FQPF13N50CSDTU
Product Overview
The FQPF13N50CSDTU belongs to the category of power MOSFETs and is commonly used in electronic circuits for switching and amplification purposes. This MOSFET exhibits characteristics such as high voltage capability, low on-resistance, and fast switching speed. It is typically packaged in a TO-220F package and is available in various quantities.
Specifications
- Voltage Rating: 500V
- Current Rating: 13A
- Package Type: TO-220F
- On-Resistance: 0.52Ω
- Gate Charge: 22nC
- Operating Temperature: -55°C to 150°C
Pin Configuration
The FQPF13N50CSDTU MOSFET has a standard TO-220F pin configuration with three pins: gate (G), drain (D), and source (S).
Functional Features
- High Voltage Capability
- Low On-Resistance
- Fast Switching Speed
Advantages
- Suitable for high voltage applications
- Low conduction losses
- Fast switching performance
Disadvantages
- Sensitive to static electricity
- Gate capacitance may affect high-frequency performance
Working Principles
The FQPF13N50CSDTU operates based on the principles of field-effect transistors, where the voltage applied to the gate terminal controls the flow of current between the drain and source terminals. When a sufficient voltage is applied to the gate, the MOSFET allows current to flow through it, enabling it to act as a switch or amplifier in electronic circuits.
Application Field Plans
This MOSFET is commonly used in power supply circuits, motor control, lighting systems, and audio amplifiers due to its high voltage handling capability and low on-resistance.
Alternative Models
- IRF840
- STP16NF06L
- FQP13N10
In conclusion, the FQPF13N50CSDTU power MOSFET offers high voltage capability, low on-resistance, and fast switching speed, making it suitable for various electronic applications in the power electronics domain.
Word count: 287
Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi FQPF13N50CSDTU dalam penyelesaian teknikal
What is the FQPF13N50CSDTU?
- The FQPF13N50CSDTU is a 500V N-Channel MOSFET designed for high-speed switching applications.
What are the key features of the FQPF13N50CSDTU?
- The key features include a low on-resistance, high switching speed, and a rugged design suitable for demanding applications.
What are the typical applications of the FQPF13N50CSDTU?
- Typical applications include power supplies, motor control, lighting, and other high-frequency switching circuits.
What is the maximum voltage and current rating of the FQPF13N50CSDTU?
- The FQPF13N50CSDTU has a maximum voltage rating of 500V and a continuous drain current rating of 13A.
What is the thermal resistance of the FQPF13N50CSDTU?
- The thermal resistance from junction to case (RθJC) is typically 1.25°C/W.
Does the FQPF13N50CSDTU require a heat sink in typical applications?
- Depending on the application and power dissipation, a heat sink may be required to ensure proper thermal management.
What are the recommended operating conditions for the FQPF13N50CSDTU?
- The recommended operating temperature range is -55°C to 150°C, and the gate-source voltage should not exceed ±20V.
Is the FQPF13N50CSDTU suitable for use in automotive applications?
- Yes, the FQPF13N50CSDTU is designed to meet automotive industry standards and can be used in automotive applications.
Are there any specific layout considerations when using the FQPF13N50CSDTU?
- It is important to minimize parasitic inductance in the layout and provide adequate gate drive to ensure fast and reliable switching performance.
Where can I find detailed technical specifications and application notes for the FQPF13N50CSDTU?
- Detailed technical specifications and application notes can be found in the datasheet provided by the manufacturer or on their official website.