How many taps or steps does CAT5112VI-10-T3 have?
    Answer: CAT5112VI-10-T3 has 256 taps or steps, allowing for precise resistance adjustment.

  5. Question: What is the supply voltage range for CAT5112VI-10-T3?
    Answer: The supply voltage range for CAT5112VI-10-T3 is typically between 2.7 volts (V) and 5.5 volts (V).

  6. Question: Can CAT5112VI-10-T3 be used in both analog and digital applications?
    Answer: Yes, CAT5112VI-10-T3 can be used in both analog and digital applications, providing flexibility in various circuit designs.

  7. Question: Is CAT5112VI-10-T3 compatible with standard microcontrollers?
    Answer: Yes, CAT5112VI-10-T3 is compatible with standard microcontrollers, making it easy to integrate into digital control systems.

  8. Question: Does CAT5112VI-10-T3 have non-volatile memory?
    Answer: Yes, CAT5112VI-10-T3 has non-volatile memory, allowing it to retain its settings even when power is removed.

  9. Question: Can CAT5112VI-10-T3 be used in audio applications?
    Answer: Yes, CAT5112VI-10-T3 can be used in audio applications for volume control, tone adjustment, and other audio-related functions.

  10. Question: Are there any specific precautions or considerations when using CAT5112VI-10-T3?
    Answer: It is important to ensure that the voltage supply does not exceed the specified range, and to follow the manufacturer's guidelines for proper handling and soldering of the component.