Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
FPF2174

FPF2174 - English Editing Encyclopedia Entry

Product Overview

Category: Integrated Circuit (IC)

Use: Power Management IC

Characteristics: - Low power consumption - High efficiency - Compact size - Wide input voltage range

Package: QFN (Quad Flat No-leads)

Essence: FPF2174 is a power management IC designed for efficient power distribution and control in various electronic devices.

Packaging/Quantity: The FPF2174 is available in a QFN package and is typically sold in reels of 2500 units.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.6V to VIN
  • Maximum Continuous Current: 1.5A
  • Quiescent Current: 20µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The FPF2174 features the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. PG: Power good indicator pin
  5. VOUT: Output voltage pin

Functional Features

  • Power Distribution: The FPF2174 efficiently distributes power from the input voltage source to the output load.
  • Overcurrent Protection: It incorporates overcurrent protection, safeguarding the connected devices from excessive current flow.
  • Undervoltage Lockout: The IC includes an undervoltage lockout feature that prevents operation when the input voltage falls below a certain threshold.
  • Power Good Indicator: The power good indicator pin provides a signal indicating the presence of a valid output voltage.

Advantages and Disadvantages

Advantages: - Low power consumption ensures energy efficiency. - High efficiency results in minimal power loss during operation. - Compact size allows for space-saving integration in electronic devices. - Wide input voltage range accommodates various power sources.

Disadvantages: - Limited maximum continuous current may restrict usage in high-power applications. - Operating temperature range might not be suitable for extreme environments.

Working Principles

The FPF2174 operates as a power management IC by regulating the flow of power from the input voltage source to the output load. It utilizes internal circuitry to efficiently convert and distribute power while providing protection against overcurrent conditions. The undervoltage lockout feature ensures safe operation within the specified input voltage range.

Detailed Application Field Plans

The FPF2174 finds application in various electronic devices, including but not limited to: 1. Mobile phones 2. Tablets 3. Portable media players 4. Wearable devices 5. IoT (Internet of Things) devices

Detailed and Complete Alternative Models

  1. FPF2153: Similar power management IC with a lower maximum continuous current of 1A.
  2. FPF2186: Power management IC with a higher maximum continuous current of 2A.
  3. FPF2133: Power management IC with similar characteristics but designed for lower power applications.

Note: This is not an exhaustive list of alternative models.

In conclusion, the FPF2174 is a power management IC that offers efficient power distribution, overcurrent protection, and undervoltage lockout features. Its compact size and wide input voltage range make it suitable for various electronic devices. However, its limited maximum continuous current and operating temperature range should be considered when selecting alternative models.

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi FPF2174 dalam penyelesaian teknikal

Sure! Here are 10 common questions and answers related to the application of FPF2174 in technical solutions:

  1. Q: What is FPF2174? A: FPF2174 is a power management integrated circuit (PMIC) designed for use in various technical solutions.

  2. Q: What are the key features of FPF2174? A: The key features of FPF2174 include multiple power rails, programmable current limits, fault protection, and low quiescent current.

  3. Q: In which applications can FPF2174 be used? A: FPF2174 can be used in a wide range of applications such as smartphones, tablets, portable devices, IoT devices, and other battery-powered systems.

  4. Q: How many power rails does FPF2174 support? A: FPF2174 supports up to four power rails, making it suitable for systems with multiple voltage requirements.

  5. Q: Can FPF2174 handle high currents? A: Yes, FPF2174 has programmable current limits that allow it to handle high currents based on the specific requirements of the application.

  6. Q: Does FPF2174 provide any fault protection? A: Yes, FPF2174 offers various fault protection features such as overvoltage protection, undervoltage lockout, and thermal shutdown to ensure system safety.

  7. Q: What is the quiescent current of FPF2174? A: FPF2174 has a low quiescent current, typically in the microampere range, which helps in reducing power consumption and extending battery life.

  8. Q: Is FPF2174 compatible with different battery chemistries? A: Yes, FPF2174 is designed to work with various battery chemistries, including lithium-ion (Li-ion), lithium-polymer (LiPo), and others commonly used in portable devices.

  9. Q: Can FPF2174 be controlled through a microcontroller or digital interface? A: Yes, FPF2174 can be controlled using a microcontroller or digital interface, allowing for easy integration into larger systems.

  10. Q: Are there any evaluation boards or reference designs available for FPF2174? A: Yes, the manufacturer of FPF2174 typically provides evaluation boards and reference designs to help developers quickly prototype and implement the IC in their applications.

Please note that the specific details may vary based on the manufacturer's documentation and datasheets for FPF2174.