ON Semiconductor
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
MBR4045PTG
Lihat Butiran Helaian data

MBR4045PTG

Product Overview

The MBR4045PTG belongs to the category of Schottky Barrier Rectifiers and is commonly used in power supply applications. These rectifiers are known for their high efficiency, low forward voltage drop, and fast switching capabilities. The package typically consists of a TO-220AB or D2PAK form factor and contains essential information such as the part number, manufacturer logo, and other relevant markings. The essence of the MBR4045PTG lies in its ability to efficiently convert alternating current (AC) to direct current (DC) with minimal power loss. Each package usually contains a specific quantity of rectifiers, depending on the manufacturer's specifications.

Specifications

  • Forward Voltage Drop: 0.45V
  • Reverse Voltage: 45V
  • Average Rectified Current: 40A
  • Package Type: TO-220AB/D2PAK
  • Quantity per Package: Varies by Manufacturer

Detailed Pin Configuration

The MBR4045PTG typically features three pins: 1. Anode 2. Cathode 3. Thermal Pad (for heat dissipation)

Functional Features

  • High Efficiency
  • Fast Switching
  • Low Forward Voltage Drop
  • Excellent Thermal Performance

Advantages and Disadvantages

Advantages

  • High Efficiency
  • Fast Switching Speed
  • Low Power Loss
  • Good Thermal Conductivity

Disadvantages

  • Higher Cost Compared to Standard Rectifiers
  • Sensitive to Overvoltage Conditions

Working Principles

The MBR4045PTG operates based on the principles of Schottky barrier rectification. When a forward voltage is applied, the rectifier allows current to flow with minimal resistance due to the low forward voltage drop. This results in efficient conversion of AC to DC, making it suitable for various power supply applications.

Detailed Application Field Plans

The MBR4045PTG finds extensive use in the following applications: - Switching Power Supplies - DC-DC Converters - Solar Panel Systems - Battery Charging Circuits

Detailed and Complete Alternative Models

Some alternative models to the MBR4045PTG include: - MBR2045PTG - MBR3045PTG - MBR4045PT - MBR4045PTG-1

In conclusion, the MBR4045PTG Schottky Barrier Rectifier offers high efficiency and fast switching capabilities, making it an ideal choice for power supply applications where minimizing power loss is crucial.

[Word Count: 345]

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi MBR4045PTG dalam penyelesaian teknikal

  1. What is MBR4045PTG?

    • MBR4045PTG is a high-performance Schottky barrier rectifier diode designed for use in power supplies, converters, and other applications requiring high efficiency and low forward voltage drop.

  2. What are the key features of MBR4045PTG?

    • The key features of MBR4045PTG include a low forward voltage drop, high current capability, high surge capacity, and a compact TO-220AB package.

  3. What are the typical applications of MBR4045PTG?

    • MBR4045PTG is commonly used in switch-mode power supplies, freewheeling diodes, OR-ing diodes, and other applications where high efficiency and fast switching are required.

  4. What is the maximum forward voltage drop of MBR4045PTG?

    • The maximum forward voltage drop of MBR4045PTG is typically around 0.55V at a forward current of 20A.

  5. What is the maximum reverse voltage rating of MBR4045PTG?

    • The maximum reverse voltage rating of MBR4045PTG is 45V.

  6. Does MBR4045PTG require a heatsink for operation?

    • Depending on the application and operating conditions, MBR4045PTG may require a heatsink to dissipate heat effectively.

  7. Can MBR4045PTG be used in parallel for higher current applications?

    • Yes, MBR4045PTG can be used in parallel to increase the current-handling capability in high-power applications.

  8. What are the storage and operating temperature ranges for MBR4045PTG?

    • The storage temperature range for MBR4045PTG is -65°C to 175°C, while the operating temperature range is -55°C to 150°C.

  9. Is MBR4045PTG RoHS compliant?

    • Yes, MBR4045PTG is RoHS compliant, making it suitable for use in environmentally sensitive applications.

  10. Where can I find detailed technical specifications and application notes for MBR4045PTG?

    • Detailed technical specifications and application notes for MBR4045PTG can be found in the product datasheet provided by the manufacturer or distributor.