ON Semiconductor
Imej mungkin representasi.
Lihat spesifikasi untuk butiran produk.
MBRB2535CTL
Lihat Butiran Helaian data

MBRB2535CTL

Introduction

The MBRB2535CTL is a diode belonging to the category of Schottky Barrier Rectifiers. This entry provides an overview of its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Basic Information Overview

  • Category: Schottky Barrier Rectifiers
  • Use: The MBRB2535CTL is commonly used in power supply applications, voltage clamping, reverse polarity protection, and freewheeling diodes.
  • Characteristics: It exhibits low forward voltage drop, high switching speed, and low leakage current.
  • Package: TO-263AB (D2PAK)
  • Essence: The diode is designed for high-efficiency power conversion and voltage regulation.
  • Packaging/Quantity: Typically packaged in reels or tubes with varying quantities based on manufacturer specifications.

Specifications

  • Voltage Rating: 35V
  • Current Rating: 25A
  • Forward Voltage Drop: Typically around 0.55V at 12.5A
  • Reverse Leakage Current: Maximum of 500µA at 35V
  • Operating Temperature Range: -65°C to +175°C

Detailed Pin Configuration

The MBRB2535CTL typically has three pins: 1. Anode 2. Cathode 3. Thermal pad (connected to the package)

Functional Features

  • Low forward voltage drop ensures minimal power dissipation.
  • High switching speed allows for efficient operation in high-frequency circuits.
  • Low leakage current minimizes power loss in reverse bias conditions.

Advantages and Disadvantages

Advantages

  • High efficiency due to low forward voltage drop.
  • Fast switching speed enables rapid response in power supply applications.
  • Low leakage current reduces power loss in reverse bias conditions.

Disadvantages

  • Higher cost compared to standard rectifier diodes.
  • Limited voltage and current ratings compared to some other rectifier diodes.

Working Principles

The MBRB2535CTL operates based on the Schottky barrier principle, where the metal-semiconductor junction allows for faster switching and lower forward voltage drop compared to conventional PN-junction diodes. When forward biased, it conducts current with minimal voltage drop, making it suitable for high-efficiency applications.

Detailed Application Field Plans

The MBRB2535CTL finds extensive use in the following applications: - Power supplies and converters - Voltage clamping and protection circuits - Freewheeling diodes in inductive load circuits - Reverse polarity protection in automotive and industrial systems

Detailed and Complete Alternative Models

Some alternative models to the MBRB2535CTL include: - SS34: Similar characteristics with a lower current rating - SB340: Higher current rating but with slightly higher forward voltage drop - MBRB2545CTL: Higher voltage rating with similar current capacity

In conclusion, the MBRB2535CTL is a versatile Schottky Barrier Rectifier offering high efficiency, fast switching, and low leakage current. Its applications span across various industries, making it a popular choice for power supply and voltage regulation needs.

Word count: 498

Senaraikan 10 soalan dan jawapan biasa yang berkaitan dengan aplikasi MBRB2535CTL dalam penyelesaian teknikal

  1. What is MBRB2535CTL?

    • MBRB2535CTL is a Schottky barrier rectifier diode designed for high efficiency and low power loss in applications such as switching power supplies, converters, freewheeling diodes, and reverse battery protection.

  2. What is the maximum forward voltage of MBRB2535CTL?

    • The maximum forward voltage of MBRB2535CTL is typically 0.55V at 12.5A.

  3. What is the reverse voltage rating of MBRB2535CTL?

    • MBRB2535CTL has a reverse voltage rating of 35V.

  4. What is the typical junction capacitance of MBRB2535CTL?

    • The typical junction capacitance of MBRB2535CTL is 300pF at 4V, 1MHz.

  5. What are the typical applications of MBRB2535CTL?

    • Typical applications of MBRB2535CTL include DC/DC converters, freewheeling diodes, OR-ing diodes, and reverse battery protection.

  6. What is the operating temperature range of MBRB2535CTL?

    • MBRB2535CTL has an operating temperature range of -65°C to +175°C.

  7. What is the package type of MBRB2535CTL?

    • MBRB2535CTL is available in a TO-220AB package.

  8. What are the key features of MBRB2535CTL?

    • Key features of MBRB2535CTL include low forward voltage drop, high current capability, high surge capacity, and high junction temperature.

  9. What are the recommended storage conditions for MBRB2535CTL?

    • It is recommended to store MBRB2535CTL in a dry environment with a temperature range of -55°C to +175°C.

  10. What are the important considerations when designing with MBRB2535CTL?

    • When designing with MBRB2535CTL, it's important to consider thermal management, proper PCB layout, and adherence to recommended operating conditions to ensure optimal performance and reliability.