ON Semiconductor
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
KSC2073H1TU
Lihat Butiran Helaian data

KSC2073H1TU Product Overview

Introduction

The KSC2073H1TU is a versatile semiconductor component that belongs to the category of NPN silicon epitaxial planar transistors. This product is widely used in electronic circuits for amplification and switching applications due to its unique characteristics and performance.

Basic Information Overview

  • Category: NPN Silicon Epitaxial Planar Transistor
  • Use: Amplification and Switching in Electronic Circuits
  • Characteristics: High Voltage, Low Power Dissipation, High Current Gain
  • Package: TO-92 Package
  • Essence: Semiconductor Device
  • Packaging/Quantity: Typically Packaged in Reel or Bulk Quantities

Specifications

  • Collector-Base Voltage (VCBO): 40V
  • Collector-Emitter Voltage (VCEO): 25V
  • Emitter-Base Voltage (VEBO): 6V
  • Collector Current (IC): 0.1A
  • Power Dissipation (PD): 400mW
  • Transition Frequency (fT): 150MHz
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

The KSC2073H1TU transistor has three pins: 1. Collector (C) 2. Base (B) 3. Emitter (E)

Functional Features

  • High Voltage Capability
  • Low Power Dissipation
  • High Current Gain
  • Fast Switching Speed

Advantages and Disadvantages

Advantages

  • Suitable for High Voltage Applications
  • Low Saturation Voltage
  • Wide Operating Temperature Range

Disadvantages

  • Relatively Low Collector Current Rating
  • Sensitive to Overcurrent Conditions

Working Principles

The KSC2073H1TU operates based on the principles of bipolar junction transistors, utilizing the flow of charge carriers to amplify or switch electronic signals within a circuit.

Detailed Application Field Plans

The KSC2073H1TU is commonly used in the following applications: - Audio Amplifiers - Signal Processing Circuits - Switching Circuits - Oscillator Circuits

Detailed and Complete Alternative Models

Some alternative models to the KSC2073H1TU include: - 2N3904 - BC547 - 2SC945 - PN2222A

In conclusion, the KSC2073H1TU NPN silicon epitaxial planar transistor offers high voltage capability, low power dissipation, and high current gain, making it suitable for various electronic applications.

[Word Count: 298]

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi KSC2073H1TU dalam penyelesaian teknikal

  1. What is KSC2073H1TU?

    • KSC2073H1TU is a high-performance NPN transistor commonly used in electronic circuits for amplification and switching applications.

  2. What are the key specifications of KSC2073H1TU?

    • The key specifications include a maximum collector current of 500mA, a maximum collector-base voltage of 60V, and a maximum power dissipation of 625mW.

  3. How can KSC2073H1TU be used in amplifier circuits?

    • KSC2073H1TU can be used as a small-signal amplifier in audio and other low-power applications due to its high current gain and low noise characteristics.

  4. In what types of switching applications is KSC2073H1TU commonly used?

    • KSC2073H1TU is often used in low-power switching applications such as signal switching and interface circuits.

  5. What are the typical operating conditions for KSC2073H1TU?

    • The typical operating conditions include a collector current of 100mA, a collector-emitter voltage of 20V, and a base current of 10mA.

  6. Can KSC2073H1TU be used in high-frequency applications?

    • While KSC2073H1TU has moderate frequency capabilities, it is more suitable for low to moderate frequency applications due to its transition frequency and capacitance characteristics.

  7. What are the recommended thermal considerations for KSC2073H1TU?

    • It is important to ensure proper heat sinking and thermal management to keep the junction temperature within safe limits, especially when operating at higher power levels.

  8. Are there any common alternative transistors to KSC2073H1TU?

    • Yes, some common alternatives include 2N3904, BC547, and 2SC945, which have similar characteristics and can be used as substitutes in many applications.

  9. What are the typical circuit configurations for using KSC2073H1TU?

    • Common circuit configurations include common emitter, common collector, and emitter follower configurations, depending on the specific application requirements.

  10. Where can I find detailed application notes and reference designs for using KSC2073H1TU in technical solutions?

    • Detailed application notes and reference designs can often be found in the manufacturer's datasheets, application guides, and technical support resources. Additionally, online electronics forums and communities may provide valuable insights and practical examples of using KSC2073H1TU in various technical solutions.